lkml.org 
[lkml]   [2011]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] AM3517: Support for MMC1
Date
This patch fixes the following error message which appears
while intializing MMC1 on the AM3517 EVM base-board:
mmc0: host doesn't support card's voltages
mmc0: error -22 whilst initialising SD card
The ocr_mask, which enumerates the volatges supported by the
MMC card was not being indicated before, assuming that a separate
Vcc regulator maybe another controllable regulator driver would be
doing this. This patch statically specifies a subset of the voltages
supported by the MMC driver, which are provided by the current fixed
voltage regulator on AM3517 EVM.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Abhilash K V <abhilash.kv@ti.com>
---
arch/arm/mach-omap2/hsmmc.c | 10 +++++++++-
1 files changed, 9 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index a9b45c7..9dee2e1 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -350,7 +350,15 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
*
* temporary HACK: ocr_mask instead of fixed supply
*/
- mmc->slots[0].ocr_mask = c->ocr_mask;
+ if (cpu_is_omap3505() || cpu_is_omap3517())
+ mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
+ MMC_VDD_26_27 |
+ MMC_VDD_27_28 |
+ MMC_VDD_29_30 |
+ MMC_VDD_30_31 |
+ MMC_VDD_31_32;
+ else
+ mmc->slots[0].ocr_mask = c->ocr_mask;

if (cpu_is_omap3517() || cpu_is_omap3505())
mmc->slots[0].set_power = nop_mmc_set_power;
--
1.7.1


\
 
 \ /
  Last update: 2011-08-19 13:55    [W:0.036 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site