lkml.org 
[lkml]   [2012]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 03/11] clk: davinci - common clk utilities to init clk driver
On 11/01/2012 08:41 AM, Sekhar Nori wrote:
> On 10/25/2012 9:41 PM, Murali Karicheri wrote:
>> This is the common clk driver initialization functions for DaVinci
>> SoCs and other SoCs that uses similar hardware architecture.
>> clock.h also defines struct types for clock definitions in a SoC
>> and clock data type for configuring clk-mux. The initialization
>> functions are used by clock initialization code in a specific
>> platform/SoC.
>>
>> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
>> +struct clk *davinci_plldiv_clk(const char *name, const char *parent,
>> + struct clk_plldiv_data *data)
>> +{
>> + /*
>> + * This is a PLL divider clock with divider specified by
>> + * div_reg in pll_div_data.
>> + */
>> + data->reg = ioremap(data->phys_div_reg, 4);
>> + if (WARN_ON(!data->reg))
>> + return NULL;
>> +
>> + return clk_register_davinci_plldiv(NULL, name, parent, data, &_lock);
> This function does not exist at this point. Looks like you need to swap
> 3/11 with 4/11. Also, you should also add build infrastructure
> (makefile, Kconfig) changes in the same patch that creates the file.
> There is no point in adding those separately.
>
> Thanks,
> Sekhar
>
Sekhar,

So the Makefile, Kconfig and new files should be in the same patch.
Also will re-order the 3/11 and 4/11 in the next revision.

Murali


\
 
 \ /
  Last update: 2012-11-01 20:21    [W:0.162 / U:1.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site