lkml.org 
[lkml]   [2012]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V5 1/2] Thermal: Add ST-Ericsson DB8500 thermal driver.
From
Date
On Fri, 2012-11-09 at 19:29 +0800, hongbo.zhang wrote:
> From: "hongbo.zhang" <hongbo.zhang@linaro.com>
>
> This driver is based on the thermal management framework in thermal_sys.c. A
> thermal zone device is created with the trip points to which cooling devices
> can be bound, the current cooling device is cpufreq, e.g. CPU frequency is
> clipped down to cool the CPU, and other cooling devices can be added and bound
> to the trip points dynamically. The platform specific PRCMU interrupts are
> used to active thermal update when trip points are reached.
>
> Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com>
> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
> Reviewed-by: Francesco Lavra <francescolavra.fl@gmail.com>

> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index e1cb6bd..54c8fd0 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -31,6 +31,26 @@ config CPU_THERMAL
> and not the ACPI interface.
> If you want this support, you should say Y here.
>
> +config DB8500_THERMAL
> + bool "DB8500 thermal management"

why is this bool?

thanks,
rui




\
 
 \ /
  Last update: 2012-11-15 09:41    [W:0.105 / U:1.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site