lkml.org 
[lkml]   [2012]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/5] x86, MCA: Convert dont_log_ce, banks and tolerant
Apart from a few nits below, patch series:

Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>


Regards,
Naveen

On 10/17/2012 04:43 PM, Borislav Petkov wrote:
> From: Borislav Petkov <borislav.petkov@amd.com>
>
> Move those MCA configuration variables into struct mca_config and adjust
> the places they're used accordingly.
>
> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
> ---
> arch/x86/include/asm/mce.h | 7 +++
> arch/x86/kernel/cpu/mcheck/mce.c | 97 ++++++++++++++++++++++------------------
> 2 files changed, 60 insertions(+), 44 deletions(-)
>
> diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
> index 54d73b1f00a0..e4060de88476 100644
> --- a/arch/x86/include/asm/mce.h
> +++ b/arch/x86/include/asm/mce.h
> @@ -119,6 +119,13 @@ struct mce_log {
> #define K8_MCE_THRESHOLD_BASE (MCE_EXTENDED_BANK + 1)
>
> #ifdef __KERNEL__
> +
> +struct mca_config {
> + bool dont_log_ce;
> + u8 banks;
> + int tolerant;
> +};
> +
> extern void mce_register_decode_chain(struct notifier_block *nb);
> extern void mce_unregister_decode_chain(struct notifier_block *nb);
>
> diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
> index 29e87d3b2843..9673629d14d7 100644
> --- a/arch/x86/kernel/cpu/mcheck/mce.c
> +++ b/arch/x86/kernel/cpu/mcheck/mce.c
> @@ -66,20 +66,10 @@ atomic_t mce_entry;
>
> DEFINE_PER_CPU(unsigned, mce_exception_count);
>
> -/*
> - * Tolerant levels:
> - * 0: always panic on uncorrected errors, log corrected errors
> - * 1: panic or SIGBUS on uncorrected errors, log corrected errors
> - * 2: SIGBUS or log uncorrected errors (if possible), log corrected errors
> - * 3: never panic or SIGBUS, log all errors (for testing only)
> - */
> -static int tolerant __read_mostly = 1;
> -static int banks __read_mostly;
> static int rip_msr __read_mostly;
> static int mce_bootlog __read_mostly = -1;
> static int monarch_timeout __read_mostly = -1;
> static int mce_panic_timeout __read_mostly;
> -static int mce_dont_log_ce __read_mostly;
> int mce_cmci_disabled __read_mostly;
> int mce_ignore_ce __read_mostly;
> int mce_ser __read_mostly;
> @@ -87,6 +77,17 @@ int mce_bios_cmci_threshold __read_mostly;
>
> struct mce_bank *mce_banks __read_mostly;
>
> +struct mca_config mca_cfg __read_mostly = {
> + /*
> + * Tolerant levels:
> + * 0: always panic on uncorrected errors, log corrected errors
> + * 1: panic or SIGBUS on uncorrected errors, log corrected errors
> + * 2: SIGBUS or log uncorrected errors (if possible), log corr. errors
> + * 3: never panic or SIGBUS, log all errors (for testing only)
> + */
> + .tolerant = 1
> +};
> +
> /* User mode helper program triggered by machine check event */
> static unsigned long mce_need_notify;
> static char mce_helper[128];
> @@ -599,7 +600,7 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
>
> mce_gather_info(&m, NULL);
>
> - for (i = 0; i < banks; i++) {
> + for (i = 0; i < mca_cfg.banks; i++) {
> if (!mce_banks[i].ctl || !test_bit(i, *b))
> continue;
>
> @@ -631,7 +632,7 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
> * Don't get the IP here because it's unlikely to
> * have anything to do with the actual error location.
> */
> - if (!(flags & MCP_DONTLOG) && !mce_dont_log_ce)
> + if (!(flags & MCP_DONTLOG) && !mca_cfg.dont_log_ce)
> mce_log(&m);
>
> /*
> @@ -658,14 +659,14 @@ static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp,
> {
> int i, ret = 0;
>
> - for (i = 0; i < banks; i++) {
> + for (i = 0; i < mca_cfg.banks; i++) {
> m->status = mce_rdmsrl(MSR_IA32_MCx_STATUS(i));
> if (m->status & MCI_STATUS_VAL) {
> __set_bit(i, validp);
> if (quirk_no_way_out)
> quirk_no_way_out(i, m, regs);
> }
