lkml.org 
[lkml]   [2011]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 0000/0046] Staging: hv: Driver cleanup
Date


> -----Original Message-----
> From: Greg KH [mailto:greg@kroah.com]
> Sent: Tuesday, August 30, 2011 1:44 PM
> To: KY Srinivasan
> Cc: Olaf Hering; devel@linuxdriverproject.org; gregkh@suse.de; linux-
> kernel@vger.kernel.org; virtualization@lists.osdl.org
> Subject: Re: [PATCH 0000/0046] Staging: hv: Driver cleanup
>
> On Tue, Aug 30, 2011 at 05:22:54PM +0000, KY Srinivasan wrote:
> >
> >
> > > -----Original Message-----
> > > From: Olaf Hering [mailto:olaf@aepfle.de]
> > > Sent: Tuesday, August 30, 2011 8:49 AM
> > > To: KY Srinivasan
> > > Cc: gregkh@suse.de; linux-kernel@vger.kernel.org;
> > > devel@linuxdriverproject.org; virtualization@lists.osdl.org
> > > Subject: Re: [PATCH 0000/0046] Staging: hv: Driver cleanup
> > >
> > > On Sat, Aug 27, K. Y. Srinivasan wrote:
> > >
> > > > 2) Handle all block devices using the storvsc driver. I have modified
> > > > the implementation here based on Christoph's feedback on my earlier
> > > > implementation.
> > >
> > > The upgrade path from hv_blkvsc to hv_storvsc is difficult.
> > >
> > > hv_storvsc does not provide the vmbus:hv_block modalias, so mkinitrd
> > > does not know what module to choose when mkinitrd is called in a
> > > previous kernel (like sles11sp1).
> > >
> > >
> > > In a guest with both SCSI and IDE controllers the IDE disks are
> > > discovered first, so the SCSI drives will also change their names.
> > > Thats not a problem for data partitions because they could be mounted by
> > > UUID or LABEL in fstab.
> > > But its difficult to adjust /boot/grub/device.map for example because
> > > the old IDE drives do not provide an identifier. What is the best way
> > > to make sure the rename from hd* to sd* in such config files is done
> > > correctly? Is it safe to assume that all drives with a class_id of
> > > 32412632-86cb-44a2-9b5c50d1417354f5 are connected to IDE ports?
> >
> > The class_id is invariant as we are returning the guid of the device under
> class_id.
> >
> > So, if you see a IDE guid under class_id, you can be sure (a) it is an ide device
> and (b)
> > it is a device managed via the PV drivers.
> >
> > >
> > > localhost:~ # head /sys/bus/vmbus/devices/vmbus_0_{1,2,3,10,11}/class_id
> > > ==> /sys/bus/vmbus/devices/vmbus_0_1/class_id <==
> > > {32412632-86cb-44a2-9b5c50d1417354f5}
> > >
> > > ==> /sys/bus/vmbus/devices/vmbus_0_2/class_id <==
> > > {32412632-86cb-44a2-9b5c50d1417354f5}
> > >
> > > ==> /sys/bus/vmbus/devices/vmbus_0_3/class_id <==
> > > {32412632-86cb-44a2-9b5c50d1417354f5}
> > >
> > > ==> /sys/bus/vmbus/devices/vmbus_0_10/class_id <==
> > > {ba6163d9-04a1-4d29-b60572e2ffb1dc7f}
> > >
> > > ==> /sys/bus/vmbus/devices/vmbus_0_11/class_id <==
> > > {ba6163d9-04a1-4d29-b60572e2ffb1dc7f}
> > >
> > >
> > > In my test system, the IDE drives are now discovered twice, once by
> > > hv_storvsc and once by libata:
> >
> > This is a known (old problem). The way this was handled earlier was to have the
> > modprobe rules in place to setup a dependency that would force the load of
> the
> > hyper-v driver (blk / stor) ahead of the native driver and if the load of the PV
> > driver succeeded, we would not load the native driver. In sles11 sp1, we had a
> rule for
> > loading blkvsc. With the merge of blkvsc and storvsc, the only change we need
> to make
> > is to have storvsc in the rule (instaed of blkvsc).
>
> Why do we need a rule at all? Shouldn't the module dependancy stuff
> handle the autoloading of the drivers properly from the initrd now that
> the hotplug logic is hooked up properly?
>
> What am I missing here?

On sles11 the PV drivers are used to manage the root device. Autoloading is not
the issue here; to manage the root device, we want to load the Hyper-V disk driver
before the native Linux disk driver for the emulated IDE device.

>
> Or is the hotplug code not working correctly?

Hotplug code is working as expected; the issue is taking control of the root device and
preventing the same device being presented once through native drivers and once through
Hyper-V drivers.

Regards,

K. Y
>
> greg k-h



\
 
 \ /
  Last update: 2011-08-31 16:21    [W:0.116 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site