lkml.org 
[lkml]   [2012]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/3] ARM: zynq: ARCH_MULTIPLATFORM support
On Tue, Nov 20, 2012 at 01:30:58PM +0100, Michal Simek wrote:
> Hi Josh, Arnd and Olof,
>
> 2012/11/19 Josh Cartwright <josh.cartwright@ni.com>:
> > Michal-
> >
> > Here's an attempt at supporting ARCH_MULTIPLATFORM on Zynq. I've gotten
> > a multiplatform kernel building and booting on the zc702, although I
> > haven't tried to boot the same image on another non-Zynq board, due to
> > lack of available hardware.
> >
> > It would be super awesome if this set could land in 3.8, but I know
> > we're running out of time there. I wouldn't be too heartbroken if it
> > didn't make it.
> >
> > This patchset is on top of your arm-next branch and with the
> > debug_ll_init support patch @ arm-soc/devel/debug_ll_init.
> >
> > Patch 1 drops the early TTC mapping. It is not necessary, since the TTC
> > driver now supports pulling mapping info from the device tree.
> >
> > Patch 2 converts zynq to use the debug_ll_init() infrastructure slated
> > to go into 3.8.
> >
> > Patch 3 is the bulk of the set, moving around logic around within
> > mach-zynq/include, and setting up the necessary build magic to get Zynq
> > building w/ CONFIG_ARCH_MULTIPLATFORM.
> >
>
> I wanted to look at it too today. You were faster!
> I have tested your patches and all works for me.
> I have also added them to my arm-next branch.
>
> I don't have others ARM boards to test but it shouldn't be big problem
> because others will test it.
>
> We are out of merge window that's why we should wait to the next one.
> Anyway Arnd/Olof if there is any option to get this to v3.8, please let me know.

Feel free to post a pull request, if things look clean we can probably pick it up.


-Olof (playing good cop for once :-)


\
 
 \ /
  Last update: 2012-11-21 09:01    [W:0.060 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site