> - if (mce_severity(m, tolerant, msg) >= MCE_PANIC_SEVERITY)
> + if (mce_severity(m, mca_cfg.tolerant, msg) >= MCE_PANIC_SEVERITY)
> ret = 1;
> }
> return ret;
> @@ -700,7 +701,7 @@ static int mce_timed_out(u64 *t)
> goto out;
> if ((s64)*t < SPINUNIT) {
> /* CHECKME: Make panic default for 1 too? */
> - if (tolerant < 1)
> + if (mca_cfg.tolerant < 1)
> mce_panic("Timeout synchronizing machine check over CPUs",
> NULL, NULL);
> cpu_missing = 1;
> @@ -750,7 +751,8 @@ static void mce_reign(void)
> * Grade the severity of the errors of all the CPUs.
> */
> for_each_possible_cpu(cpu) {
> - int severity = mce_severity(&per_cpu(mces_seen, cpu), tolerant,
> + int severity = mce_severity(&per_cpu(mces_seen, cpu),
> + mca_cfg.tolerant,
> &nmsg);
> if (severity > global_worst) {
> msg = nmsg;
> @@ -764,7 +766,7 @@ static void mce_reign(void)
> * This dumps all the mces in the log buffer and stops the
> * other CPUs.
> */
> - if (m && global_worst >= MCE_PANIC_SEVERITY && tolerant < 3)
> + if (m && global_worst >= MCE_PANIC_SEVERITY && mca_cfg.tolerant < 3)
> mce_panic("Fatal Machine check", m, msg);
>
> /*
> @@ -777,7 +779,7 @@ static void mce_reign(void)
> * No machine check event found. Must be some external
> * source or one CPU is hung. Panic.
> */
> - if (global_worst <= MCE_KEEP_SEVERITY && tolerant < 3)
> + if (global_worst <= MCE_KEEP_SEVERITY && mca_cfg.tolerant < 3)
> mce_panic("Machine check from unknown source", NULL, NULL);
>
> /*
> @@ -946,7 +948,7 @@ static void mce_clear_state(unsigned long *toclear)
> {
> int i;
>
> - for (i = 0; i < banks; i++) {
> + for (i = 0; i < mca_cfg.banks; i++) {
> if (test_bit(i, toclear))
> mce_wrmsrl(MSR_IA32_MCx_STATUS(i), 0);
> }
> @@ -1022,7 +1024,7 @@ void do_machine_check(struct pt_regs *regs, long error_code)
> int order;
> /*
> * If no_way_out gets set, there is no safe way to recover from this
> - * MCE. If tolerant is cranked up, we'll try anyway.
> + * MCE. If mca_cfg.tolerant is cranked up, we'll try anyway.
> */
> int no_way_out = 0;
> /*
> @@ -1038,7 +1040,7 @@ void do_machine_check(struct pt_regs *regs, long error_code)
>
> this_cpu_inc(mce_exception_count);
>
> - if (!banks)
> + if (!mca_cfg.banks)
> goto out;
>
> mce_gather_info(&m, regs);
> @@ -1065,7 +1067,7 @@ void do_machine_check(struct pt_regs *regs, long error_code)
> * because the first one to see it will clear it.
> */
> order = mce_start(&no_way_out);
> - for (i = 0; i < banks; i++) {
> + for (i = 0; i < mca_cfg.banks; i++) {
> __clear_bit(i, toclear);
> if (!test_bit(i, valid_banks))
> continue;
> @@ -1093,7 +1095,7 @@ void do_machine_check(struct pt_regs *regs, long error_code)
> */
> add_taint(TAINT_MACHINE_CHECK);
>
> - severity = mce_severity(&m, tolerant, NULL);
> + severity = mce_severity(&m, mca_cfg.tolerant, NULL);
>
> /*
> * When machine check was for corrected handler don't touch,
> @@ -1117,7 +1119,7 @@ void do_machine_check(struct pt_regs *regs, long error_code)
> * When the ring overflows we just ignore the AO error.
> * RED-PEN add some logging mechanism when
> * usable_address or mce_add_ring fails.
> - * RED-PEN don't ignore overflow for tolerant == 0
> + * RED-PEN don't ignore overflow for mca_cfg.tolerant == 0
> */
> if (severity == MCE_AO_SEVERITY && mce_usable_address(&m))
> mce_ring_add(m.addr >> PAGE_SHIFT);
> @@ -1149,7 +1151,7 @@ void do_machine_check(struct pt_regs *regs, long error_code)
> * issues we try to recover, or limit damage to the current
> * process.
> */
> - if (tolerant < 3) {
> + if (mca_cfg.tolerant < 3) {
> if (no_way_out)
> mce_panic("Fatal machine check on current CPU", &m, msg);
> if (worst == MCE_AR_SEVERITY) {
> @@ -1377,11 +1379,13 @@ EXPORT_SYMBOL_GPL(mce_notify_irq);
> static int __cpuinit __mcheck_cpu_mce_banks_init(void)
> {
> int i;
> + u8 num_banks = mca_cfg.banks;

