lkml.org 
[lkml]   [2012]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] rtc: sa1100: enable/disable rtc when probe/remove the device
Date
The original sa1100_rtc_open/sa1100_rtc_release will be called
when the /dev/rtc0 is opened or closed.
In fact, these two functions will enable/disable the clock, and
register/unregister the irqs.
User application will use /dev/rtc0 to read the rtc time or set
the alarm. The rtc should still run indepent of open/close the
rtc device.
So only enable clock and register the irqs when probe the device,
and disable clock and unregister the irqs when remove the device.

Signed-off-by: Chao Xie <chao.xie@marvell.com>
---
drivers/rtc/rtc-sa1100.c | 9 +++++++--
1 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 50a5c4a..e933327 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -218,8 +218,6 @@ static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
}

static const struct rtc_class_ops sa1100_rtc_ops = {
- .open = sa1100_rtc_open,
- .release = sa1100_rtc_release,
.read_time = sa1100_rtc_read_time,
.set_time = sa1100_rtc_set_time,
.read_alarm = sa1100_rtc_read_alarm,
@@ -253,6 +251,10 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
spin_lock_init(&info->lock);
platform_set_drvdata(pdev, info);

+ ret = sa1100_rtc_open(&pdev->dev);
+ if (ret)
+ goto err_open;
+
/*
* According to the manual we should be able to let RTTR be zero
* and then a default diviser for a 32.768KHz clock is used.
@@ -305,7 +307,9 @@ static int sa1100_rtc_probe(struct platform_device *pdev)

return 0;
err_dev:
+ sa1100_rtc_release(&pdev->dev);
platform_set_drvdata(pdev, NULL);
+err_open:
clk_put(info->clk);
err_clk:
kfree(info);
@@ -318,6 +322,7 @@ static int sa1100_rtc_remove(struct platform_device *pdev)

if (info) {
rtc_device_unregister(info->rtc);
+ sa1100_rtc_release(&pdev->dev);
clk_put(info->clk);
platform_set_drvdata(pdev, NULL);
kfree(info);
--
1.7.4.1


\
 
 \ /
  Last update: 2012-11-29 04:01    [W:0.292 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site