Messages in this thread Patch in this message | | | From | Mark Brown <> | Subject | [PATCH 2/4] regulator: arizona-ldo1: Support DVFS in default constraints | Date | Wed, 28 Nov 2012 17:25:32 +0000 |
| |
Some Arizona devices such as the WM5102 can use DVFS on their digital core, for these devices allow the voltage range to vary in the default setup.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> --- drivers/regulator/arizona-ldo1.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c index 908996a..a1e0451 100644 --- a/drivers/regulator/arizona-ldo1.c +++ b/drivers/regulator/arizona-ldo1.c @@ -61,6 +61,16 @@ static const struct regulator_desc arizona_ldo1 = { .owner = THIS_MODULE, }; +static const struct regulator_init_data arizona_ldo1_dvfs = { + .constraints = { + .min_uV = 1200000, + .max_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = 1, +}; + static const struct regulator_init_data arizona_ldo1_default = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, @@ -88,7 +98,15 @@ static int arizona_ldo1_probe(struct platform_device *pdev) * default init_data for it. This will be overridden with * platform data if provided. */ - ldo1->init_data = arizona_ldo1_default; + switch (arizona->type) { + case WM5102: + ldo1->init_data = arizona_ldo1_dvfs; + break; + default: + ldo1->init_data = arizona_ldo1_default; + break; + } + ldo1->init_data.consumer_supplies = &ldo1->supply; ldo1->supply.supply = "DCVDD"; ldo1->supply.dev_name = dev_name(arizona->dev); -- 1.7.10.4
| |