lkml.org 
[lkml]   [2012]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/4] thermal: Add new thermal trend type to support quick cooling
From
Date
On Fri, 2012-11-23 at 09:35 +0530, Amit Kachhap wrote:
> On 22 November 2012 13:42, Zhang Rui <rui.zhang@intel.com> wrote:
> > On Thu, 2012-11-22 at 10:11 +0530, Amit Kachhap wrote:
> >> On 22 November 2012 06:52, Zhang Rui <rui.zhang@intel.com> wrote:
> >> > On Thu, 2012-11-08 at 09:56 +0530, Amit Daniel Kachhap wrote:
> >> >> This modification adds 2 new thermal trend type THERMAL_TREND_RAISE_FULL
> >> >> and THERMAL_TREND_DROP_FULL. This thermal trend can be used to quickly
> >> >> jump to the upper or lower cooling level instead of incremental increase
> >> >> or decrease. This is needed for temperature sensors which support rising/falling
> >> >> threshold interrupts and polling can be totally avoided.
> >> >>
> >> >> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
> >> >> Signed-off-by: Amit Daniel Kachhap <amit.kachhap@linaro.org>
> >> >> ---
> >> >> drivers/thermal/step_wise.c | 19 +++++++++++++++----
> >> >> include/linux/thermal.h | 2 ++
> >> >> 2 files changed, 17 insertions(+), 4 deletions(-)
> >> >>
> >> >> diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c
> >> >> index 1242cff..0d2d8d6 100644
> >> >> --- a/drivers/thermal/step_wise.c
> >> >> +++ b/drivers/thermal/step_wise.c
> >> >> @@ -35,6 +35,10 @@
> >> >> * state for this trip point
> >> >> * b. if the trend is THERMAL_TREND_DROPPING, use lower cooling
> >> >> * state for this trip point
> >> >> + * c. if the trend is THERMAL_TREND_RAISE_FULL, use highest cooling
> >> >> + * state for this trip point
> >> >> + * d. if the trend is THERMAL_TREND_DROP_FULL, use lowest cooling
> >> >> + * state for this trip point
> >> >> */
> >> >> static unsigned long get_target_state(struct thermal_instance *instance,
> >> >> enum thermal_trend trend)
> >> >> @@ -50,7 +54,10 @@ static unsigned long get_target_state(struct thermal_instance *instance,
> >> >> } else if (trend == THERMAL_TREND_DROPPING) {
> >> >> cur_state = cur_state > instance->lower ?
> >> >> (cur_state - 1) : instance->lower;
> >> >> - }
> >> >> + } else if (trend == THERMAL_TREND_RAISE_FULL)
> >> >> + cur_state = instance->upper;
> >> >> + else if (trend == THERMAL_TREND_DROP_FULL)
> >> >> + cur_state = instance->lower;
> >> >>
> >> >> return cur_state;
> >> >> }
> >> >> @@ -87,7 +94,8 @@ static void update_instance_for_throttle(struct thermal_zone_device *tz,
> >> >> }
> >> >>
> >> >> static void update_instance_for_dethrottle(struct thermal_zone_device *tz,
> >> >> - int trip, enum thermal_trip_type trip_type)
> >> >> + int trip, enum thermal_trip_type trip_type,
> >> >> + enum thermal_trend trend)
> >> >> {
> >> >> struct thermal_instance *instance;
> >> >> struct thermal_cooling_device *cdev;
> >> >> @@ -101,7 +109,10 @@ static void update_instance_for_dethrottle(struct thermal_zone_device *tz,
> >> >> cdev = instance->cdev;
> >> >> cdev->ops->get_cur_state(cdev, &cur_state);
> >> >>
> >> >> - instance->target = cur_state > instance->lower ?
> >> >> + if (trend == THERMAL_TREND_DROP_FULL)
> >> >> + instance->target = instance->lower;
> >> >> + else
> >> >> + instance->target = cur_state > instance->lower ?
> >> >> (cur_state - 1) : THERMAL_NO_TARGET;
> >> >>
> >> > what do you expect to happen if the trend is THERMAL_TREND_RAISE_FULL at
> >> > this time?
> >> >
> >> Hi Rui,
> >>
> >> I suppose this is dethrotle routine and hence this will be called when
> >> only drop in temperature happens. Also I did not used get_target_state
> >> here because I thought it might cause regression in the other existing
> >> thermal drivers(I am not sure) But I guess calling get_target_state is
> >> the good way to know next target state and is fine if you agree.
> >> Also one suggestion, 2 functions for throttle/dethrottle can be merged
> >> as both look same and just get_target_state can be used in that
> >> function
> >>
> > agree.
> > patches have been refreshed, please review.
>
> Thanks Rui, Your patches looks nice. I will re-base my patches against
> your implementation and submit them shortly.
>
great. please rebase your patch on top of thermal-thermal tree.

thanks,
rui



\
 
 \ /
  Last update: 2012-11-23 08:01    [W:0.059 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site