lkml.org 
[lkml]   [2012]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 11/42] ARM: shmobile: Register PFC platform device
Date
Hi Simon,

On Monday 26 November 2012 10:02:05 Simon Horman wrote:
> On Wed, Nov 21, 2012 at 01:43:15PM +0100, Laurent Pinchart wrote:
> > On Wednesday 21 November 2012 14:16:33 Simon Horman wrote:
> > > On Wed, Nov 21, 2012 at 03:27:12AM +0100, Laurent Pinchart wrote:
> > > > Add arch code to register the PFC platform device instead of calling
> > > > the driver directly. Platform device registration in the sh-pfc driver
> > > > will be removed.
> > >
> > > I'm not really sure that I understand the motivation for
> > > moving platform device registration from the driver into
> > > mach-shmobile. Could you explain this a little?
> >
> > Sure.
> >
> > The traditional device model associates a driver with a device. For
> > historical reasons mach-shmobile doesn't define and register a platform
> > device for PFC hardware but calls an initialization function directly in
> > the PFC driver, passing it what is essentially platform data, including
> > resources.
> >
> > The PFC driver needs a struct device to pass to the pinctrl subsystem. As
> > no struct device corresponding to the hardware is created by
> > mach-shmobile, the driver creates one, registers it and registers itself
> > as a platform driver. The probe function is thus called synchronously,
> > with a valid struct platform_device.
> >
> > This is a hack that can't support device tree based instantiation, as the
> > platform device will be created when the platform is populated from the DT
> > in that case. To support DT (and to remove the hack), I've moved platform
> > device registration to mach-shmobile as it should be, like already done
> > for all (or most, I haven't checked if there's no similar hacks in other
> > drivers) the platform devices. This allows converting a board to DT by
> > just adding the PFC device node in the DT and removing the platform
> > device registration call in board code.
> >
> > I hope this made the intend of this part of the patch series clear. If
> > not, just tell me and I'll try to provide more explanations.
>
> Thanks Laurent,
>
> as it happens I was doing some work on pinmux and DT in as part of
> my kzm9g series, so what you describe above now makes a lot of sense to me.
>
> For this and all the other shmobile patches in this series:
>
> Acked-by: Simon Horman <horms@verge.net.au>

Thank you. I'll post a v2 of the patch set with board patches split per-SoC as
requested by Magnus to make backporting easier. As the shmobile will
significantly change, could you send me your ack on v2 ?

> BTW, my kzm9g work is not intended to conflict with your work in any way
> and I apologise if it does. I was just trying to make something quickly to
> allow kzm9g DT work to move a little further forward. I very much welcome
> your work in this area and naturally the kzm9g will use it once it is ready.

No worries. I'll handle the conflict. Do you plan to push it for v3.8 or v3.9
?

--
Regards,

Laurent Pinchart



\
 
 \ /
  Last update: 2012-11-26 12:21    [W:0.078 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site