lkml.org 
[lkml]   [2012]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 03/11] Staging: comedi: fix line over 80 character issue in cb_pcimdas.c
Date
This is a patch to the cb_pcimdas.c file that fixes up a line
over 80 character warning found by the checkpatch.pl tool.

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@greenturtles.in>
---
drivers/staging/comedi/drivers/cb_pcimdas.c | 29 +++++++++++++++++++-------
1 files changed, 21 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c
index 8ba6942..26b082b 100644
--- a/drivers/staging/comedi/drivers/cb_pcimdas.c
+++ b/drivers/staging/comedi/drivers/cb_pcimdas.c
@@ -96,7 +96,10 @@ struct cb_pcimdas_board {
int ao_nchan; /* number of analog out channels */
int ao_bits; /* analogue output resolution */
int has_ao_fifo; /* analog output has fifo */
- int ao_scan_speed; /* analog output speed for 1602 series (for a scan, not conversion) */
+ int ao_scan_speed; /*
+ * analog output speed for 1602 series
+ * (for a scan, not conversion)
+ */
int fifo_size; /* number of samples fifo can hold */
int dio_bits; /* number of dio bits */
int has_dio; /* has DIO */
@@ -139,9 +142,12 @@ MODULE_DEVICE_TABLE(pci, cb_pcimdas_pci_table);
*/
#define thisboard ((const struct cb_pcimdas_board *)dev->board_ptr)

-/* this structure is for data unique to this hardware driver. If
- several hardware drivers keep similar information in this structure,
- feel free to suggest moving the variable to the struct comedi_device struct. */
+/*
+ * this structure is for data unique to this hardware driver. If
+ * several hardware drivers keep similar information in this structure,
+ * feel free to suggest moving the variable to the struct comedi_device
+ * struct.
+ */
struct cb_pcimdas_private {
int data;

@@ -317,7 +323,8 @@ found:
s->subdev_flags = SDF_WRITABLE;
s->n_chan = thisboard->ao_nchan;
s->maxdata = 1 << thisboard->ao_bits;
- s->range_table = &range_unknown; /* ranges are hardware settable, but not software readable. */
+ /* ranges are hardware settable, but not software readable. */
+ s->range_table = &range_unknown;
s->insn_write = &cb_pcimdas_ao_winsn;
s->insn_read = &cb_pcimdas_ao_rinsn;

@@ -400,9 +407,15 @@ static int cb_pcimdas_ai_rinsn(struct comedi_device *dev,
outb(d, devpriv->BADR3 + 5);
}
outb(0x01, devpriv->BADR3 + 6); /* set bursting off, conversions on */
- outb(0x00, devpriv->BADR3 + 7); /* set range to 10V. UP/BP is controlled by a switch on the board */
-
- /* write channel limits to multiplexer, set Low (bits 0-3) and High (bits 4-7) channels to chan. */
+ outb(0x00, devpriv->BADR3 + 7); /*
+ * set range to 10V. UP/BP is
+ * controlled by a switch on the board
+ */
+
+ /*
+ * write channel limits to multiplexer, set Low (bits 0-3)
+ * and High (bits 4-7) channels to chan.
+ */
chanlims = chan | (chan << 4);
outb(chanlims, devpriv->BADR3 + 0);

--
1.7.0.4


\
 
 \ /
  Last update: 2012-01-04 13:43    [W:0.259 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site