lkml.org 
[lkml]   [2012]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 03/32 v4] MIPS: Loongson 1B: use ehci-platform instead of ehci-ls1x.
Date
Hi Kelvin,

On Tuesday 23 October 2012 16:13:01 Kelvin Cheung wrote:
> Thank Florian.
> It looks great.
> However, you forget to remove corresponding section in
> drivers/usb/host/ehci-hcd.c
> ...
> #ifdef CONFIG_MACH_LOONGSON1
> #include "ehci-ls1x.c"
> #define PLATFORM_DRIVER ehci_ls1x_driver
> #endif

Indeed, my bad I will follow up with some fixes for this patchset anyway.
Thank you!

> ...
>
> 2012/10/8 Florian Fainelli <florian@openwrt.org>
>
> > The Loongson 1B EHCI driver does nothing more than what the EHCI platform
> > driver already does, so use the generic implementation.
> >
> > Signed-off-by: Florian Fainelli <florian@openwrt.org>
> > ---
> > Changes in v4:
> > - rebased against greg's latest usb-next
> >
> > No changes since v1
> >
> > arch/mips/configs/ls1b_defconfig | 1 +
> > arch/mips/loongson1/common/platform.c | 8 +++++++-
> > 2 files changed, 8 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/mips/configs/ls1b_defconfig
> > b/arch/mips/configs/ls1b_defconfig
> > index 80cff8b..7eb7554 100644
> > --- a/arch/mips/configs/ls1b_defconfig
> > +++ b/arch/mips/configs/ls1b_defconfig
> > @@ -76,6 +76,7 @@ CONFIG_HID_GENERIC=m
> > CONFIG_USB=y
> > CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
> > CONFIG_USB_EHCI_HCD=y
> > +CONFIG_USB_EHCI_HCD_PLATFORM=y
> > # CONFIG_USB_EHCI_TT_NEWSCHED is not set
> > CONFIG_USB_STORAGE=m
> > CONFIG_USB_SERIAL=m
> > diff --git a/arch/mips/loongson1/common/platform.c
> > b/arch/mips/loongson1/common/platform.c
> > index e92d59c..2874bf2 100644
> > --- a/arch/mips/loongson1/common/platform.c
> > +++ b/arch/mips/loongson1/common/platform.c
> > @@ -13,6 +13,7 @@
> > #include <linux/phy.h>
> > #include <linux/serial_8250.h>
> > #include <linux/stmmac.h>
> > +#include <linux/usb/ehci_pdriver.h>
> > #include <asm-generic/sizes.h>
> >
> > #include <loongson1.h>
> > @@ -107,13 +108,18 @@ static struct resource ls1x_ehci_resources[] = {
> > },
> > };
> >
> > +static struct usb_ehci_pdata ls1x_ehci_pdata = {
> > + .port_power_off = 1,
> > +};
> > +
> > struct platform_device ls1x_ehci_device = {
> > - .name = "ls1x-ehci",
> > + .name = "ehci-platform",
> > .id = -1,
> > .num_resources = ARRAY_SIZE(ls1x_ehci_resources),
> > .resource = ls1x_ehci_resources,
> > .dev = {
> > .dma_mask = &ls1x_ehci_dmamask,
> > + .platform_data = &ls1x_ehci_pdata,
> > },
> > };
> >
> > --
> > 1.7.9.5
> >
> >
>
>
> --
> Best Regards!
> Kelvin Cheung


\
 
 \ /
  Last update: 2012-10-23 12:01    [W:0.092 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site