Messages in this thread | | | Date | Wed, 21 Nov 2012 14:50:27 +0000 | From | Alan Cox <> | Subject | Re: |
| |
> Anyway, the small LVDS one works fine so far, at least when I hardcode the > panel resolution (there's no VBT etc. in BIOS yet). However, the SDVO one > stays black. No wonder, as there's no SDVO code in the Oaktrail part of the > driver.
Indeed - the Oaktrail processors don't have SDVO support. E6xx happens to be very similar to Oaktrail so the LVDS works. No idea about HDMI.
> So I tried to add this... and simply started with adding a call to > psb_intel_sdvo_init() in oaktrail_output_init(), to see what happens. The > result: it doesn't find anything :-( I could track problems down to the point > that the SDVO i2c registers seem to be the wrong ones. > > At the known offsets for i2c regs (0x5100 and on) I see only 0xffffffff, so > probably these registers are not present or somewhere else on my platform. > > Does anybody of you have any infos on this? How can I get further? > Thanks for any help in advance!
There is an Intel driver with open kernel code and proprietary userspace for the Imagination 3D engine (EMGD) although only for an out of maintenance Fedora and for Meego and in both cases for ancient kernels.
The fully open driver is built by extracting the relevant information and code from these releases.
http://www.intel.com/p/en_US/embedded/hwsw/software/emgd#download
If you unpack that it contains a tar ball which you can unpack which contains the driver.
emgd/pal/sdvo
looks kind of promising.
| |