lkml.org 
[lkml]   [2011]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 05/14] [media] bt8xx: Use current logging styles
    Date
    This converts some messages that were emitted at
    KERN_INFO to KERN_DEBUG. All of these messages
    were guarded by bttv_debug tests.

    Add pr_fmt.
    Convert printks to pr_<level>
    Convert printks without KERN_<level> to appropriate pr_<level>.
    Removed embedded prefixes when pr_fmt was added.
    Whitespace cleanups when around other conversions.
    Macros coded with if statements should be do { if... } while (0)
    so the macros can be used in other if tests.
    Use ##__VA_ARGS__ for variadic macro as well.
    Coalesce format strings.

    Signed-off-by: Joe Perches <joe@perches.com>
    ---
    drivers/media/video/bt8xx/bttv-cards.c | 242 ++++++++++++-------------
    drivers/media/video/bt8xx/bttv-driver.c | 294 ++++++++++++++++---------------
    drivers/media/video/bt8xx/bttv-gpio.c | 4 +-
    drivers/media/video/bt8xx/bttv-i2c.c | 56 ++++---
    drivers/media/video/bt8xx/bttv-input.c | 37 ++--
    drivers/media/video/bt8xx/bttv-risc.c | 25 ++--
    drivers/media/video/bt8xx/bttv-vbi.c | 9 +-
    drivers/media/video/bt8xx/bttvp.h | 18 ++-
    8 files changed, 355 insertions(+), 330 deletions(-)

    diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
    index 5b15f63..5939021 100644
    --- a/drivers/media/video/bt8xx/bttv-cards.c
    +++ b/drivers/media/video/bt8xx/bttv-cards.c
    @@ -25,6 +25,8 @@

    */

    +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
    +
    #include <linux/delay.h>
    #include <linux/module.h>
    #include <linux/kmod.h>
    @@ -2905,19 +2907,17 @@ void __devinit bttv_idcard(struct bttv *btv)

    if (type != -1) {
    /* found it */
    - printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
    - "PCI subsystem ID is %04x:%04x\n",
    - btv->c.nr,cards[type].name,cards[type].cardnr,
    - btv->cardid & 0xffff,
    - (btv->cardid >> 16) & 0xffff);
    + pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n",
    + btv->c.nr, cards[type].name, cards[type].cardnr,
    + btv->cardid & 0xffff,
    + (btv->cardid >> 16) & 0xffff);
    btv->c.type = cards[type].cardnr;
    } else {
    /* 404 */
    - printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
    - btv->c.nr, btv->cardid & 0xffff,
    - (btv->cardid >> 16) & 0xffff);
    - printk(KERN_DEBUG "please mail id, board name and "
    - "the correct card= insmod option to linux-media@vger.kernel.org\n");
    + pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n",
    + btv->c.nr, btv->cardid & 0xffff,
    + (btv->cardid >> 16) & 0xffff);
    + pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n");
    }
    }

    @@ -2926,10 +2926,10 @@ void __devinit bttv_idcard(struct bttv *btv)
    btv->c.type=card[btv->c.nr];

    /* print which card config we are using */
    - printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
    - bttv_tvcards[btv->c.type].name, btv->c.type,
    - card[btv->c.nr] < bttv_num_tvcards
    - ? "insmod option" : "autodetected");
    + pr_info("%d: using: %s [card=%d,%s]\n",
    + btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type,
    + card[btv->c.nr] < bttv_num_tvcards
    + ? "insmod option" : "autodetected");

    /* overwrite gpio stuff ?? */
    if (UNSET == audioall && UNSET == audiomux[0])
    @@ -2948,12 +2948,13 @@ void __devinit bttv_idcard(struct bttv *btv)
    }
    }
    bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
    - printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
    - btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
    + pr_info("%d: gpio config override: mask=0x%x, mux=",
    + btv->c.nr, bttv_tvcards[btv->c.type].gpiomask);
    for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
    - printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
    + pr_cont("%s0x%x",
    + i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
    }
    - printk("\n");
    + pr_cont("\n");
    }

    /*
    @@ -2974,8 +2975,8 @@ static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])

    if (-1 != type) {
    btv->c.type = type;
    - printk("bttv%d: detected by eeprom: %s [card=%d]\n",
    - btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
    + pr_info("%d: detected by eeprom: %s [card=%d]\n",
    + btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
    }
    }

    @@ -3019,7 +3020,7 @@ static void flyvideo_gpio(struct bttv *btv)
    tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
    break;
    default:
    - printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
    + pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr);
    break;
    }

    @@ -3036,13 +3037,13 @@ static void flyvideo_gpio(struct bttv *btv)
    if (is_capture_only)
    tuner_type = TUNER_ABSENT; /* No tuner present */

    - printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
    - btv->c.nr, has_radio ? "yes" : "no ",
    - has_remote ? "yes" : "no ", tuner_type, gpio);
    - printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
    - btv->c.nr, is_lr90 ? "yes" : "no ",
    - has_tda9820_tda9821 ? "yes" : "no ",
    - is_capture_only ? "yes" : "no ");
    + pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
    + btv->c.nr, has_radio ? "yes" : "no",
    + has_remote ? "yes" : "no", tuner_type, gpio);
    + pr_info("%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
    + btv->c.nr, is_lr90 ? "yes" : "no",
    + has_tda9820_tda9821 ? "yes" : "no",
    + is_capture_only ? "yes" : "no");

    if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
    btv->tuner_type = tuner_type;
    @@ -3091,12 +3092,11 @@ static void miro_pinnacle_gpio(struct bttv *btv)
    if (btv->c.type == BTTV_BOARD_PINNACLE)
    btv->c.type = BTTV_BOARD_PINNACLEPRO;
    }
    - printk(KERN_INFO
    - "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
    - btv->c.nr, id+1, btv->tuner_type,
    - !btv->has_radio ? "no" :
    - (btv->has_matchbox ? "matchbox" : "fmtuner"),
    - (-1 == msp) ? "no" : "yes");
    + pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
    + btv->c.nr, id+1, btv->tuner_type,
    + !btv->has_radio ? "no" :
    + (btv->has_matchbox ? "matchbox" : "fmtuner"),
    + (-1 == msp) ? "no" : "yes");
    } else {
    /* new cards with microtune tuner */
    id = 63 - id;
    @@ -3138,9 +3138,8 @@ static void miro_pinnacle_gpio(struct bttv *btv)
    }
    if (-1 != msp)
    btv->c.type = BTTV_BOARD_PINNACLEPRO;
    - printk(KERN_INFO
    - "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
    - btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
    + pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
    + btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
    btv->tuner_type = TUNER_MT2032;
    }
    }
    @@ -3202,7 +3201,7 @@ static void gvc1100_muxsel(struct bttv *btv, unsigned int input)

    static void init_lmlbt4x(struct bttv *btv)
    {
    - printk(KERN_DEBUG "LMLBT4x init\n");
    + pr_debug("LMLBT4x init\n");
    btwrite(0x000000, BT848_GPIO_REG_INP);
    gpio_inout(0xffffff, 0x0006C0);
    gpio_write(0x000000);
    @@ -3246,7 +3245,7 @@ static void bttv_reset_audio(struct bttv *btv)
    return;

    if (bttv_debug)
    - printk("bttv%d: BT878A ARESET\n",btv->c.nr);
    + pr_debug("%d: BT878A ARESET\n", btv->c.nr);
    btwrite((1<<7), 0x058);
    udelay(10);
    btwrite( 0, 0x058);
    @@ -3349,7 +3348,8 @@ void __devinit bttv_init_card2(struct bttv *btv)
    case BTTV_BOARD_MAGICTVIEW061:
    if (btv->cardid == 0x3002144f) {
    btv->has_radio=1;
    - printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
    + pr_info("%d: radio detected by subsystem id (CPH05x)\n",
    + btv->c.nr);
    }
    break;
    case BTTV_BOARD_STB2:
    @@ -3438,17 +3438,16 @@ void __devinit bttv_init_card2(struct bttv *btv)
    btv->tuner_type = tuner[btv->c.nr];

    if (btv->tuner_type == TUNER_ABSENT)
    - printk(KERN_INFO "bttv%d: tuner absent\n", btv->c.nr);
    - else if(btv->tuner_type == UNSET)
    - printk(KERN_WARNING "bttv%d: tuner type unset\n", btv->c.nr);
    + pr_info("%d: tuner absent\n", btv->c.nr);
    + else if (btv->tuner_type == UNSET)
    + pr_warn("%d: tuner type unset\n", btv->c.nr);
    else
    - printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
    - btv->tuner_type);
    + pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type);

    if (autoload != UNSET) {
    - printk(KERN_WARNING "bttv%d: the autoload option is obsolete.\n", btv->c.nr);
    - printk(KERN_WARNING "bttv%d: use option msp3400, tda7432 or tvaudio to\n", btv->c.nr);
    - printk(KERN_WARNING "bttv%d: override which audio module should be used.\n", btv->c.nr);
    + pr_warn("%d: the autoload option is obsolete\n", btv->c.nr);
    + pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n",
    + btv->c.nr);
    }

    if (UNSET == btv->tuner_type)
    @@ -3541,8 +3540,7 @@ void __devinit bttv_init_card2(struct bttv *btv)
    }

    default:
    - printk(KERN_WARNING "bttv%d: unknown audiodev value!\n",
    - btv->c.nr);
    + pr_warn("%d: unknown audiodev value!\n", btv->c.nr);
    return;
    }