Nit: no need for the above? Only 2 references below and I think we can
simply continue to use mca_cfg for uniformity. Ditto for the use of cfg
further below.

>
> - mce_banks = kzalloc(banks * sizeof(struct mce_bank), GFP_KERNEL);
> + mce_banks = kzalloc(num_banks * sizeof(struct mce_bank), GFP_KERNEL);
> if (!mce_banks)
> return -ENOMEM;
> - for (i = 0; i < banks; i++) {
> +
> + for (i = 0; i < num_banks; i++) {
> struct mce_bank *b = &mce_banks[i];
>
> b->ctl = -1ULL;
> @@ -1401,7 +1405,7 @@ static int __cpuinit __mcheck_cpu_cap_init(void)
> rdmsrl(MSR_IA32_MCG_CAP, cap);
>
> b = cap & MCG_BANKCNT_MASK;
> - if (!banks)
> + if (!mca_cfg.banks)
> pr_info("CPU supports %d MCE banks\n", b);
>
> if (b > MAX_NR_BANKS) {
> @@ -1411,8 +1415,9 @@ static int __cpuinit __mcheck_cpu_cap_init(void)
> }
>
> /* Don't support asymmetric configurations today */
> - WARN_ON(banks != 0 && b != banks);
> - banks = b;
> + WARN_ON(mca_cfg.banks != 0 && b != mca_cfg.banks);
> + mca_cfg.banks = b;
> +
> if (!mce_banks) {
> int err = __mcheck_cpu_mce_banks_init();
>
> @@ -1448,7 +1453,7 @@ static void __mcheck_cpu_init_generic(void)
> if (cap & MCG_CTL_P)
> wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
>
> - for (i = 0; i < banks; i++) {
> + for (i = 0; i < mca_cfg.banks; i++) {
> struct mce_bank *b = &mce_banks[i];
>
> if (!b->init)
> @@ -1489,6 +1494,8 @@ static void quirk_sandybridge_ifu(int bank, struct mce *m, struct pt_regs *regs)
> /* Add per CPU specific workarounds here */
> static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
> {
> + struct mca_config *cfg = &mca_cfg;
> +

Same as above. We could probably continue using mca_cfg for uniformity.

> if (c->x86_vendor == X86_VENDOR_UNKNOWN) {
> pr_info("unknown CPU type - not enabling MCE support\n");
> return -EOPNOTSUPP;
> @@ -1496,7 +1503,7 @@ static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
>
> /* This should be disabled by the BIOS, but isn't always */
> if (c->x86_vendor == X86_VENDOR_AMD) {
> - if (c->x86 == 15 && banks > 4) {
> + if (c->x86 == 15 && cfg->banks > 4) {
> /*
> * disable GART TBL walk error reporting, which
> * trips off incorrectly with the IOMMU & 3ware
> @@ -1515,7 +1522,7 @@ static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
> * Various K7s with broken bank 0 around. Always disable
> * by default.
> */
> - if (c->x86 == 6 && banks > 0)
> + if (c->x86 == 6 && cfg->banks > 0)
> mce_banks[0].ctl = 0;
>
> /*
> @@ -1566,7 +1573,7 @@ static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
> * valid event later, merely don't write CTL0.
> */
>
> - if (c->x86 == 6 && c->x86_model < 0x1A && banks > 0)
> + if (c->x86 == 6 && c->x86_model < 0x1A && cfg->banks > 0)
> mce_banks[0].init = 0;
>
> /*
> @@ -1951,6 +1958,8 @@ static struct miscdevice mce_chrdev_device = {
> */
> static int __init mcheck_enable(char *str)
> {
> + struct mca_config *cfg = &mca_cfg;
> +

Same as above.

