lkml.org 
[lkml]   [2012]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] pinctrl/nomadik: always use the simple irqdomain
> From: Linus Walleij <linus.walleij@linaro.org>
>
> Since the simple irqdomain will fall back to a linear domain
> if the first_irq provided is <= 0, just use this, just make
> sure the first_irq is negative in the device tree case.
>
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> drivers/pinctrl/pinctrl-nomadik.c | 13 +++----------
> 1 file changed, 3 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
> index 992982c..a4a4247 100644
> --- a/drivers/pinctrl/pinctrl-nomadik.c
> +++ b/drivers/pinctrl/pinctrl-nomadik.c
> @@ -1277,6 +1277,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
> struct clk *clk;
> int secondary_irq;
> void __iomem *base;
> + int irq_start = -1;
> int irq;
> int ret;
>
> @@ -1380,19 +1381,11 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
>
> platform_set_drvdata(dev, nmk_chip);
>
> - if (np) {
> - /* The DT case will just grab a set of IRQ numbers */
> - nmk_chip->domain = irq_domain_add_linear(np, NMK_GPIO_PER_CHIP,
> - &nmk_gpio_irq_simple_ops, nmk_chip);
> - } else {
> - /* Non-DT legacy mode, use hardwired IRQ numbers */
> - int irq_start;
> -
> + if (!np)
> irq_start = NOMADIK_GPIO_TO_IRQ(pdata->first_gpio);
> - nmk_chip->domain = irq_domain_add_simple(NULL,
> + nmk_chip->domain = irq_domain_add_simple(NULL,
> NMK_GPIO_PER_CHIP, irq_start,
> &nmk_gpio_irq_simple_ops, nmk_chip);
> - }
> if (!nmk_chip->domain) {
> dev_err(&dev->dev, "failed to create irqdomain\n");
> ret = -ENOSYS;

Looks good:

Acked-by: Lee Jones <lee.jones@linaro.org>

--
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2012-10-11 17:41    [W:0.025 / U:2.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site