    @@ -3585,8 +3583,7 @@ void __devinit bttv_init_card2(struct bttv *btv)
    return;

    no_audio:
    - printk(KERN_WARNING "bttv%d: audio absent, no audio device found!\n",
    - btv->c.nr);
    + pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr);
    }


    @@ -3639,19 +3636,19 @@ static void modtec_eeprom(struct bttv *btv)
    {
    if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
    btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
    - printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
    - btv->c.nr,&eeprom_data[0x1e]);
    + pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
    + btv->c.nr, &eeprom_data[0x1e]);
    } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
    btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
    - printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
    - btv->c.nr,&eeprom_data[0x1e]);
    + pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
    + btv->c.nr, &eeprom_data[0x1e]);
    } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
    btv->tuner_type=TUNER_PHILIPS_NTSC;
    - printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
    - btv->c.nr,&eeprom_data[0x1e]);
    + pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
    + btv->c.nr, &eeprom_data[0x1e]);
    } else {
    - printk("bttv%d: Modtec: Unknown TunerString: %s\n",
    - btv->c.nr,&eeprom_data[0x1e]);
    + pr_info("%d: Modtec: Unknown TunerString: %s\n",
    + btv->c.nr, &eeprom_data[0x1e]);
    }
    }

    @@ -3663,7 +3660,7 @@ static void __devinit hauppauge_eeprom(struct bttv *btv)
    btv->tuner_type = tv.tuner_type;
    btv->has_radio = tv.has_radio;

    - printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
    + pr_info("%d: Hauppauge eeprom indicates model#%d\n",
    btv->c.nr, tv.model);

    /*
    @@ -3671,7 +3668,7 @@ static void __devinit hauppauge_eeprom(struct bttv *btv)
    * type based on model #.
    */
    if(tv.model == 64900) {
    - printk("bttv%d: Switching board type from %s to %s\n",
    + pr_info("%d: Switching board type from %s to %s\n",
    btv->c.nr,
    bttv_tvcards[btv->c.type].name,
    bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
    @@ -3698,8 +3695,7 @@ static int terratec_active_radio_upgrade(struct bttv *btv)
    freq=88000/62.5;
    tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
    if (0x1ed8 == tea5757_read(btv)) {
    - printk("bttv%d: Terratec Active Radio Upgrade found.\n",
    - btv->c.nr);
    + pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr);
    btv->has_radio = 1;
    btv->has_saa6588 = 1;
    btv->has_matchbox = 1;
    @@ -3771,13 +3767,12 @@ static int __devinit pvr_boot(struct bttv *btv)

    rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
    if (rc != 0) {
    - printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
    - btv->c.nr);
    + pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr);
    return rc;
    }
    rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
    - printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
    - btv->c.nr, (rc < 0) ? "failed" : "ok");
    + pr_info("%d: altera firmware upload %s\n",
    + btv->c.nr, (rc < 0) ? "failed" : "ok");
    release_firmware(fw_entry);
    return rc;
    }
    @@ -3873,29 +3868,27 @@ static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
    break;
    default:
    /* unknown...leave generic, but get serial # */
    - printk(KERN_INFO "bttv%d: "
    - "osprey eeprom: unknown card type 0x%04x\n",
    - btv->c.nr, type);
    + pr_info("%d: osprey eeprom: unknown card type 0x%04x\n",
    + btv->c.nr, type);
    break;
    }
    serial = get_unaligned_be32((__be32 *)(ee+6));
    }

    - printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
    - btv->c.nr, cardid,
    - cardid>0 ? bttv_tvcards[cardid].name : "Unknown", serial);
    + pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n",
    + btv->c.nr, cardid,
    + cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial);

    if (cardid<0 || btv->c.type == cardid)
    return;

    /* card type isn't set correctly */
    if (card[btv->c.nr] < bttv_num_tvcards) {
    - printk(KERN_WARNING "bttv%d: osprey eeprom: "
    - "Not overriding user specified card type\n", btv->c.nr);
    + pr_warn("%d: osprey eeprom: Not overriding user specified card type\n",
    + btv->c.nr);
    } else {
    - printk(KERN_INFO "bttv%d: osprey eeprom: "
    - "Changing card type from %d to %d\n", btv->c.nr,
    - btv->c.type, cardid);
    + pr_info("%d: osprey eeprom: Changing card type from %d to %d\n",
    + btv->c.nr, btv->c.type, cardid);
    btv->c.type = cardid;
    }
    }
    @@ -3938,14 +3931,14 @@ static void __devinit avermedia_eeprom(struct bttv *btv)
    if (tuner_format == 0x09)
    tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */

    - printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
    + pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=",
    btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
    if (tuner_type) {
    btv->tuner_type = tuner_type;
    - printk(KERN_CONT "%d", tuner_type);
    + pr_cont("%d", tuner_type);
    } else
    - printk(KERN_CONT "Unknown type");
    - printk(KERN_CONT " radio:%s remote control:%s\n",
    + pr_cont("Unknown type");
    + pr_cont(" radio:%s remote control:%s\n",
    tuner_tv_fm ? "yes" : "no",
    btv->has_remote ? "yes" : "no");
    }
    @@ -3993,8 +3986,8 @@ static void __devinit boot_msp34xx(struct bttv *btv, int pin)
    if (bttv_gpio)
    bttv_gpio_tracking(btv,"msp34xx");
    if (bttv_verbose)
    - printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
    - "init [%d]\n", btv->c.nr, pin);
    + pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n",
    + btv->c.nr, pin);
    }

    /* ----------------------------------------------------------------------- */
    @@ -4034,7 +4027,7 @@ static void __devinit init_PXC200(struct bttv *btv)
    btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);

    /* Initialise MAX517 DAC */
    - printk(KERN_INFO "Setting DAC reference voltage level ...\n");
    + pr_info("Setting DAC reference voltage level ...\n");
    bttv_I2CWrite(btv,0x5E,0,0x80,1);

    /* Initialise 12C508 PIC */
    @@ -4043,7 +4036,7 @@ static void __devinit init_PXC200(struct bttv *btv)
    * argument so the numbers are different */


    - printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
    + pr_info("Initialising 12C508 PIC chip ...\n");

    /* First of all, enable the clock line. This is used in the PXC200-F */
    val = btread(BT848_GPIO_DMA_CTL);
    @@ -4062,13 +4055,12 @@ static void __devinit init_PXC200(struct bttv *btv)
    for (i = 0; i < ARRAY_SIZE(vals); i++) {
    tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
    if (tmp != -1) {
    - printk(KERN_INFO
    - "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
    + pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
    vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
    }
    }

    - printk(KERN_INFO "PXC200 Initialised.\n");
    + pr_info("PXC200 Initialised\n");
    }


    @@ -4107,8 +4099,7 @@ init_RTV24 (struct bttv *btv)
    uint32_t dataRead = 0;
    long watchdog_value = 0x0E;

    - printk (KERN_INFO
    - "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
    + pr_info("%d: Adlink RTV-24 initialisation in progress ...\n",
    btv->c.nr);

    btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
    @@ -4122,8 +4113,7 @@ init_RTV24 (struct bttv *btv)
    dataRead = btread (BT848_GPIO_DATA);

    if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
    - printk (KERN_INFO
    - "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
    + pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
    btv->c.nr, dataRead);
    }

    @@ -4136,15 +4126,13 @@ init_RTV24 (struct bttv *btv)
    dataRead = btread (BT848_GPIO_DATA);

    if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
    - printk (KERN_INFO
    - "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
    + pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
    btv->c.nr, dataRead);

    return;
    }

    - printk (KERN_INFO
    - "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
    + pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr);
    }


    @@ -4261,22 +4249,25 @@ static int tea5757_read(struct bttv *btv)
    while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
    schedule();
    if (bus_in(btv,btv->mbox_data)) {
    - printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
    + pr_warn("%d: tea5757: read timeout\n", btv->c.nr);
    return -1;
    }

    - dprintk("bttv%d: tea5757:",btv->c.nr);
    + dprintk("%d: tea5757:", btv->c.nr);
    for (i = 0; i < 24; i++) {
    udelay(5);
    bus_high(btv,btv->mbox_clk);
    udelay(5);
    - dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
    + dprintk_cont("%c",
    + bus_in(btv, btv->mbox_most) == 0 ? 'T' : '-');
    bus_low(btv,btv->mbox_clk);
    value <<= 1;
    value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
    - dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
    + dprintk_cont("%c",
    + bus_in(btv, btv->mbox_most) == 0 ? 'S' : 'M');
    }
    - dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
    + dprintk_cont("\n");
    + dprintk("%d: tea5757: read 0x%X\n", btv->c.nr, value);
    return value;
    }

    @@ -4295,7 +4286,7 @@ static int tea5757_write(struct bttv *btv, int value)
    if (bttv_gpio)
    bttv_gpio_tracking(btv,"tea5757 write");

    - dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
    + dprintk("%d: tea5757: write 0x%X\n", btv->c.nr, value);
    bus_low(btv,btv->mbox_clk);
    bus_high(btv,btv->mbox_we);
    for (i = 0; i < 25; i++) {
    @@ -4547,7 +4538,7 @@ static void picolo_tetra_init(struct bttv *btv)
    static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
    {

    - dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
    + dprintk("%d : picolo_tetra_muxsel => input = %d\n", btv->c.nr, input);
    /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
    /*GPIO[20]&GPIO[21] used to choose the right input*/
    btwrite (input<<20,BT848_GPIO_DATA);
    @@ -4592,7 +4583,7 @@ static void ivc120_muxsel(struct bttv *btv, unsigned int input)
    int key = input % 4;
    int matrix = input / 4;

    - dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
    + dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
    btv->c.nr, input, matrix, key);

    /* Handles the input selection on the TDA8540's */
    @@ -4649,15 +4640,17 @@ static void PXC200_muxsel(struct bttv *btv, unsigned int input)
    buf[1]=0;
    rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
    if (rc) {
    - printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
    + pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n",
    + btv->c.nr, rc);
    /* not PXC ? do nothing */
    - return;
    + return;
    }

    rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
    if (!(rc & PX_CFG_PXC200F)) {
    - printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
    - return;
    + pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n",
    + btv->c.nr, rc);
    + return;
    }


    @@ -4696,7 +4689,7 @@ static void PXC200_muxsel(struct bttv *btv, unsigned int input)
    else /* older device */
    btand(~BT848_IFORM_MUXSEL,BT848_IFORM);

    - printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
    + pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux);
    }

    static void phytec_muxsel(struct bttv *btv, unsigned int input)
    @@ -4847,29 +4840,27 @@ void __init bttv_check_chipset(void)

    /* print warnings about any quirks found */
    if (triton1)
    - printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
    + pr_info("Host bridge needs ETBF enabled\n");
    if (vsfx)
    - printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
    + pr_info("Host bridge needs VSFX enabled\n");
    if (pcipci_fail) {
    - printk(KERN_INFO "bttv: bttv and your chipset may not work "
    - "together.\n");
    + pr_info("bttv and your chipset may not work together\n");
    if (!no_overlay) {
    - printk(KERN_INFO "bttv: overlay will be disabled.\n");
    + pr_info("overlay will be disabled\n");
    no_overlay = 1;
    } else {
    - printk(KERN_INFO "bttv: overlay forced. Use this "
    - "option at your own risk.\n");
    + pr_info("overlay forced. Use this option at your own risk.\n");
    }
    }
    if (UNSET != latency)
    - printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
    + pr_info("pci latency fixup [%d]\n", latency);
    while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
    PCI_DEVICE_ID_INTEL_82441, dev))) {
    unsigned char b;
    pci_read_config_byte(dev, 0x53, &b);
    if (bttv_debug)
    - printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
    - "bufcon=0x%02x\n",b);
    + pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n",
    + b);
    }
    }

    @@ -4882,12 +4873,13 @@ int __devinit bttv_handle_chipset(struct bttv *btv)

    if (bttv_verbose) {
    if (triton1)
    - printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
    + pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n",
    + btv->c.nr);
    if (vsfx && btv->id >= 878)
    - printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
    + pr_info("%d: enabling VSFX\n", btv->c.nr);
    if (UNSET != latency)
    - printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
    - btv->c.nr,latency);
    + pr_info("%d: setting pci timer to %d\n",
    + btv->c.nr, latency);
    }

    if (btv->id < 878) {
    diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
    index 14444de..3dd0660 100644
    --- a/drivers/media/video/bt8xx/bttv-driver.c
    +++ b/drivers/media/video/bt8xx/bttv-driver.c
    @@ -34,6 +34,8 @@
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
    */

    +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
    +
    #include <linux/init.h>
    #include <linux/module.h>
    #include <linux/delay.h>
    @@ -942,8 +944,8 @@ static
    void free_btres_lock(struct bttv *btv, struct bttv_fh *fh, int bits)
    {
    if ((fh->resources & bits) != bits) {
    - /* trying to free ressources not allocated by us ... */
    - printk("bttv: BUG! (btres)\n");
    + /* trying to free resources not allocated by us ... */
    + pr_err("BUG! (btres)\n");
    }
    fh->resources &= ~bits;
    btv->resources &= ~bits;
    @@ -1000,7 +1002,7 @@ static void set_pll(struct bttv *btv)
    return;

    if (btv->pll.pll_ofreq == btv->pll.pll_current) {
    - dprintk("bttv%d: PLL: no change required\n",btv->c.nr);
    + dprintk("%d: PLL: no change required\n", btv->c.nr);
    return;
    }

    @@ -1008,21 +1010,23 @@ static void set_pll(struct bttv *btv)
    /* no PLL needed */
    if (btv->pll.pll_current == 0)
    return;
    - bttv_printk(KERN_INFO "bttv%d: PLL can sleep, using XTAL (%d).\n",
    - btv->c.nr,btv->pll.pll_ifreq);
    + if (bttv_verbose)
    + pr_info("%d: PLL can sleep, using XTAL (%d)\n",
    + btv->c.nr, btv->pll.pll_ifreq);
    btwrite(0x00,BT848_TGCTRL);
    btwrite(0x00,BT848_PLL_XCI);
    btv->pll.pll_current = 0;
    return;
    }

    - bttv_printk(KERN_INFO "bttv%d: PLL: %d => %d ",btv->c.nr,
    - btv->pll.pll_ifreq, btv->pll.pll_ofreq);
    + if (bttv_verbose)
    + pr_info("%d: Setting PLL: %d => %d (needs up to 100ms)\n",
    + btv->c.nr,
    + btv->pll.pll_ifreq, btv->pll.pll_ofreq);
    set_pll_freq(btv, btv->pll.pll_ifreq, btv->pll.pll_ofreq);

    for (i=0; i<10; i++) {
    /* Let other people run while the PLL stabilizes */
    - bttv_printk(".");
    msleep(10);

    if (btread(BT848_DSTATUS) & BT848_DSTATUS_PLOCK) {
    @@ -1030,12 +1034,14 @@ static void set_pll(struct bttv *btv)
    } else {
    btwrite(0x08,BT848_TGCTRL);
    btv->pll.pll_current = btv->pll.pll_ofreq;
    - bttv_printk(" ok\n");
    + if (bttv_verbose)
    + pr_info("PLL set ok\n");
    return;
    }
    }
    btv->pll.pll_current = -1;
    - bttv_printk("failed\n");
    + if (bttv_verbose)
    + pr_info("Setting PLL failed\n");
    return;
    }

    @@ -1047,7 +1053,7 @@ static void bt848A_set_timing(struct bttv *btv)
    int fsc = bttv_tvnorms[btv->tvnorm].Fsc;

    if (btv->input == btv->dig) {
    - dprintk("bttv%d: load digital timing table (table_idx=%d)\n",
    + dprintk("%d: load digital timing table (table_idx=%d)\n",
    btv->c.nr,table_idx);

    /* timing change...reset timing generator address */
    @@ -1076,7 +1082,7 @@ static void bt848_bright(struct bttv *btv, int bright)
    {
    int value;

    - // printk("bttv: set bright: %d\n",bright); // DEBUG
    + // printk("set bright: %d\n", bright); // DEBUG
    btv->bright = bright;

    /* We want -128 to 127 we get 0-65535 */
    @@ -1150,8 +1156,7 @@ video_mux(struct bttv *btv, unsigned int input)
    }
    mux = bttv_muxsel(btv, input);
    btaor(mux<<5, ~(3<<5), BT848_IFORM);
    - dprintk(KERN_DEBUG "bttv%d: video mux: input=%d mux=%d\n",
    - btv->c.nr,input,mux);
    + dprintk("%d: video mux: input=%d mux=%d\n", btv->c.nr, input, mux);

    /* card specific hook */
    if(bttv_tvcards[btv->c.type].muxsel_hook)
    @@ -1440,7 +1445,7 @@ static void bttv_reinit_bt848(struct bttv *btv)
    unsigned long flags;

    if (bttv_verbose)
    - printk(KERN_INFO "bttv%d: reset, reinitialize\n",btv->c.nr);
    + pr_info("%d: reset, reinitialize\n", btv->c.nr);
    spin_lock_irqsave(&btv->s_lock,flags);
    btv->errors=0;
    bttv_set_dma(btv,0);
    @@ -1622,8 +1627,8 @@ void bttv_gpio_tracking(struct bttv *btv, char *comment)
    unsigned int outbits, data;
    outbits = btread(BT848_GPIO_OUT_EN);
    data = btread(BT848_GPIO_DATA);
    - printk(KERN_DEBUG "bttv%d: gpio: en=%08x, out=%08x in=%08x [%s]\n",
    - btv->c.nr,outbits,data & outbits, data & ~outbits, comment);
    + pr_debug("%d: gpio: en=%08x, out=%08x in=%08x [%s]\n",
    + btv->c.nr, outbits, data & outbits, data & ~outbits, comment);
    }

    static void bttv_field_count(struct bttv *btv)
    @@ -1668,7 +1673,7 @@ bttv_switch_overlay(struct bttv *btv, struct bttv_fh *fh,
    unsigned long flags;
    int retval = 0;

    - dprintk("switch_overlay: enter [new=%p]\n",new);
    + dprintk("switch_overlay: enter [new=%p]\n", new);
    if (new)
    new->vb.state = VIDEOBUF_DONE;
    spin_lock_irqsave(&btv->s_lock,flags);
    @@ -1678,7 +1683,8 @@ bttv_switch_overlay(struct bttv *btv, struct bttv_fh *fh,
    bttv_set_dma(btv, 0x03);
    spin_unlock_irqrestore(&btv->s_lock,flags);
    if (NULL != old) {
    - dprintk("switch_overlay: old=%p state is %d\n",old,old->vb.state);
    + dprintk("switch_overlay: old=%p state is %d\n",
    + old, old->vb.state);
    bttv_dma_free(&fh->cap,btv, old);
    kfree(old);
    }
    @@ -2029,11 +2035,11 @@ static int bttv_log_status(struct file *file, void *f)
    struct bttv_fh *fh = f;
    struct bttv *btv = fh->btv;

