lkml.org 
[lkml]   [2011]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/6] Input: elantech - clean up elantech_init
Op 18-08-11 03:57, JJ Ding schreef:
> Group property setting code into elantech_set_properties.
>
> Signed-off-by: JJ Ding<jj_ding@emc.com.tw>
Looks good.

Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>

Éric
> ---
> drivers/input/mouse/elantech.c | 69 ++++++++++++++++++++++-----------------
> 1 files changed, 39 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
> index 7b9b6e5..ddd40eb 100644
> --- a/drivers/input/mouse/elantech.c
> +++ b/drivers/input/mouse/elantech.c
> @@ -791,6 +791,42 @@ static int elantech_reconnect(struct psmouse *psmouse)
> }
>
> /*
> + * determine hardware version and set some properties according to it.
> + */
> +static void elantech_set_properties(struct elantech_data *etd)
> +{
> + /*
> + * Assume every version greater than 0x020030 is new EeePC style
> + * hardware with 6 byte packets, except 0x020600
> + */
> + if (etd->fw_version< 0x020030 || etd->fw_version == 0x020600)
> + etd->hw_version = 1;
> + else
> + etd->hw_version = 2;
> +
> + /*
> + * Turn on packet checking by default.
> + */
> + etd->paritycheck = 1;
> +
> + /*
> + * This firmware suffers from misreporting coordinates when
> + * a touch action starts causing the mouse cursor or scrolled page
> + * to jump. Enable a workaround.
> + */
> + etd->jumpy_cursor =
> + (etd->fw_version == 0x020022 || etd->fw_version == 0x020600);
> +
> + if (etd->hw_version == 2) {
> + /* For now show extra debug information */
> + etd->debug = 1;
> +
> + if (etd->fw_version>= 0x020800)
> + etd->reports_pressure = true;
> + }
> +}
> +
> +/*
> * Initialize the touchpad and create sysfs entries
> */
> int elantech_init(struct psmouse *psmouse)
> @@ -816,26 +852,9 @@ int elantech_init(struct psmouse *psmouse)
> }
>
> etd->fw_version = (param[0]<< 16) | (param[1]<< 8) | param[2];
> -
> - /*
> - * Assume every version greater than this is new EeePC style
> - * hardware with 6 byte packets
> - */
> - if (etd->fw_version>= 0x020030) {
> - etd->hw_version = 2;
> - /* For now show extra debug information */
> - etd->debug = 1;
> - etd->paritycheck = 1;
> -
> - if (etd->fw_version>= 0x020800)
> - etd->reports_pressure = true;
> -
> - } else {
> - etd->hw_version = 1;
> - etd->paritycheck = 1;
> - }
> -
> - pr_info("assuming hardware version %d, firmware version %d.%d.%d\n",
> + elantech_set_properties(etd);
> + pr_info("assuming hardware version %d "
> + "(with firmware version 0x%02x%02x%02x)\n",
> etd->hw_version, param[0], param[1], param[2]);
>
> if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY,
> @@ -847,16 +866,6 @@ int elantech_init(struct psmouse *psmouse)
> etd->capabilities[0], etd->capabilities[1],
> etd->capabilities[2]);
>
> - /*
> - * This firmware suffers from misreporting coordinates when
> - * a touch action starts causing the mouse cursor or scrolled page
> - * to jump. Enable a workaround.
> - */
> - if (etd->fw_version == 0x020022 || etd->fw_version == 0x020600) {
> - pr_info("firmware version 2.0.34/2.6.0 detected, enabling jumpy cursor workaround\n");
> - etd->jumpy_cursor = true;
> - }
> -
> if (elantech_set_absolute_mode(psmouse)) {
> pr_err("failed to put touchpad into absolute mode.\n");
> goto init_fail;

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2011-08-19 14:31    [W:0.797 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site