lkml.org 
[lkml]   [2012]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v2] mfd: arizona: Sync regcache after reset
In the absence of a physical reset line the chip is reset by writing the
first register, which is done after the register patch has been applied.
This patch synchronises the register cache after the reset to preserve
any register changes that had been applied.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/arizona-core.c | 8 ++++++++
1 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 202bf55..ad1ca49 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -415,11 +415,19 @@ int __devinit arizona_dev_init(struct arizona *arizona)

/* If we have a /RESET GPIO we'll already be reset */
if (!arizona->pdata.reset) {
+ regcache_mark_dirty(arizona->regmap);
+
ret = regmap_write(arizona->regmap, ARIZONA_SOFTWARE_RESET, 0);
if (ret != 0) {
dev_err(dev, "Failed to reset device: %d\n", ret);
goto err_reset;
}
+
+ ret = regcache_sync(arizona->regmap);
+ if (ret != 0) {
+ dev_err(dev, "Failed to sync device: %d\n", ret);
+ goto err_ldoena;
+ }
}

ret = arizona_wait_for_boot(arizona);
--
1.7.2.5


\
 
 \ /
  Last update: 2012-11-14 13:21    [W:0.053 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site