lkml.org 
[lkml]   [2012]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/4] ARM: Dove: Convert to DT GPIO and pinctrl
Date
Following the ongoing conversion of Orion SoCs to DT, make use of
gpio and pinctrl drivers through DT. The main dtsi for Dove is prepared
to allow board specific descriptors to make use of pinctrl muxing.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Axel Lin <axel.lin@ingics.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
arch/arm/Kconfig | 2 ++
arch/arm/boot/dts/dove.dtsi | 20 +++++++++++++++++---
2 files changed, 19 insertions(+), 3 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d5a28da..bb9a85d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -539,6 +539,8 @@ config ARCH_DOVE
select CPU_V7
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
+ select PINCTRL
+ select PINCTRL_DOVE
select PLAT_ORION_LEGACY
select USB_ARCH_HAS_EHCI
help
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 8c8ab62..c457480 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -4,6 +4,12 @@
compatible = "marvell,dove";
model = "Marvell Armada 88AP510 SoC";

+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ };
+
soc@f1000000 {
compatible = "simple-bus";
#address-cells = <1>;
@@ -85,7 +91,8 @@
#gpio-cells = <2>;
gpio-controller;
reg = <0xd0400 0x20>;
- ngpio = <32>;
+ ngpios = <32>;
+ interrupt-controller;
interrupts = <12>, <13>, <14>, <60>;
};

@@ -94,7 +101,8 @@
#gpio-cells = <2>;
gpio-controller;
reg = <0xd0420 0x20>;
- ngpio = <32>;
+ ngpios = <32>;
+ interrupt-controller;
interrupts = <61>;
};

@@ -103,7 +111,13 @@
#gpio-cells = <2>;
gpio-controller;
reg = <0xe8400 0x0c>;
- ngpio = <8>;
+ ngpios = <8>;
+ };
+
+ pinctrl: pinctrl@d0200 {
+ compatible = "marvell,dove-pinctrl";
+ reg = <0xd0200 0x10>;
+ clocks = <&gate_clk 22>;
};

spi0: spi@10600 {
--
1.7.10.4


\
 
 \ /
  Last update: 2012-11-19 11:21    [W:0.729 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site