    - printk(KERN_INFO "bttv%d: ======== START STATUS CARD #%d ========\n",
    - btv->c.nr, btv->c.nr);
    + pr_info("%d: ======== START STATUS CARD #%d ========\n",
    + btv->c.nr, btv->c.nr);
    bttv_call_all(btv, core, log_status);
    - printk(KERN_INFO "bttv%d: ======== END STATUS CARD #%d ========\n",
    - btv->c.nr, btv->c.nr);
    + pr_info("%d: ======== END STATUS CARD #%d ========\n",
    + btv->c.nr, btv->c.nr);
    return 0;
    }

    @@ -2598,7 +2604,7 @@ static int bttv_s_fmt_vid_overlay(struct file *file, void *priv,
    struct bttv *btv = fh->btv;

    if (no_overlay > 0) {
    - printk(KERN_ERR "V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n");
    + pr_err("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n");
    return -EINVAL;
    }

    @@ -2673,7 +2679,7 @@ static int bttv_enum_fmt_vid_overlay(struct file *file, void *priv,
    int rc;

    if (no_overlay > 0) {
    - printk(KERN_ERR "V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n");
    + pr_err("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n");
    return -EINVAL;
    }

    @@ -2714,7 +2720,7 @@ static int bttv_overlay(struct file *file, void *f, unsigned int on)
    return -EINVAL;
    }
    if (unlikely(!fh->ov.setup_ok)) {
    - dprintk("bttv%d: overlay: !setup_ok\n", btv->c.nr);
    + dprintk("%d: overlay: !setup_ok\n", btv->c.nr);
    retval = -EINVAL;
    }
    if (retval)
    @@ -3091,8 +3097,8 @@ static ssize_t bttv_read(struct file *file, char __user *data,

    if (fh->btv->errors)
    bttv_reinit_bt848(fh->btv);
    - dprintk("bttv%d: read count=%d type=%s\n",
    - fh->btv->c.nr,(int)count,v4l2_type_names[fh->type]);
    + dprintk("%d: read count=%d type=%s\n",
    + fh->btv->c.nr, (int)count, v4l2_type_names[fh->type]);

    switch (fh->type) {
    case V4L2_BUF_TYPE_VIDEO_CAPTURE:
    @@ -3174,7 +3180,7 @@ static int bttv_open(struct file *file)
    struct bttv_fh *fh;
    enum v4l2_buf_type type = 0;

    - dprintk(KERN_DEBUG "bttv: open dev=%s\n", video_device_node_name(vdev));
    + dprintk("open dev=%s\n", video_device_node_name(vdev));

    if (vdev->vfl_type == VFL_TYPE_GRABBER) {
    type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
    @@ -3185,8 +3191,8 @@ static int bttv_open(struct file *file)
    return -ENODEV;
    }

    - dprintk(KERN_DEBUG "bttv%d: open called (type=%s)\n",
    - btv->c.nr,v4l2_type_names[type]);
    + dprintk("%d: open called (type=%s)\n",
    + btv->c.nr, v4l2_type_names[type]);

    /* allocate per filehandle data */
    fh = kmalloc(sizeof(*fh), GFP_KERNEL);
    @@ -3288,7 +3294,7 @@ bttv_mmap(struct file *file, struct vm_area_struct *vma)
    {
    struct bttv_fh *fh = file->private_data;

    - dprintk("bttv%d: mmap type=%s 0x%lx+%ld\n",
    + dprintk("%d: mmap type=%s 0x%lx+%ld\n",
    fh->btv->c.nr, v4l2_type_names[fh->type],
    vma->vm_start, vma->vm_end - vma->vm_start);
    return videobuf_mmap_mapper(bttv_queue(fh),vma);
    @@ -3370,9 +3376,9 @@ static int radio_open(struct file *file)
    struct bttv *btv = video_drvdata(file);
    struct bttv_fh *fh;

    - dprintk("bttv: open dev=%s\n", video_device_node_name(vdev));
    + dprintk("open dev=%s\n", video_device_node_name(vdev));

    - dprintk("bttv%d: open called (radio)\n",btv->c.nr);
    + dprintk("%d: open called (radio)\n", btv->c.nr);

    /* allocate per filehandle data */
    fh = kmalloc(sizeof(*fh), GFP_KERNEL);
    @@ -3616,12 +3622,12 @@ static int bttv_risc_decode(u32 risc)
    };
    int i;

    - printk("0x%08x [ %s", risc,
    + pr_cont("0x%08x [ %s", risc,
    instr[risc >> 28] ? instr[risc >> 28] : "INVALID");
    for (i = ARRAY_SIZE(bits)-1; i >= 0; i--)
    if (risc & (1 << (i + 12)))
    - printk(" %s",bits[i]);
    - printk(" count=%d ]\n", risc & 0xfff);
    + pr_cont(" %s", bits[i]);
    + pr_cont(" count=%d ]\n", risc & 0xfff);
    return incr[risc >> 28] ? incr[risc >> 28] : 1;
    }

    @@ -3630,16 +3636,18 @@ static void bttv_risc_disasm(struct bttv *btv,
    {
    unsigned int i,j,n;

    - printk("%s: risc disasm: %p [dma=0x%08lx]\n",
    - btv->c.v4l2_dev.name, risc->cpu, (unsigned long)risc->dma);
    + pr_info("%s: risc disasm: %p [dma=0x%08lx]\n",
    + btv->c.v4l2_dev.name, risc->cpu, (unsigned long)risc->dma);
    for (i = 0; i < (risc->size >> 2); i += n) {
    - printk("%s: 0x%lx: ", btv->c.v4l2_dev.name,
    - (unsigned long)(risc->dma + (i<<2)));
    + pr_info("%s: 0x%lx: ",
    + btv->c.v4l2_dev.name,
    + (unsigned long)(risc->dma + (i<<2)));
    n = bttv_risc_decode(le32_to_cpu(risc->cpu[i]));
    for (j = 1; j < n; j++)
    - printk("%s: 0x%lx: 0x%08x [ arg #%d ]\n",
    - btv->c.v4l2_dev.name, (unsigned long)(risc->dma + ((i+j)<<2)),
    - risc->cpu[i+j], j);
    + pr_info("%s: 0x%lx: 0x%08x [ arg #%d ]\n",
    + btv->c.v4l2_dev.name,
    + (unsigned long)(risc->dma + ((i+j)<<2)),
    + risc->cpu[i+j], j);
    if (0 == risc->cpu[i])
    break;
    }
    @@ -3647,17 +3655,18 @@ static void bttv_risc_disasm(struct bttv *btv,

    static void bttv_print_riscaddr(struct bttv *btv)
    {
    - printk(" main: %08Lx\n",
    - (unsigned long long)btv->main.dma);
    - printk(" vbi : o=%08Lx e=%08Lx\n",
    - btv->cvbi ? (unsigned long long)btv->cvbi->top.dma : 0,
    - btv->cvbi ? (unsigned long long)btv->cvbi->bottom.dma : 0);
    - printk(" cap : o=%08Lx e=%08Lx\n",
    - btv->curr.top ? (unsigned long long)btv->curr.top->top.dma : 0,
    - btv->curr.bottom ? (unsigned long long)btv->curr.bottom->bottom.dma : 0);
    - printk(" scr : o=%08Lx e=%08Lx\n",
    - btv->screen ? (unsigned long long)btv->screen->top.dma : 0,
    - btv->screen ? (unsigned long long)btv->screen->bottom.dma : 0);
    + pr_info(" main: %08llx\n", (unsigned long long)btv->main.dma);
    + pr_info(" vbi : o=%08llx e=%08llx\n",
    + btv->cvbi ? (unsigned long long)btv->cvbi->top.dma : 0,
    + btv->cvbi ? (unsigned long long)btv->cvbi->bottom.dma : 0);
    + pr_info(" cap : o=%08llx e=%08llx\n",
    + btv->curr.top
    + ? (unsigned long long)btv->curr.top->top.dma : 0,
    + btv->curr.bottom
    + ? (unsigned long long)btv->curr.bottom->bottom.dma : 0);
    + pr_info(" scr : o=%08llx e=%08llx\n",
    + btv->screen ? (unsigned long long)btv->screen->top.dma : 0,
    + btv->screen ? (unsigned long long)btv->screen->bottom.dma : 0);
    bttv_risc_disasm(btv, &btv->main);
    }

    @@ -3690,34 +3699,34 @@ static void bttv_print_irqbits(u32 print, u32 mark)
    {
    unsigned int i;

