lkml.org 
[lkml]   [2012]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] arm: mvebu: adding SATA support: dt binding and config update
Jason,

On Thu, 25 Oct 2012 09:18:18 -0400, Jason Cooper wrote:

> > Jason, Andrew, do you want I split this patch as suggested by
> > Thomas or are you fine with having one single patch?
>
> Yes, please make the defconfig changes a separate patch. Also, please
> make sure only the minimum is enabled (eq RAID... isn't needed).

I haven't looked in details at the driver, but is nr-ports = <foo> the
right way of doing things? We may have platforms were port 0 is not
used, but port 1 is used, and just a number of ports doesn't allow to
express this.

Shouldn't the DT property be

ports = <0>, <1>
ports = <1>
ports = <1>, <3>

In order to allow to more precisely enabled SATA ports? Or maybe the
SATA ports cannot be enabled/disabled on a per-port basis, in which
case I'm obviously wrong here.

Best regards,

Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com


\
 
 \ /
  Last update: 2012-10-26 15:21    [W:0.076 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site