lkml.org 
[lkml]   [2012]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v4 16/31] loop: use aio to perform io on the underlying file
On Wed, Nov 21, 2012 at 04:40:56PM -0600, Dave Kleikamp wrote:
> From: Zach Brown <zab@zabbo.net>
>
> This uses the new kernel aio interface to process loopback IO by
> submitting concurrent direct aio. Previously loop's IO was serialized
> by synchronous processing in a thread.
>
> The aio operations specify the memory for the IO with the bio_vec arrays
> directly instead of mappings of the pages.
>
> The use of aio operations is enabled when the backing file supports the
> read_iter and write_iter methods. These methods must only be added when
> O_DIRECT on bio_vecs is supported.
>
> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
> Cc: Zach Brown <zab@zabbo.net>

I suspect aio iocompetion here doesn't work for FUA write IO.

> +#ifdef CONFIG_AIO
> +static void lo_rw_aio_complete(u64 data, long res)
> +{
> + struct bio *bio = (struct bio *)(uintptr_t)data;
> +
> + if (res > 0)
> + res = 0;
> + else if (res < 0)
> + res = -EIO;
> +
> + bio_endio(bio, res);
> +}

This effectively does nothing...

> @@ -413,37 +456,6 @@ static int do_bio_filebacked(struct loop_device *lo, struct bio *bio)
> if (bio_rw(bio) == WRITE) {
> struct file *file = lo->lo_backing_file;
>
> - if (bio->bi_rw & REQ_FLUSH) {
> - ret = vfs_fsync(file, 0);
> - if (unlikely(ret && ret != -EINVAL)) {
> - ret = -EIO;
> - goto out;
> - }
> - }
> -
> - /*
> - * We use punch hole to reclaim the free space used by the
> - * image a.k.a. discard. However we do not support discard if
> - * encryption is enabled, because it may give an attacker
> - * useful information.
> - */
> - if (bio->bi_rw & REQ_DISCARD) {
> - struct file *file = lo->lo_backing_file;
> - int mode = FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE;
> -
> - if ((!file->f_op->fallocate) ||
> - lo->lo_encrypt_key_size) {
> - ret = -EOPNOTSUPP;
> - goto out;
> - }
> - ret = file->f_op->fallocate(file, mode, pos,
> - bio->bi_size);
> - if (unlikely(ret && ret != -EINVAL &&
> - ret != -EOPNOTSUPP))
> - ret = -EIO;
> - goto out;
> - }
> -
> ret = lo_send(lo, bio, pos);
>
> if ((bio->bi_rw & REQ_FUA) && !ret) {

And as you can see here that after writing the data in the filebacked
path, there's special handling for REQ_FUA (i.e. another fsync).
....

> @@ -512,7 +546,29 @@ static inline void loop_handle_bio(struct loop_device *lo, struct bio *bio)
> do_loop_switch(lo, bio->bi_private);
> bio_put(bio);
> } else {
> - int ret = do_bio_filebacked(lo, bio);
> + int ret;
> +
> + if (bio_rw(bio) == WRITE) {
> + if (bio->bi_rw & REQ_FLUSH) {
> + ret = vfs_fsync(lo->lo_backing_file, 1);
> + if (unlikely(ret && ret != -EINVAL))
> + goto out;
> + }
> + if (bio->bi_rw & REQ_DISCARD) {
> + ret = lo_discard(lo, bio);
> + goto out;
> + }
> + }
> +#ifdef CONFIG_AIO
> + if (lo->lo_flags & LO_FLAGS_USE_AIO &&
> + lo->transfer == transfer_none) {
> + ret = lo_rw_aio(lo, bio);
> + if (ret == 0)
> + return;
> + } else
> +#endif
> + ret = do_bio_filebacked(lo, bio);
> +out:

And this extra fsync is now not done in the aio path. I.e. the AIO
completion path needs to issue the fsync to maintain correct REQ_FUA
semantics...

Cheers,

Dave.
--
Dave Chinner
david@fromorbit.com


\
 
 \ /
  Last update: 2012-11-23 00:41    [W:0.638 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site