lkml.org 
[lkml]   [2012]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] i2c: i2c-ocores: Add support for sparc, custom set and get functions, and the GRLIB port of the controller
Date
On sparc, irqs are not present as an IORESOURCE in the struct platform_device
representation. Therefore, for sparc the irq needs to be fetched in a different
manner.

The GRLIB port of the ocores i2c controller needs custom getreg and setreg
functions to allow for big endian register access and to deal with the fact that
the PRELOW and PREHIGH registers have been merged into one register.

Signed-off-by: Andreas Larsson <andreas@gaisler.com>

Andreas Larsson (2):
i2c: i2c-ocores: Add irq support for sparc
i2c: i2c-ocores: Add support for the GRLIB port of the controller and
custom getreg and setreg functions

drivers/i2c/busses/i2c-ocores.c | 70 +++++++++++++++++++++++++++++++++++---
1 files changed, 64 insertions(+), 6 deletions(-)



\
 
 \ /
  Last update: 2012-10-23 19:41    [W:0.080 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site