lkml.org 
[lkml]   [2012]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 1/3] davinci: vpss: dm365: enable ISP registers
Hi Sakari,

Thanks for the quick review.

On Thu, Nov 29, 2012 at 1:38 AM, Sakari Ailus <sakari.ailus@iki.fi> wrote:
> On Wed, Nov 28, 2012 at 04:25:32PM +0530, Prabhakar Lad wrote:
>> From: Manjunath Hadli <manjunath.hadli@ti.com>
>>
>> enable PPCR, enbale ISIF out on BCR and disable all events to
>> get the correct operation from ISIF.
>>
>> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
>> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
>> ---
>> drivers/media/platform/davinci/vpss.c | 13 +++++++++++++
>> 1 files changed, 13 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/media/platform/davinci/vpss.c b/drivers/media/platform/davinci/vpss.c
>> index 146e4b0..34ad7bd 100644
>> --- a/drivers/media/platform/davinci/vpss.c
>> +++ b/drivers/media/platform/davinci/vpss.c
>> @@ -52,9 +52,11 @@ MODULE_AUTHOR("Texas Instruments");
>> #define DM355_VPSSBL_EVTSEL_DEFAULT 0x4
>>
>> #define DM365_ISP5_PCCR 0x04
>> +#define DM365_ISP5_BCR 0x08
>> #define DM365_ISP5_INTSEL1 0x10
>> #define DM365_ISP5_INTSEL2 0x14
>> #define DM365_ISP5_INTSEL3 0x18
>> +#define DM365_ISP5_EVTSEL 0x1c
>> #define DM365_ISP5_CCDCMUX 0x20
>> #define DM365_ISP5_PG_FRAME_SIZE 0x28
>> #define DM365_VPBE_CLK_CTRL 0x00
>> @@ -357,6 +359,10 @@ void dm365_vpss_set_pg_frame_size(struct vpss_pg_frame_size frame_size)
>> }
>> EXPORT_SYMBOL(dm365_vpss_set_pg_frame_size);
>>
>> +#define DM365_ISP5_EVTSEL_EVT_DISABLE 0x00000000
>> +#define DM365_ISP5_BCR_ISIF_OUT_ENABLE 0x00000002
>> +#define DM365_ISP5_PCCR_CLK_ENABLE 0x0000007f
>> +
>
> How about defining these next to the register definitions themselves? There
> also seems to be one EVTSEL bit defined in the beginning of the first chunk.
> Please group these.
>
Ok I'll move them to the top. These are bit definitions, maybe using BIT()
could be better ?

> For that matter --- IMO you could just write zero to the register, without
> defining it a name, if the purpose of the register is to select something
> based on bits that are set.
>
Ok.

>> static int __devinit vpss_probe(struct platform_device *pdev)
>> {
>> struct resource *r1, *r2;
>> @@ -426,9 +432,16 @@ static int __devinit vpss_probe(struct platform_device *pdev)
>> oper_cfg.hw_ops.enable_clock = dm365_enable_clock;
>> oper_cfg.hw_ops.select_ccdc_source = dm365_select_ccdc_source;
>> /* Setup vpss interrupts */
>> + isp5_write((isp5_read(DM365_ISP5_PCCR) |
>> + DM365_ISP5_PCCR_CLK_ENABLE), DM365_ISP5_PCCR);
>> + isp5_write((isp5_read(DM365_ISP5_BCR) |
>> + DM365_ISP5_BCR_ISIF_OUT_ENABLE), DM365_ISP5_BCR);
>> isp5_write(DM365_ISP5_INTSEL1_DEFAULT, DM365_ISP5_INTSEL1);
>> isp5_write(DM365_ISP5_INTSEL2_DEFAULT, DM365_ISP5_INTSEL2);
>> isp5_write(DM365_ISP5_INTSEL3_DEFAULT, DM365_ISP5_INTSEL3);
>> + /* No event selected */
>> + isp5_write((isp5_read(DM365_ISP5_EVTSEL) |
>> + DM365_ISP5_EVTSEL_EVT_DISABLE), DM365_ISP5_EVTSEL);
>
> What's this? You're reading the value of the register, orring that with zero
> and writing it back? :-)
>
My Bad I'll remove it.

Regards,
--Prabhakar

>> } else
>> oper_cfg.hw_ops.clear_wbl_overflow = dm644x_clear_wbl_overflow;
>>
>
> --
> Regards,
>
> Sakari Ailus
> e-mail: sakari.ailus@iki.fi XMPP: sailus@retiisi.org.uk


\
 
 \ /
  Last update: 2012-11-29 04:21    [W:0.252 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site