lkml.org 
[lkml]   [2012]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/7] i2c: s3c2410: Move location of clk_prepare_enable() call in probe function
Date
In probe call, only s3c24xx_i2c_init() needs the I2C clock to be enabled.
Moving clk_prepare_enable() and clk_disable_unprepare() calls to around
this function simplifies the return path of probe call.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
---
drivers/i2c/busses/i2c-s3c2410.c | 29 ++++++++++++-----------------
1 files changed, 12 insertions(+), 17 deletions(-)

diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 3e4143c..707efaf 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -976,15 +976,13 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)

dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);

- clk_prepare_enable(i2c->clk);

/* map the registers */

res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(&pdev->dev, "cannot find IO resource\n");
- ret = -ENOENT;
- goto err_clk;
+ return -ENOENT;
}

i2c->ioarea = devm_request_mem_region(&pdev->dev, res->start,
@@ -992,16 +990,14 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)

if (i2c->ioarea == NULL) {
dev_err(&pdev->dev, "cannot request IO\n");
- ret = -ENXIO;
- goto err_clk;
+ return -ENXIO;
}

i2c->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));

if (i2c->regs == NULL) {
dev_err(&pdev->dev, "cannot map IO\n");
- ret = -ENXIO;
- goto err_clk;
+ return -ENXIO;
}

dev_dbg(&pdev->dev, "registers %p (%p, %p)\n",
@@ -1014,10 +1010,13 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)

/* initialise the i2c controller */

+ clk_prepare_enable(i2c->clk);
ret = s3c24xx_i2c_init(i2c);
- if (ret != 0)
- goto err_clk;
-
+ clk_disable_unprepare(i2c->clk);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "I2C controller init failed\n");
+ return ret;
+ }
/* find the IRQ for this unit (note, this relies on the init call to
* ensure no current IRQs pending
*/
@@ -1025,7 +1024,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
i2c->irq = ret = platform_get_irq(pdev, 0);
if (ret <= 0) {
dev_err(&pdev->dev, "cannot find IRQ\n");
- goto err_clk;
+ return ret;
}

ret = devm_request_irq(&pdev->dev, i2c->irq, s3c24xx_i2c_irq, 0,
@@ -1033,13 +1032,13 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)

if (ret != 0) {
dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
- goto err_clk;
+ return ret;
}

ret = s3c24xx_i2c_register_cpufreq(i2c);
if (ret < 0) {
dev_err(&pdev->dev, "failed to register cpufreq notifier\n");
- goto err_clk;
+ return ret;
}

/* Note, previous versions of the driver used i2c_add_adapter()
@@ -1064,14 +1063,10 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
pm_runtime_enable(&i2c->adap.dev);

dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
- clk_disable_unprepare(i2c->clk);
return 0;

err_cpufreq:
s3c24xx_i2c_deregister_cpufreq(i2c);
-
- err_clk:
- clk_disable_unprepare(i2c->clk);
return ret;
}

--
1.7.4.1


\
 
 \ /
  Last update: 2012-11-23 07:41    [W:0.055 / U:2.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site