    - printk("bits:");
    + pr_cont("bits:");
    for (i = 0; i < ARRAY_SIZE(irq_name); i++) {
    if (print & (1 << i))
    - printk(" %s",irq_name[i]);
    + pr_cont(" %s", irq_name[i]);
    if (mark & (1 << i))
    - printk("*");
    + pr_cont("*");
    }
    }

    static void bttv_irq_debug_low_latency(struct bttv *btv, u32 rc)
    {
    - printk("bttv%d: irq: skipped frame [main=%lx,o_vbi=%lx,o_field=%lx,rc=%lx]\n",
    - btv->c.nr,
    - (unsigned long)btv->main.dma,
    - (unsigned long)le32_to_cpu(btv->main.cpu[RISC_SLOT_O_VBI+1]),
    - (unsigned long)le32_to_cpu(btv->main.cpu[RISC_SLOT_O_FIELD+1]),
    - (unsigned long)rc);
    + pr_warn("%d: irq: skipped frame [main=%lx,o_vbi=%lx,o_field=%lx,rc=%lx]\n",
    + btv->c.nr,
    + (unsigned long)btv->main.dma,
    + (unsigned long)le32_to_cpu(btv->main.cpu[RISC_SLOT_O_VBI+1]),
    + (unsigned long)le32_to_cpu(btv->main.cpu[RISC_SLOT_O_FIELD+1]),
    + (unsigned long)rc);

    if (0 == (btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC)) {
    - printk("bttv%d: Oh, there (temporarely?) is no input signal. "
    - "Ok, then this is harmless, don't worry ;)\n",
    - btv->c.nr);
    + pr_notice("%d: Oh, there (temporarily?) is no input signal. "
    + "Ok, then this is harmless, don't worry ;)\n",
    + btv->c.nr);
    return;
    }
    - printk("bttv%d: Uhm. Looks like we have unusual high IRQ latencies.\n",
    - btv->c.nr);
    - printk("bttv%d: Lets try to catch the culpit red-handed ...\n",
    - btv->c.nr);
    + pr_notice("%d: Uhm. Looks like we have unusual high IRQ latencies\n",
    + btv->c.nr);
    + pr_notice("%d: Lets try to catch the culpit red-handed ...\n",
    + btv->c.nr);
    dump_stack();
    }

    @@ -3798,9 +3807,9 @@ bttv_irq_next_video(struct bttv *btv, struct bttv_buffer_set *set)
    }
    }

    - dprintk("bttv%d: next set: top=%p bottom=%p [screen=%p,irq=%d,%d]\n",
    - btv->c.nr,set->top, set->bottom,
    - btv->screen,set->frame_irq,set->top_irq);
    + dprintk("%d: next set: top=%p bottom=%p [screen=%p,irq=%d,%d]\n",
    + btv->c.nr, set->top, set->bottom,
    + btv->screen, set->frame_irq, set->top_irq);
    return 0;
    }

    @@ -3815,7 +3824,8 @@ bttv_irq_wakeup_video(struct bttv *btv, struct bttv_buffer_set *wakeup,
    if (wakeup->top == wakeup->bottom) {
    if (NULL != wakeup->top && curr->top != wakeup->top) {
    if (irq_debug > 1)
    - printk("bttv%d: wakeup: both=%p\n",btv->c.nr,wakeup->top);
    + pr_debug("%d: wakeup: both=%p\n",
    + btv->c.nr, wakeup->top);
    wakeup->top->vb.ts = ts;
    wakeup->top->vb.field_count = btv->field_count;
    wakeup->top->vb.state = state;
    @@ -3824,7 +3834,8 @@ bttv_irq_wakeup_video(struct bttv *btv, struct bttv_buffer_set *wakeup,
    } else {
    if (NULL != wakeup->top && curr->top != wakeup->top) {
    if (irq_debug > 1)
    - printk("bttv%d: wakeup: top=%p\n",btv->c.nr,wakeup->top);
    + pr_debug("%d: wakeup: top=%p\n",
    + btv->c.nr, wakeup->top);
    wakeup->top->vb.ts = ts;
    wakeup->top->vb.field_count = btv->field_count;
    wakeup->top->vb.state = state;
    @@ -3832,7 +3843,8 @@ bttv_irq_wakeup_video(struct bttv *btv, struct bttv_buffer_set *wakeup,
    }
    if (NULL != wakeup->bottom && curr->bottom != wakeup->bottom) {
    if (irq_debug > 1)
    - printk("bttv%d: wakeup: bottom=%p\n",btv->c.nr,wakeup->bottom);
    + pr_debug("%d: wakeup: bottom=%p\n",
    + btv->c.nr, wakeup->bottom);
    wakeup->bottom->vb.ts = ts;
    wakeup->bottom->vb.field_count = btv->field_count;
    wakeup->bottom->vb.state = state;
    @@ -3866,11 +3878,11 @@ static void bttv_irq_timeout(unsigned long data)
    unsigned long flags;

    if (bttv_verbose) {
    - printk(KERN_INFO "bttv%d: timeout: drop=%d irq=%d/%d, risc=%08x, ",
    - btv->c.nr, btv->framedrop, btv->irq_me, btv->irq_total,
    - btread(BT848_RISC_COUNT));
    + pr_info("%d: timeout: drop=%d irq=%d/%d, risc=%08x, ",
    + btv->c.nr, btv->framedrop, btv->irq_me, btv->irq_total,
    + btread(BT848_RISC_COUNT));
    bttv_print_irqbits(btread(BT848_INT_STAT),0);
    - printk("\n");
    + pr_cont("\n");
    }

    spin_lock_irqsave(&btv->s_lock,flags);
    @@ -4033,21 +4045,23 @@ static irqreturn_t bttv_irq(int irq, void *dev_id)
    dstat=btread(BT848_DSTATUS);

    if (irq_debug) {
    - printk(KERN_DEBUG "bttv%d: irq loop=%d fc=%d "
    - "riscs=%x, riscc=%08x, ",
    - btv->c.nr, count, btv->field_count,
    - stat>>28, btread(BT848_RISC_COUNT));
    + pr_debug("%d: irq loop=%d fc=%d riscs=%x, riscc=%08x, ",
    + btv->c.nr, count, btv->field_count,
    + stat>>28, btread(BT848_RISC_COUNT));
    bttv_print_irqbits(stat,astat);
    if (stat & BT848_INT_HLOCK)
    - printk(" HLOC => %s", (dstat & BT848_DSTATUS_HLOC)
    - ? "yes" : "no");
    + pr_cont(" HLOC => %s",
    + dstat & BT848_DSTATUS_HLOC
    + ? "yes" : "no");
    if (stat & BT848_INT_VPRES)
    - printk(" PRES => %s", (dstat & BT848_DSTATUS_PRES)
    - ? "yes" : "no");
    + pr_cont(" PRES => %s",
    + dstat & BT848_DSTATUS_PRES
    + ? "yes" : "no");
    if (stat & BT848_INT_FMTCHG)
    - printk(" NUML => %s", (dstat & BT848_DSTATUS_NUML)
    - ? "625" : "525");
    - printk("\n");
    + pr_cont(" NUML => %s",
    + dstat & BT848_DSTATUS_NUML
    + ? "625" : "525");
    + pr_cont("\n");
    }

    if (astat&BT848_INT_VSYNC)
    @@ -4075,18 +4089,19 @@ static irqreturn_t bttv_irq(int irq, void *dev_id)
    audio_mute(btv, btv->mute); /* trigger automute */

    if (astat & (BT848_INT_SCERR|BT848_INT_OCERR)) {
    - printk(KERN_INFO "bttv%d: %s%s @ %08x,",btv->c.nr,
    - (astat & BT848_INT_SCERR) ? "SCERR" : "",
    - (astat & BT848_INT_OCERR) ? "OCERR" : "",
    - btread(BT848_RISC_COUNT));
    + pr_info("%d: %s%s @ %08x,",
    + btv->c.nr,
    + (astat & BT848_INT_SCERR) ? "SCERR" : "",
    + (astat & BT848_INT_OCERR) ? "OCERR" : "",
    + btread(BT848_RISC_COUNT));
    bttv_print_irqbits(stat,astat);
    - printk("\n");
    + pr_cont("\n");
    if (bttv_debug)
    bttv_print_riscaddr(btv);
    }
    if (fdsr && astat & BT848_INT_FDSR) {
    - printk(KERN_INFO "bttv%d: FDSR @ %08x\n",
    - btv->c.nr,btread(BT848_RISC_COUNT));
    + pr_info("%d: FDSR @ %08x\n",
    + btv->c.nr, btread(BT848_RISC_COUNT));
    if (bttv_debug)
    bttv_print_riscaddr(btv);
    }
    @@ -4097,11 +4112,11 @@ static irqreturn_t bttv_irq(int irq, void *dev_id)
    if (count > 8 || !(astat & BT848_INT_GPINT)) {
    btwrite(0, BT848_INT_MASK);

    - printk(KERN_ERR
    - "bttv%d: IRQ lockup, cleared int mask [", btv->c.nr);
    + pr_err("%d: IRQ lockup, cleared int mask [",
    + btv->c.nr);
    } else {
    - printk(KERN_ERR
    - "bttv%d: IRQ lockup, clearing GPINT from int mask [", btv->c.nr);
    + pr_err("%d: IRQ lockup, clearing GPINT from int mask [",
    + btv->c.nr);

    btwrite(btread(BT848_INT_MASK) & (-1 ^ BT848_INT_GPINT),
    BT848_INT_MASK);
    @@ -4109,7 +4124,7 @@ static irqreturn_t bttv_irq(int irq, void *dev_id)

    bttv_print_irqbits(stat,astat);

    - printk("]\n");
    + pr_cont("]\n");
    }
    }
    btv->irq_total++;
    @@ -4171,7 +4186,7 @@ static void bttv_unregister_video(struct bttv *btv)
    static int __devinit bttv_register_video(struct bttv *btv)
    {
    if (no_overlay > 0)
    - printk("bttv: Overlay support disabled.\n");
    + pr_notice("Overlay support disabled\n");

