lkml.org 
[lkml]   [2012]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC] Energy/power monitoring within the kernel
Date
Hi,

On Tuesday, October 23, 2012 06:30:49 PM Pawel Moll wrote:
> Greetings All,
>
> More and more of people are getting interested in the subject of power
> (energy) consumption monitoring. We have some external tools like
> "battery simulators", energy probes etc., but some targets can measure
> their power usage on their own.
>
> Traditionally such data should be exposed to the user via hwmon sysfs
> interface, and that's exactly what I did for "my" platform - I have
> a /sys/class/hwmon/hwmon*/device/energy*_input and this was good
> enough to draw pretty graphs in userspace. Everyone was happy...
>
> Now I am getting new requests to do more with this data. In particular
> I'm asked how to add such information to ftrace/perf output.
Why? What is the gain?

Perf events can be triggered at any point in the kernel.
A cpufreq event is triggered when the frequency gets changed.
CPU idle events are triggered when the kernel requests to enter an idle state
or exits one.

When would you trigger a thermal or a power event?
There is the possibility of (critical) thermal limits.
But if I understand this correctly you want this for debugging and
I guess you have everything interesting one can do with temperature
values:
- read the temperature
- draw some nice graphs from the results

Hm, I guess I know what you want to do:
In your temperature/energy graph, you want to have some dots
when relevant HW states (frequency, sleep states, DDR power,...)
changed. Then you are able to see the effects over a timeline.

So you have to bring the existing frequency/idle perf events together
with temperature readings

Cleanest solution could be to enhance the exisiting userspace apps
(pytimechart/perf timechart) and let them add another line
(temperature/energy), but the data would not come from perf, but
from sysfs/hwmon.
Not sure whether this works out with the timechart tools.
Anyway, this sounds like a userspace only problem.

Thomas


\
 
 \ /
  Last update: 2012-10-24 03:21    [W:0.079 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site