lkml.org 
[lkml]   [2012]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: REGRESSION: usbdevfs: Use-scatter-gather-lists-for-large-bulk-transfers
From
On Thu, Oct 11, 2012 at 2:50 PM, Peter Stuge <peter@stuge.se> wrote:
> But it isn't certain that is is involved at all. If your impact
> version uses libusb.so like in ISE 11.1 then it will not be. One way
> to test is by trying to generate a libusb debug log. See
> https://libusb.org/wiki/debug for instructions which are for libusb,
> but which work also for libusbx since the code is nearly the same.
> (Just replace the repository to clone from.)

Actually this is not that correct. For libusbx, you do not need
to rebuild libusbx to get the debug log at all, just need to
set environment variable LIBUSB_DEBUG=4 to get the
debug log.

Also it seems to me Xilinx is using libusb-1.0 API now.
http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/pim_t_linux_cable_drivers.htm



--
Xiaofan


\
 
 \ /
  Last update: 2012-10-11 09:01    [W:0.047 / U:0.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site