    /* video */
    btv->video_dev = vdev_init(btv, &bttv_video_template, "video");
    @@ -4181,12 +4196,11 @@ static int __devinit bttv_register_video(struct bttv *btv)
    if (video_register_device(btv->video_dev, VFL_TYPE_GRABBER,
    video_nr[btv->c.nr]) < 0)
    goto err;
    - printk(KERN_INFO "bttv%d: registered device %s\n",
    - btv->c.nr, video_device_node_name(btv->video_dev));
    + pr_info("%d: registered device %s\n",
    + btv->c.nr, video_device_node_name(btv->video_dev));
    if (device_create_file(&btv->video_dev->dev,
    &dev_attr_card)<0) {
    - printk(KERN_ERR "bttv%d: device_create_file 'card' "
    - "failed\n", btv->c.nr);
    + pr_err("%d: device_create_file 'card' failed\n", btv->c.nr);
    goto err;
    }

    @@ -4198,8 +4212,8 @@ static int __devinit bttv_register_video(struct bttv *btv)
    if (video_register_device(btv->vbi_dev, VFL_TYPE_VBI,
    vbi_nr[btv->c.nr]) < 0)
    goto err;
    - printk(KERN_INFO "bttv%d: registered device %s\n",
    - btv->c.nr, video_device_node_name(btv->vbi_dev));
    + pr_info("%d: registered device %s\n",
    + btv->c.nr, video_device_node_name(btv->vbi_dev));

    if (!btv->has_radio)
    return 0;
    @@ -4210,8 +4224,8 @@ static int __devinit bttv_register_video(struct bttv *btv)
    if (video_register_device(btv->radio_dev, VFL_TYPE_RADIO,
    radio_nr[btv->c.nr]) < 0)
    goto err;
    - printk(KERN_INFO "bttv%d: registered device %s\n",
    - btv->c.nr, video_device_node_name(btv->radio_dev));
    + pr_info("%d: registered device %s\n",
    + btv->c.nr, video_device_node_name(btv->radio_dev));

    /* all done */
    return 0;
    @@ -4244,10 +4258,10 @@ static int __devinit bttv_probe(struct pci_dev *dev,

    if (bttv_num == BTTV_MAX)
    return -ENOMEM;
    - printk(KERN_INFO "bttv: Bt8xx card found (%d).\n", bttv_num);
    + pr_info("Bt8xx card found (%d)\n", bttv_num);
    bttvs[bttv_num] = btv = kzalloc(sizeof(*btv), GFP_KERNEL);
    if (btv == NULL) {
    - printk(KERN_ERR "bttv: out of memory.\n");
    + pr_err("out of memory\n");
    return -ENOMEM;
    }
    btv->c.nr = bttv_num;
    @@ -4277,21 +4291,19 @@ static int __devinit bttv_probe(struct pci_dev *dev,
    btv->c.pci = dev;
    btv->id = dev->device;
    if (pci_enable_device(dev)) {
    - printk(KERN_WARNING "bttv%d: Can't enable device.\n",
    - btv->c.nr);
    + pr_warn("%d: Can't enable device\n", btv->c.nr);
    return -EIO;
    }
    if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) {
    - printk(KERN_WARNING "bttv%d: No suitable DMA available.\n",
    - btv->c.nr);
    + pr_warn("%d: No suitable DMA available\n", btv->c.nr);
    return -EIO;
    }
    if (!request_mem_region(pci_resource_start(dev,0),
    pci_resource_len(dev,0),
    btv->c.v4l2_dev.name)) {
    - printk(KERN_WARNING "bttv%d: can't request iomem (0x%llx).\n",
    - btv->c.nr,
    - (unsigned long long)pci_resource_start(dev,0));
    + pr_warn("%d: can't request iomem (0x%llx)\n",
    + btv->c.nr,
    + (unsigned long long)pci_resource_start(dev, 0));
    return -EBUSY;
    }
    pci_set_master(dev);
    @@ -4299,22 +4311,21 @@ static int __devinit bttv_probe(struct pci_dev *dev,

    result = v4l2_device_register(&dev->dev, &btv->c.v4l2_dev);
    if (result < 0) {
    - printk(KERN_WARNING "bttv%d: v4l2_device_register() failed\n", btv->c.nr);
    + pr_warn("%d: v4l2_device_register() failed\n", btv->c.nr);
    goto fail0;
    }

    btv->revision = dev->revision;
    pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
    - printk(KERN_INFO "bttv%d: Bt%d (rev %d) at %s, ",
    - bttv_num,btv->id, btv->revision, pci_name(dev));
    - printk("irq: %d, latency: %d, mmio: 0x%llx\n",
    - btv->c.pci->irq, lat,
    - (unsigned long long)pci_resource_start(dev,0));
    + pr_info("%d: Bt%d (rev %d) at %s, irq: %d, latency: %d, mmio: 0x%llx\n",
    + bttv_num, btv->id, btv->revision, pci_name(dev),
    + btv->c.pci->irq, lat,
    + (unsigned long long)pci_resource_start(dev, 0));
    schedule();

    btv->bt848_mmio = ioremap(pci_resource_start(dev, 0), 0x1000);
    if (NULL == btv->bt848_mmio) {
    - printk("bttv%d: ioremap() failed\n", btv->c.nr);
    + pr_err("%d: ioremap() failed\n", btv->c.nr);
    result = -EIO;
    goto fail1;
    }
    @@ -4327,8 +4338,8 @@ static int __devinit bttv_probe(struct pci_dev *dev,
    result = request_irq(btv->c.pci->irq, bttv_irq,
    IRQF_SHARED | IRQF_DISABLED, btv->c.v4l2_dev.name, (void *)btv);
    if (result < 0) {
    - printk(KERN_ERR "bttv%d: can't get IRQ %d\n",
    - bttv_num,btv->c.pci->irq);
    + pr_err("%d: can't get IRQ %d\n",
    + bttv_num, btv->c.pci->irq);
    goto fail1;
    }

    @@ -4433,7 +4444,7 @@ static void __devexit bttv_remove(struct pci_dev *pci_dev)
    struct bttv *btv = to_bttv(v4l2_dev);

    if (bttv_verbose)
    - printk("bttv%d: unloading\n",btv->c.nr);
    + pr_info("%d: unloading\n", btv->c.nr);

    if (bttv_tvcards[btv->c.type].has_dvb)
    flush_request_modules(btv);
    @@ -4481,7 +4492,7 @@ static int bttv_suspend(struct pci_dev *pci_dev, pm_message_t state)
    struct bttv_buffer_set idle;
    unsigned long flags;

    - dprintk("bttv%d: suspend %d\n", btv->c.nr, state.event);
    + dprintk("%d: suspend %d\n", btv->c.nr, state.event);

    /* stop dma + irqs */
    spin_lock_irqsave(&btv->s_lock,flags);
    @@ -4517,14 +4528,13 @@ static int bttv_resume(struct pci_dev *pci_dev)
    unsigned long flags;
    int err;

    - dprintk("bttv%d: resume\n", btv->c.nr);
    + dprintk("%d: resume\n", btv->c.nr);

    /* restore pci state */
    if (btv->state.disabled) {
    err=pci_enable_device(pci_dev);
    if (err) {
    - printk(KERN_WARNING "bttv%d: Can't enable device.\n",
    - btv->c.nr);
    + pr_warn("%d: Can't enable device\n", btv->c.nr);
    return err;
    }
    btv->state.disabled = 0;
    @@ -4532,8 +4542,7 @@ static int bttv_resume(struct pci_dev *pci_dev)
    err=pci_set_power_state(pci_dev, PCI_D0);
    if (err) {
    pci_disable_device(pci_dev);
    - printk(KERN_WARNING "bttv%d: Can't enable device.\n",
    - btv->c.nr);
    + pr_warn("%d: Can't enable device\n", btv->c.nr);
    btv->state.disabled = 1;
    return err;
    }
    @@ -4585,22 +4594,21 @@ static int __init bttv_init_module(void)

    bttv_num = 0;

    - printk(KERN_INFO "bttv: driver version %s loaded\n",
    - BTTV_VERSION);
    + pr_info("driver version %s loaded\n", BTTV_VERSION);
    if (gbuffers < 2 || gbuffers > VIDEO_MAX_FRAME)
    gbuffers = 2;
    if (gbufsize > BTTV_MAX_FBUF)
    gbufsize = BTTV_MAX_FBUF;
    gbufsize = (gbufsize + PAGE_SIZE - 1) & PAGE_MASK;
    if (bttv_verbose)
    - printk(KERN_INFO "bttv: using %d buffers with %dk (%d pages) each for capture\n",
    - gbuffers, gbufsize >> 10, gbufsize >> PAGE_SHIFT);
    + pr_info("using %d buffers with %dk (%d pages) each for capture\n",
    + gbuffers, gbufsize >> 10, gbufsize >> PAGE_SHIFT);

    bttv_check_chipset();

    ret = bus_register(&bttv_sub_bus_type);
    if (ret < 0) {
    - printk(KERN_WARNING "bttv: bus_register error: %d\n", ret);
    + pr_warn("bus_register error: %d\n", ret);
    return ret;
    }
    ret = pci_register_driver(&bttv_pci_driver);
    diff --git a/drivers/media/video/bt8xx/bttv-gpio.c b/drivers/media/video/bt8xx/bttv-gpio.c
    index 13ce72c..922e823 100644
    --- a/drivers/media/video/bt8xx/bttv-gpio.c
    +++ b/drivers/media/video/bt8xx/bttv-gpio.c
    @@ -26,6 +26,8 @@

