lkml.org 
[lkml]   [2012]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v6 0/4] Add generic driver for on-chip SRAM
Date
These patches add support to configure on-chip SRAM via device-tree
node or platform data and to obtain the resulting genalloc pool from
the physical address or a phandle pointing at the device tree node.
This allows drivers to allocate SRAM with the genalloc API without
hard-coding the genalloc pool pointer.

The on-chip SRAM on i.MX53 and i.MX6q can be registered via device tree
and changed to use the simple generic SRAM driver:

ocram: ocram@00900000 {
compatible = "fsl,imx-ocram", "sram";
reg = <0x00900000 0x3f000>;
};

A driver that needs to allocate SRAM buffers, like the video processing
unit on i.MX53, can retrieve the genalloc pool from a phandle in the
device tree using of_get_named_gen_pool(node, "iram", 0) from patch 1:

vpu@63ff4000 {
/* ... */
iram = <&ocram>;
};

Changes since v5:
- Addressed Paul Gortmaker's comments, merging the clock patch
into the SRAM driver patch.
- Hard coded the allocation granularity to 512 bytes and dropped
Matt Porter's patch for now. Whether or not this should be
configured in the device tree could use further discussion.
- Added a coda driver patch to use the genalloc API and, again,
the i.MX53/i.MX6 device tree patch to show the whole picture.

regards
Philipp

---
Documentation/devicetree/bindings/misc/sram.txt | 17 ++++
arch/arm/boot/dts/imx53.dtsi | 5 +
arch/arm/boot/dts/imx6q.dtsi | 6 ++
drivers/media/platform/Kconfig | 3 +-
drivers/media/platform/coda.c | 47 ++++++---
drivers/misc/Kconfig | 9 ++
drivers/misc/Makefile | 1 +
drivers/misc/sram.c | 121 +++++++++++++++++++++++
include/linux/genalloc.h | 14 +++
lib/genalloc.c | 67 +++++++++++++
10 files changed, 274 insertions(+), 16 deletions(-)



\
 
 \ /
  Last update: 2012-11-16 12:01    [W:0.102 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site