> if (*str == 0) {
> enable_p5_mce();
> return 1;
> @@ -1962,7 +1971,7 @@ static int __init mcheck_enable(char *str)
> else if (!strcmp(str, "no_cmci"))
> mce_cmci_disabled = 1;
> else if (!strcmp(str, "dont_log_ce"))
> - mce_dont_log_ce = 1;
> + cfg->dont_log_ce = true;
> else if (!strcmp(str, "ignore_ce"))
> mce_ignore_ce = 1;
> else if (!strcmp(str, "bootlog") || !strcmp(str, "nobootlog"))
> @@ -1970,7 +1979,7 @@ static int __init mcheck_enable(char *str)
> else if (!strcmp(str, "bios_cmci_threshold"))
> mce_bios_cmci_threshold = 1;
> else if (isdigit(str[0])) {
> - get_option(&str, &tolerant);
> + get_option(&str, &(cfg->tolerant));
> if (*str == ',') {
> ++str;
> get_option(&str, &monarch_timeout);
> @@ -2002,7 +2011,7 @@ static int mce_disable_error_reporting(void)
> {
> int i;
>
> - for (i = 0; i < banks; i++) {
> + for (i = 0; i < mca_cfg.banks; i++) {
> struct mce_bank *b = &mce_banks[i];
>
> if (b->init)
> @@ -2190,9 +2199,9 @@ static ssize_t store_int_with_restart(struct device *s,
> }
>
> static DEVICE_ATTR(trigger, 0644, show_trigger, set_trigger);
> -static DEVICE_INT_ATTR(tolerant, 0644, tolerant);
> +static DEVICE_INT_ATTR(tolerant, 0644, mca_cfg.tolerant);
> static DEVICE_INT_ATTR(monarch_timeout, 0644, monarch_timeout);
> -static DEVICE_INT_ATTR(dont_log_ce, 0644, mce_dont_log_ce);
> +static DEVICE_BOOL_ATTR(dont_log_ce, 0644, mca_cfg.dont_log_ce);
>
> static struct dev_ext_attribute dev_attr_check_interval = {
> __ATTR(check_interval, 0644, device_show_int, store_int_with_restart),
> @@ -2259,7 +2268,7 @@ static __cpuinit int mce_device_create(unsigned int cpu)
> if (err)
> goto error;
> }
> - for (j = 0; j < banks; j++) {
> + for (j = 0; j < mca_cfg.banks; j++) {
> err = device_create_file(dev, &mce_banks[j].attr);
> if (err)
> goto error2;
> @@ -2291,7 +2300,7 @@ static __cpuinit void mce_device_remove(unsigned int cpu)
> for (i = 0; mce_device_attrs[i]; i++)
> device_remove_file(dev, mce_device_attrs[i]);
>
> - for (i = 0; i < banks; i++)
> + for (i = 0; i < mca_cfg.banks; i++)
> device_remove_file(dev, &mce_banks[i].attr);
>
> device_unregister(dev);
> @@ -2310,7 +2319,7 @@ static void __cpuinit mce_disable_cpu(void *h)
>
> if (!(action & CPU_TASKS_FROZEN))
> cmci_clear();
> - for (i = 0; i < banks; i++) {
> + for (i = 0; i < mca_cfg.banks; i++) {
> struct mce_bank *b = &mce_banks[i];
>
> if (b->init)
> @@ -2328,7 +2337,7 @@ static void __cpuinit mce_reenable_cpu(void *h)
>
> if (!(action & CPU_TASKS_FROZEN))
> cmci_reenable();
> - for (i = 0; i < banks; i++) {
> + for (i = 0; i < mca_cfg.banks; i++) {
> struct mce_bank *b = &mce_banks[i];
>
> if (b->init)
> @@ -2381,7 +2390,7 @@ static __init void mce_init_banks(void)
> {
> int i;
>
> - for (i = 0; i < banks; i++) {
> + for (i = 0; i < mca_cfg.banks; i++) {
> struct mce_bank *b = &mce_banks[i];
> struct device_attribute *a = &b->attr;
>



\
 
 \ /
  Last update: 2012-10-17 14:41    [W:0.213 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site