    */

    +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
    +
    #include <linux/module.h>
    #include <linux/init.h>
    #include <linux/delay.h>
    @@ -99,7 +101,7 @@ int bttv_sub_add_device(struct bttv_core *core, char *name)
    kfree(sub);
    return err;
    }
    - printk("bttv%d: add subdevice \"%s\"\n", core->nr, dev_name(&sub->dev));
    + pr_info("%d: add subdevice \"%s\"\n", core->nr, dev_name(&sub->dev));
    list_add_tail(&sub->list,&core->subs);
    return 0;
    }
    diff --git a/drivers/media/video/bt8xx/bttv-i2c.c b/drivers/media/video/bt8xx/bttv-i2c.c
    index d49b675..e3952af 100644
    --- a/drivers/media/video/bt8xx/bttv-i2c.c
    +++ b/drivers/media/video/bt8xx/bttv-i2c.c
    @@ -27,6 +27,8 @@

    */

    +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
    +
    #include <linux/module.h>
    #include <linux/init.h>
    #include <linux/delay.h>
    @@ -154,9 +156,7 @@ bttv_i2c_sendbytes(struct bttv *btv, const struct i2c_msg *msg, int last)
    if (retval == 0)
    goto eio;
    if (i2c_debug) {
    - printk(" <W %02x %02x", msg->addr << 1, msg->buf[0]);
    - if (!(xmit & BT878_I2C_NOSTOP))
    - printk(" >\n");
    + pr_cont(" <W %02x %02x", msg->addr << 1, msg->buf[0]);
    }

    for (cnt = 1; cnt < msg->len; cnt++ ) {
    @@ -170,19 +170,18 @@ bttv_i2c_sendbytes(struct bttv *btv, const struct i2c_msg *msg, int last)
    goto err;
    if (retval == 0)
    goto eio;
    - if (i2c_debug) {
    - printk(" %02x", msg->buf[cnt]);
    - if (!(xmit & BT878_I2C_NOSTOP))
    - printk(" >\n");
    - }
    + if (i2c_debug)
    + pr_cont(" %02x", msg->buf[cnt]);
    }
    + if (!(xmit & BT878_I2C_NOSTOP))
    + pr_cont(">\n");
    return msg->len;

    eio:
    retval = -EIO;
    err:
    if (i2c_debug)
    - printk(" ERR: %d\n",retval);
    + pr_cont(" ERR: %d\n",retval);
    return retval;
    }

    @@ -193,7 +192,7 @@ bttv_i2c_readbytes(struct bttv *btv, const struct i2c_msg *msg, int last)
    u32 cnt;
    int retval;

    - for(cnt = 0; cnt < msg->len; cnt++) {
    + for (cnt = 0; cnt < msg->len; cnt++) {
    xmit = (msg->addr << 25) | (1 << 24) | I2C_HW;
    if (cnt < msg->len-1)
    xmit |= BT848_I2C_W3B;
    @@ -201,6 +200,12 @@ bttv_i2c_readbytes(struct bttv *btv, const struct i2c_msg *msg, int last)
    xmit |= BT878_I2C_NOSTOP;
    if (cnt)
    xmit |= BT878_I2C_NOSTART;
    +
    + if (i2c_debug) {
    + if (!(xmit & BT878_I2C_NOSTART))
    + pr_cont(" <R %02x", (msg->addr << 1) +1);
    + }
    +
    btwrite(xmit, BT848_I2C);
    retval = bttv_i2c_wait_done(btv);
    if (retval < 0)
    @@ -209,20 +214,20 @@ bttv_i2c_readbytes(struct bttv *btv, const struct i2c_msg *msg, int last)
    goto eio;
    msg->buf[cnt] = ((u32)btread(BT848_I2C) >> 8) & 0xff;
    if (i2c_debug) {
    - if (!(xmit & BT878_I2C_NOSTART))
    - printk(" <R %02x", (msg->addr << 1) +1);
    - printk(" =%02x", msg->buf[cnt]);
    - if (!(xmit & BT878_I2C_NOSTOP))
    - printk(" >\n");
    + pr_cont(" =%02x", msg->buf[cnt]);
    }
    + if (i2c_debug && !(xmit & BT878_I2C_NOSTOP))
    + pr_cont(" >\n");
    }
    +
    +
    return msg->len;

    eio:
    retval = -EIO;
    err:
    if (i2c_debug)
    - printk(" ERR: %d\n",retval);
    + pr_cont(" ERR: %d\n",retval);
    return retval;
    }

    @@ -234,7 +239,8 @@ static int bttv_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int
    int i;

    if (i2c_debug)
    - printk("bt-i2c:");
    + pr_debug("bt-i2c:");
    +
    btwrite(BT848_INT_I2CDONE|BT848_INT_RACK, BT848_INT_STAT);
    for (i = 0 ; i < num; i++) {
    if (msgs[i].flags & I2C_M_RD) {
    @@ -271,20 +277,20 @@ int bttv_I2CRead(struct bttv *btv, unsigned char addr, char *probe_for)
    if (0 != btv->i2c_rc)
    return -1;
    if (bttv_verbose && NULL != probe_for)
    - printk(KERN_INFO "bttv%d: i2c: checking for %s @ 0x%02x... ",
    - btv->c.nr,probe_for,addr);
    + pr_info("%d: i2c: checking for %s @ 0x%02x... ",
    + btv->c.nr, probe_for, addr);
    btv->i2c_client.addr = addr >> 1;
    if (1 != i2c_master_recv(&btv->i2c_client, &buffer, 1)) {
    if (NULL != probe_for) {
    if (bttv_verbose)
    - printk("not found\n");
    + pr_cont("not found\n");
    } else
    - printk(KERN_WARNING "bttv%d: i2c read 0x%x: error\n",
    - btv->c.nr,addr);
    + pr_warn("%d: i2c read 0x%x: error\n",
    + btv->c.nr, addr);
    return -1;
    }
    if (bttv_verbose && NULL != probe_for)
    - printk("found\n");
    + pr_cont("found\n");
    return buffer;
    }

    @@ -335,8 +341,8 @@ static void do_i2c_scan(char *name, struct i2c_client *c)
    rc = i2c_master_recv(c,&buf,0);
    if (rc < 0)
    continue;
    - printk("%s: i2c scan: found device @ 0x%x [%s]\n",
    - name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
    + pr_info("%s: i2c scan: found device @ 0x%x [%s]\n",
    + name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
    }
    }

    diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
    index 677d70c..ef4c7cd 100644
    --- a/drivers/media/video/bt8xx/bttv-input.c
    +++ b/drivers/media/video/bt8xx/bttv-input.c
    @@ -18,6 +18,8 @@
    * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
    */

    +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
    +
    #include <linux/module.h>
    #include <linux/init.h>
    #include <linux/delay.h>
    @@ -36,9 +38,10 @@ static int ir_rc5_remote_gap = 885;
    module_param(ir_rc5_remote_gap, int, 0644);

    #undef dprintk
    -#define dprintk(arg...) do { \
    - if (ir_debug >= 1) \
    - printk(arg); \
    +#define dprintk(fmt, ...) \
    +do { \
    + if (ir_debug >= 1) \
    + pr_info(fmt, ##__VA_ARGS__); \
    } while (0)

    #define DEVNAME "bttv-input"
    @@ -62,7 +65,7 @@ static void ir_handle_key(struct bttv *btv)

    /* extract data */
    data = ir_extract_bits(gpio, ir->mask_keycode);
    - dprintk(KERN_INFO DEVNAME ": irq gpio=0x%x code=%d | %s%s%s\n",
    + dprintk("irq gpio=0x%x code=%d | %s%s%s\n",
    gpio, data,
    ir->polling ? "poll" : "irq",
    (gpio & ir->mask_keydown) ? " down" : "",
    @@ -96,7 +99,7 @@ static void ir_enltv_handle_key(struct bttv *btv)
    keyup = (gpio & ir->mask_keyup) ? 1 << 31 : 0;

    if ((ir->last_gpio & 0x7f) != data) {
    - dprintk(KERN_INFO DEVNAME ": gpio=0x%x code=%d | %s\n",
    + dprintk("gpio=0x%x code=%d | %s\n",
    gpio, data,
    (gpio & ir->mask_keyup) ? " up" : "up/down");

    @@ -107,7 +110,7 @@ static void ir_enltv_handle_key(struct bttv *btv)
    if ((ir->last_gpio & 1 << 31) == keyup)
    return;

    - dprintk(KERN_INFO DEVNAME ":(cnt) gpio=0x%x code=%d | %s\n",
    + dprintk("(cnt) gpio=0x%x code=%d | %s\n",
    gpio, data,
    (gpio & ir->mask_keyup) ? " up" : "down");

    @@ -177,13 +180,12 @@ static u32 bttv_rc5_decode(unsigned int code)
    rc5 |= 1;
    break;
    case 3:
    - dprintk(KERN_INFO DEVNAME ":rc5_decode(%x) bad code\n",
    + dprintk("rc5_decode(%x) bad code\n",
    org_code);
    return 0;
    }
    }
    - dprintk(KERN_INFO DEVNAME ":"
    - "code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
    + dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
    "instr=%x\n", rc5, org_code, RC5_START(rc5),
    RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
    return rc5;
    @@ -212,20 +214,20 @@ static void bttv_rc5_timer_end(unsigned long data)

