lkml.org 
[lkml]   [2012]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH V7 10/15] MIPS: Loongson: Add Loongson-3 Kconfig options
    Date
    Added Kconfig options include: Loongson-3 CPU and machine definition,
    CPU cache features, UEFI-like firmware interface, HT-linked PCI, and
    big memory support.

    Signed-off-by: Huacai Chen <chenhc@lemote.com>
    Signed-off-by: Hongliang Tao <taohl@lemote.com>
    Signed-off-by: Hua Yan <yanh@lemote.com>
    ---
    arch/mips/Kconfig | 26 ++++++++++++++++++++++
    arch/mips/loongson/Kconfig | 52 ++++++++++++++++++++++++++++++++++++++++++++
    2 files changed, 78 insertions(+), 0 deletions(-)

    diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
    index faf6528..647dbe2 100644
    --- a/arch/mips/Kconfig
    +++ b/arch/mips/Kconfig
    @@ -1572,6 +1572,16 @@ config CPU_LOONGSON2
    select CPU_SUPPORTS_64BIT_KERNEL
    select CPU_SUPPORTS_HIGHMEM

    +config CPU_LOONGSON3
    + bool "Loongson 3 CPU"
    + depends on SYS_HAS_CPU_LOONGSON3
    + select CPU_SUPPORTS_32BIT_KERNEL
    + select CPU_SUPPORTS_64BIT_KERNEL
    + select CPU_SUPPORTS_HIGHMEM
    + help
    + The Loongson 3 processor implements the MIPS III instruction set
    + with many extensions.
    +
    config CPU_LOONGSON1
    bool
    select CPU_MIPS32
    @@ -1598,6 +1608,11 @@ config SYS_HAS_CPU_LOONGSON2F
    select CPU_SUPPORTS_ADDRWINCFG if 64BIT
    select CPU_SUPPORTS_UNCACHED_ACCELERATED

    +config SYS_HAS_CPU_LOONGSON3
    + bool
    + select CPU_SUPPORTS_CPUFREQ
    + select CPU_SUPPORTS_COHERENT_CACHE
    +
    config SYS_HAS_CPU_LOONGSON1B
    bool

    @@ -1735,6 +1750,8 @@ config CPU_SUPPORTS_HUGEPAGES
    bool
    config CPU_SUPPORTS_UNCACHED_ACCELERATED
    bool
    +config CPU_SUPPORTS_COHERENT_CACHE
    + bool
    config MIPS_PGD_C0_CONTEXT
    bool
    default y if 64BIT && CPU_MIPSR2
    @@ -2400,6 +2417,15 @@ config PCI
    your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
    say Y, otherwise N.

    +config HT_PCI
    + bool "Support for HT-linked PCI"
    + select PCI_DOMAINS
    + help
    + Loongson family machines use Hyper-Transport bus for inter-core
    + connection and device connection. The PCI bus is a subordinate
    + linked at HT. Choose Y unless you are using Loongson 2E/2F based
    + machines.
    +
    config PCI_DOMAINS
    bool

    diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
    index 263beb9..dd951b8 100644
    --- a/arch/mips/loongson/Kconfig
    +++ b/arch/mips/loongson/Kconfig
    @@ -59,6 +59,33 @@ config LEMOTE_MACH2F

    These family machines include fuloong2f mini PC, yeeloong2f notebook,
    LingLoong allinone PC and so forth.
    +
    +config LEMOTE_MACH3A
    + bool "Lemote Loongson 3A family machines"
    + select ARCH_SPARSEMEM_ENABLE
    + select GENERIC_ISA_DMA_SUPPORT_BROKEN
    + select GENERIC_HARDIRQS_NO__DO_IRQ
    + select BOOT_ELF32
    + select BOARD_SCACHE
    + select CSRC_R4K
    + select CEVT_R4K
    + select CPU_HAS_WB
    + select HW_HAS_PCI
    + select ISA
    + select I8259
    + select IRQ_CPU
    + select SYS_HAS_CPU_LOONGSON3
    + select SYS_HAS_EARLY_PRINTK
    + select SYS_SUPPORTS_SMP
    + select SYS_SUPPORTS_32BIT_KERNEL
    + select SYS_SUPPORTS_64BIT_KERNEL
    + select SYS_SUPPORTS_HIGHMEM
    + select SYS_SUPPORTS_LITTLE_ENDIAN
    + select LOONGSON_MC146818
    + select UEFI_FIRMWARE_INTERFACE
    + help
    + Lemote Loongson 3A family machines utilize the 3A revision of
    + Loongson processor and RS780/SBX00 chipset.
    endchoice

    config CS5536
    @@ -86,8 +113,33 @@ config LOONGSON_UART_BASE
    default y
    depends on EARLY_PRINTK || SERIAL_8250

    +config LOONGSON_BIGMEM
    + bool "Soft IOMMU Support for Big Memory (>4GB)"
    + depends on CPU_LOONGSON3
    + select SWIOTLB
    + select ZONE_DMA32
    +
    +config IOMMU_HELPER
    + bool
    +
    +config NEED_SG_DMA_LENGTH
    + bool
    +
    +config SWIOTLB
    + bool
    + select IOMMU_HELPER
    + select NEED_SG_DMA_LENGTH
    + select NEED_DMA_MAP_STATE
    +
    config LOONGSON_MC146818
    bool
    default n

    +config ARCH_SPARSEMEM_ENABLE
    + bool
    + select SPARSEMEM_STATIC
    +
    +config UEFI_FIRMWARE_INTERFACE
    + bool
    +
    endif # MACH_LOONGSON
    --
    1.7.7.3


    \
     
     \ /
      Last update: 2012-10-05 16:01    [W:4.975 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site