lkml.org 
[lkml]   [2012]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v6] staging: ste_rmi4: Convert to Type-B support
Convert to MT-B because Synaptics touch devices are capable
of tracking identifiable fingers.

Signed-off-by: Alexandra Chin <alexandra.chin@tw.synaptics.com>
---
This patch was tested on Pandaboard.

Changes from v6:
- Incorporated Henrik's review comments
*remove irrelevant changes within the patch

Changes from v5:
- Incorporated Henrik's review comments
*rollback to v3 from v4
*fix odd line break in v3

Changes from v4:
- Incorporated Henrik's review comments
*split function synpatics_rmi4_touchscreen_report
*split function synaptics_rmi4_i2c_query_device

Changes from v3:
- Incorporated Henrik's review comments
*remove 'else' after an error path return
*add input_mt_sync_frame() for pointer emulation effects
*correct names of touchscreen
- Replace printk with dev_err

Changes from v2:
- Incorporated Henrik's review comments
*directly report finger state with Type-B
- Against 3.7-rcX
*call input_mt_init_slots with INPUT_MT_DIRECT flag
---
drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c | 76 +++++++++++--------------
1 files changed, 33 insertions(+), 43 deletions(-)

diff --git a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
index 277491a..ed304e0 100644
--- a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
+++ b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
@@ -31,6 +31,7 @@
#include <linux/interrupt.h>
#include <linux/regulator/consumer.h>
#include <linux/module.h>
+#include <linux/input/mt.h>
#include "synaptics_i2c_rmi4.h"

/* TODO: for multiple device support will need a per-device mutex */
@@ -67,7 +68,6 @@
#define PDT_START_SCAN_LOCATION (0x00E9)
#define PDT_END_SCAN_LOCATION (0x000A)
#define PDT_ENTRY_SIZE (0x0006)
-#define RMI4_NUMBER_OF_MAX_FINGERS (8)
#define SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM (0x11)
#define SYNAPTICS_RMI4_DEVICE_CONTROL_FUNC_NUM (0x01)

@@ -164,6 +164,7 @@ struct synaptics_rmi4_device_info {
* @regulator: pointer to the regulator structure
* @wait: wait queue structure variable
* @touch_stopped: flag to stop the thread function
+ * @fingers_supported: maximum supported fingers
*
* This structure gives the device data information.
*/
@@ -184,6 +185,7 @@ struct synaptics_rmi4_data {
struct regulator *regulator;
wait_queue_head_t wait;
bool touch_stopped;
+ unsigned char fingers_supported;
};

/**
@@ -303,22 +305,21 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
/* number of touch points - fingers down in this case */
int touch_count = 0;
int finger;
- int fingers_supported;
int finger_registers;
int reg;
int finger_shift;
int finger_status;
int retval;
+ int x, y;
+ int wx, wy;
unsigned short data_base_addr;
unsigned short data_offset;
unsigned char data_reg_blk_size;
unsigned char values[2];
unsigned char data[DATA_LEN];
- int x[RMI4_NUMBER_OF_MAX_FINGERS];
- int y[RMI4_NUMBER_OF_MAX_FINGERS];
- int wx[RMI4_NUMBER_OF_MAX_FINGERS];
- int wy[RMI4_NUMBER_OF_MAX_FINGERS];
+ unsigned char fingers_supported = pdata->fingers_supported;
struct i2c_client *client = pdata->i2c_client;
+ struct input_dev *input_dev = pdata->input_dev;

/* get 2D sensor finger data */
/*
@@ -333,7 +334,6 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
* 10 = finger present but data may not be accurate,
* 11 = reserved for product use.
*/
- fingers_supported = rfi->num_of_data_points;
finger_registers = (fingers_supported + 3)/4;
data_base_addr = rfi->fn_desc.data_base_addr;
retval = synaptics_rmi4_i2c_block_read(pdata, data_base_addr, values,
@@ -358,7 +358,11 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
* if finger status indicates a finger is present then
* read the finger data and report it
*/
- if (finger_status == 1 || finger_status == 2) {
+ input_mt_slot(input_dev, finger);
+ input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
+ finger_status != 0);
+
+ if (finger_status) {
/* Read the finger data */
data_offset = data_base_addr +
((finger * data_reg_blk_size) +
@@ -367,50 +371,33 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
data_offset, data,
data_reg_blk_size);
if (retval != data_reg_blk_size) {
- printk(KERN_ERR "%s:read data failed\n",
+ dev_err(&client->dev, "%s:read data failed\n",
__func__);
return 0;
- } else {
- x[touch_count] =
- (data[0] << 4) | (data[2] & MASK_4BIT);
- y[touch_count] =
- (data[1] << 4) |
- ((data[2] >> 4) & MASK_4BIT);
- wy[touch_count] =
- (data[3] >> 4) & MASK_4BIT;
- wx[touch_count] =
- (data[3] & MASK_4BIT);
-
- if (pdata->board->x_flip)
- x[touch_count] =
- pdata->sensor_max_x -
- x[touch_count];
- if (pdata->board->y_flip)
- y[touch_count] =
- pdata->sensor_max_y -
- y[touch_count];
}
+ x = (data[0] << 4) | (data[2] & MASK_4BIT);
+ y = (data[1] << 4) | ((data[2] >> 4) & MASK_4BIT);
+ wy = (data[3] >> 4) & MASK_4BIT;
+ wx = (data[3] & MASK_4BIT);
+
+ if (pdata->board->x_flip)
+ x = pdata->sensor_max_x - x;
+ if (pdata->board->y_flip)
+ y = pdata->sensor_max_y - y;
+
+ input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
+ max(wx, wy));
+ input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+ input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+
/* number of active touch points */
touch_count++;
}
}

- /* report to input subsystem */
- if (touch_count) {
- for (finger = 0; finger < touch_count; finger++) {
- input_report_abs(pdata->input_dev, ABS_MT_TOUCH_MAJOR,
- max(wx[finger] , wy[finger]));
- input_report_abs(pdata->input_dev, ABS_MT_POSITION_X,
- x[finger]);
- input_report_abs(pdata->input_dev, ABS_MT_POSITION_Y,
- y[finger]);
- input_mt_sync(pdata->input_dev);
- }
- } else
- input_mt_sync(pdata->input_dev);
-
/* sync after groups of events */
- input_sync(pdata->input_dev);
+ input_mt_sync_frame(input_dev);
+ input_sync(input_dev);
/* return the number of touch points */
return touch_count;
}
@@ -575,6 +562,7 @@ static int synpatics_rmi4_touchpad_detect(struct synaptics_rmi4_data *pdata,
if ((queries[1] & MASK_3BIT) == 5)
rfi->num_of_data_points = 10;
}
+ pdata->fingers_supported = rfi->num_of_data_points;
/* Need to get interrupt info for handling interrupts */
rfi->index_to_intr_reg = (interruptcount + 7)/8;
if (rfi->index_to_intr_reg != 0)
@@ -988,6 +976,8 @@ static int __devinit synaptics_rmi4_probe
rmi4_data->sensor_max_y, 0, 0);
input_set_abs_params(rmi4_data->input_dev, ABS_MT_TOUCH_MAJOR, 0,
MAX_TOUCH_MAJOR, 0, 0);
+ input_mt_init_slots(rmi4_data->input_dev,
+ rmi4_data->fingers_supported, 0);

/* Clear interrupts */
synaptics_rmi4_i2c_block_read(rmi4_data,
--
1.7.5.4


\
 
 \ /
  Last update: 2012-11-16 10:01    [W:1.742 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site