    /* Allow some timer jitter (RC5 is ~24ms anyway so this is ok) */
    if (gap < 28000) {
    - dprintk(KERN_INFO DEVNAME ": spurious timer_end\n");
    + dprintk("spurious timer_end\n");
    return;
    }

    if (ir->last_bit < 20) {
    /* ignore spurious codes (caused by light/other remotes) */
    - dprintk(KERN_INFO DEVNAME ": short code: %x\n", ir->code);
    + dprintk("short code: %x\n", ir->code);
    } else {
    ir->code = (ir->code << ir->shift_by) | 1;
    rc5 = bttv_rc5_decode(ir->code);

    /* two start bits? */
    if (RC5_START(rc5) != ir->start) {
    - printk(KERN_INFO DEVNAME ":"
    + pr_info(DEVNAME ":"
    " rc5 start bits invalid: %u\n", RC5_START(rc5));

    /* right address? */
    @@ -235,8 +237,7 @@ static void bttv_rc5_timer_end(unsigned long data)

    /* Good code */
    rc_keydown(ir->dev, instr, toggle);
    - dprintk(KERN_INFO DEVNAME ":"
    - " instruction %x, toggle %x\n",
    + dprintk("instruction %x, toggle %x\n",
    instr, toggle);
    }
    }
    @@ -265,7 +266,7 @@ static int bttv_rc5_irq(struct bttv *btv)
    tv.tv_usec - ir->base_time.tv_usec;
    }

    - dprintk(KERN_INFO DEVNAME ": RC5 IRQ: gap %d us for %s\n",
    + dprintk("RC5 IRQ: gap %d us for %s\n",
    gap, (gpio & 0x20) ? "mark" : "space");

    /* remote IRQ? */
    @@ -340,14 +341,14 @@ static int get_key_pv951(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)

    /* poll IR chip */
    if (1 != i2c_master_recv(ir->c, &b, 1)) {
    - dprintk(KERN_INFO DEVNAME ": read error\n");
    + dprintk("read error\n");
    return -EIO;
    }

    /* ignore 0xaa */
    if (b==0xaa)
    return 0;
    - dprintk(KERN_INFO DEVNAME ": key %02x\n", b);
    + dprintk("key %02x\n", b);

    /*
    * NOTE:
    @@ -517,7 +518,7 @@ int bttv_input_init(struct bttv *btv)
    break;
    }
    if (NULL == ir_codes) {
    - dprintk(KERN_INFO "Ooops: IR config error [card=%d]\n", btv->c.type);
    + dprintk("Ooops: IR config error [card=%d]\n", btv->c.type);
    err = -ENODEV;
    goto err_out_free;
    }
    diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c
    index 9b57d09..82cc47d 100644
    --- a/drivers/media/video/bt8xx/bttv-risc.c
    +++ b/drivers/media/video/bt8xx/bttv-risc.c
    @@ -24,6 +24,8 @@

    */

    +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
    +
    #include <linux/module.h>
    #include <linux/init.h>
    #include <linux/slab.h>
    @@ -473,8 +475,7 @@ bttv_set_dma(struct bttv *btv, int override)
    capctl |= (btv->cap_ctl & 0x0c) ? 0x0c : 0x00; /* vbi data */
    capctl |= override;

    - d2printk(KERN_DEBUG
    - "bttv%d: capctl=%x lirq=%d top=%08Lx/%08Lx even=%08Lx/%08Lx\n",
    + d2printk("%d: capctl=%x lirq=%d top=%08llx/%08llx even=%08llx/%08llx\n",
    btv->c.nr,capctl,btv->loop_irq,
    btv->cvbi ? (unsigned long long)btv->cvbi->top.dma : 0,
    btv->curr.top ? (unsigned long long)btv->curr.top->top.dma : 0,
    @@ -517,8 +518,8 @@ bttv_risc_init_main(struct bttv *btv)

    if ((rc = btcx_riscmem_alloc(btv->c.pci,&btv->main,PAGE_SIZE)) < 0)
    return rc;
    - dprintk(KERN_DEBUG "bttv%d: risc main @ %08Lx\n",
    - btv->c.nr,(unsigned long long)btv->main.dma);
    + dprintk("%d: risc main @ %08llx\n",
    + btv->c.nr, (unsigned long long)btv->main.dma);

    btv->main.cpu[0] = cpu_to_le32(BT848_RISC_SYNC | BT848_RISC_RESYNC |
    BT848_FIFO_STATUS_VRE);
    @@ -557,12 +558,12 @@ bttv_risc_hook(struct bttv *btv, int slot, struct btcx_riscmem *risc,
    unsigned long next = btv->main.dma + ((slot+2) << 2);

    if (NULL == risc) {
    - d2printk(KERN_DEBUG "bttv%d: risc=%p slot[%d]=NULL\n",
    - btv->c.nr,risc,slot);
    + d2printk("%d: risc=%p slot[%d]=NULL\n", btv->c.nr, risc, slot);
    btv->main.cpu[slot+1] = cpu_to_le32(next);
    } else {
    - d2printk(KERN_DEBUG "bttv%d: risc=%p slot[%d]=%08Lx irq=%d\n",
    - btv->c.nr,risc,slot,(unsigned long long)risc->dma,irqflags);
    + d2printk("%d: risc=%p slot[%d]=%08llx irq=%d\n",
    + btv->c.nr, risc, slot,
    + (unsigned long long)risc->dma, irqflags);
    cmd = BT848_RISC_JUMP;
    if (irqflags) {
    cmd |= BT848_RISC_IRQ;
    @@ -708,8 +709,7 @@ bttv_buffer_risc(struct bttv *btv, struct bttv_buffer *buf)
    const struct bttv_tvnorm *tvnorm = bttv_tvnorms + buf->tvnorm;
    struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);

    - dprintk(KERN_DEBUG
    - "bttv%d: buffer field: %s format: %s size: %dx%d\n",
    + dprintk("%d: buffer field: %s format: %s size: %dx%d\n",
    btv->c.nr, v4l2_field_names[buf->vb.field],
    buf->fmt->name, buf->vb.width, buf->vb.height);

    @@ -870,10 +870,9 @@ bttv_overlay_risc(struct bttv *btv,
    struct bttv_buffer *buf)
    {
    /* check interleave, bottom+top fields */
    - dprintk(KERN_DEBUG
    - "bttv%d: overlay fields: %s format: %s size: %dx%d\n",
    + dprintk("%d: overlay fields: %s format: %s size: %dx%d\n",
    btv->c.nr, v4l2_field_names[buf->vb.field],
    - fmt->name,ov->w.width,ov->w.height);
    + fmt->name, ov->w.width, ov->w.height);

    /* calculate geometry */
    bttv_calc_geo(btv,&buf->geo,ov->w.width,ov->w.height,
    diff --git a/drivers/media/video/bt8xx/bttv-vbi.c b/drivers/media/video/bt8xx/bttv-vbi.c
    index e79a402..b433267 100644
    --- a/drivers/media/video/bt8xx/bttv-vbi.c
    +++ b/drivers/media/video/bt8xx/bttv-vbi.c
    @@ -23,6 +23,8 @@
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
    */

    +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
    +
    #include <linux/module.h>
    #include <linux/errno.h>
    #include <linux/fs.h>
    @@ -65,8 +67,11 @@ MODULE_PARM_DESC(vbi_debug,"vbi code debug messages, default is 0 (no)");
    #ifdef dprintk
    # undef dprintk
    #endif
    -#define dprintk(fmt, arg...) if (vbi_debug) \
    - printk(KERN_DEBUG "bttv%d/vbi: " fmt, btv->c.nr , ## arg)
    +#define dprintk(fmt, ...) \
    +do { \
    + if (vbi_debug) \
    + pr_debug("%d: " fmt, btv->c.nr, ##__VA_ARGS__); \
    +} while (0)

    #define IMAGE_SIZE(fmt) \
    (((fmt)->count[0] + (fmt)->count[1]) * (fmt)->samples_per_line)
    diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
    index 318edf2..db943a8d 100644
    --- a/drivers/media/video/bt8xx/bttvp.h
    +++ b/drivers/media/video/bt8xx/bttvp.h
    @@ -310,9 +310,21 @@ extern unsigned int bttv_gpio;
    extern void bttv_gpio_tracking(struct bttv *btv, char *comment);
    extern int init_bttv_i2c(struct bttv *btv);

    -#define bttv_printk if (bttv_verbose) printk
    -#define dprintk if (bttv_debug >= 1) printk
    -#define d2printk if (bttv_debug >= 2) printk
    +#define dprintk(fmt, ...) \
    +do { \
    + if (bttv_debug >= 1) \
    + pr_debug(fmt, ##__VA_ARGS__); \
    +} while (0)
    +#define dprintk_cont(fmt, ...) \
    +do { \
    + if (bttv_debug >= 1) \
    + pr_cont(fmt, ##__VA_ARGS__); \
    +} while (0)
    +#define d2printk(fmt, ...) \
    +do { \
    + if (bttv_debug >= 2) \
    + printk(fmt, ##__VA_ARGS__); \
    +} while (0)

    #define BTTV_MAX_FBUF 0x208000
    #define BTTV_TIMEOUT msecs_to_jiffies(500) /* 0.5 seconds */
    --
    1.7.6.405.gc1be0


    \
     
     \ /
      Last update: 2011-08-22 01:01    [W:9.209 / U:0.024 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site