lkml.org 
[lkml]   [2012]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] ARM: tegra: Add Tegra20 host1x support
On Tue, Nov 13, 2012 at 04:00:47PM +0800, Mark Zhang wrote:
> On 11/13/2012 03:52 PM, Thierry Reding wrote:
> > * PGP Signed by an unknown key
> >
> > On Tue, Nov 13, 2012 at 03:45:00PM +0800, Mark Zhang wrote:
> >> On 11/09/2012 09:20 PM, Thierry Reding wrote:
> >>> @@ -116,6 +122,9 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
> >>> { "sbc2", "pll_p", 100000000, false },
> >>> { "sbc3", "pll_p", 100000000, false },
> >>> { "sbc4", "pll_p", 100000000, false },
> >>> + { "host1x", "pll_c", 144000000, false },
> >>> + { "disp1", "pll_p", 600000000, false },
> >>> + { "disp2", "pll_p", 600000000, false },
> >>
> >> I think here the parent of disp2 should be "pll_d_out0", not "pll_p".
> >> Right now pll_p has not a proper clock setting to make 148.5MHz 1080p
> >> HDMI happy. In addition, you add the 297MHz in pll_d frequency table
> >> next and I think this is for disp2 has a proper clock rate to support HDMI.
> > [...]
> >>> @@ -1051,6 +1053,9 @@ static struct clk_duplicate tegra_clk_duplicates[] = {
> >>> CLK_DUPLICATE("pll_p_out3", "tegra-i2c.1", "fast-clk"),
> >>> CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"),
> >>> CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"),
> >>> + CLK_DUPLICATE("pll_p", "tegra-dc.0", "parent"),
> >>> + CLK_DUPLICATE("pll_p", "tegra-dc.1", "parent"),
> >>> + CLK_DUPLICATE("pll_d_out0", "tegra-hdmi", "parent"),
> >>> };
> >>
> >> The same with my above comments, the tegra-dc.1's parent should be
> >> pll_d_out0.
> >
> > The way this works is that for HDMI it is required that the DC and HDMI
> > blocks have the same parent. So what really happens is that once you
> > setup one of the DCs to work with HDMI, its clock will automatically be
> > reparented to the HDMI parent clock, which in this case is "pll_d_out0".
> >
>
> Are you sure about this? Is this a hardware feature? I know the dc and
> hdmi controller should have the same clock parent but I think this
> should be ensured by device driver...

It's implemented in tegra_output_hdmi_setup_clock().

Thierry
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2012-11-13 09:41    [W:0.138 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site