lkml.org 
[lkml]   [2012]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] ARM: ux500: Disable the MMCI gpio-regulator by default
On Thu, 15 Nov 2012, Lee Jones wrote:

> Not all supported boards will require a MMCI gpio-regulator,
> therefore it's a good idea to only enable the node when and if
> it is required. Let's disable it by default.
>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
> arch/arm/boot/dts/dbx5x0.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
> index 7ce45fc..d8ba489 100644
> --- a/arch/arm/boot/dts/dbx5x0.dtsi
> +++ b/arch/arm/boot/dts/dbx5x0.dtsi
> @@ -642,6 +642,8 @@
> gpio-enable = <&tc3589x_gpio 17 0x4>;
> states = <1800000 0x1
> 2900000 0x0>;
> +
> + status = "disabled";
> };
> };
> };
> --
> 1.7.9.5
>

Prod for Linus.

--
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2012-11-21 07:21    [W:0.060 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site