lkml.org 
[lkml]   [2011]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] intel-gtt: fix memory corruption with GM965 and >4GB RAM
Hi Chris,

On Fri, Feb 25, 2011 at 08:22:53PM +0000, Chris Wilson wrote:
> On Fri, 25 Feb 2011 13:30:56 +0100, Jan Niehusmann <jan@gondor.com> wrote:
> > Further investigation revealed that the corrupted address is
> > (dev_priv->status_page_dmah->busaddr & 0xffffffff), ie. the beginning of
> > the hardware status page of the i965 graphics card, cut to 32 bits.
>
> 965GM explicitly supports 36bits of addressing in the PTE. The only
> exception is that general state (part of the 3D engine) must be located in
> the lower 4GiB.

I'm not claiming that 965GM doesn't do 36 bits. In fact I actually see
activity in /sys/kernel/debug/dri/64/i915_gem_hws, and everything seems
to be working well, when the status page is above 4GB - if one ignores
the tiny detail that the wrong memory location gets overwritten,
sometimes...

> Simply ignoring the upper 4bits is the wrong approach and means that the
> PTE then point to random pages, and completely irrelevant to the physical
> address used in the hardware status page address register.

Doesn't setting DMA_BIT_MASK(32) only change the region DMA memory is
allocated from? I made that change just to make sure one gets addresses
which are safe even if the chipset sometimes ignores address bit 32. The
only negative impact I could think of is the allocation may fail if no
appropriate memory is available. Am I wrong?

> I have been considering:

> + if (IS_BRROADWATER(dev) || IS_CRESTLINE(dev))
> + dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(32));

> to prevent hitting the erratum.

So is there a known erratum about these chips? I didn't find errata
documents online, but I only did a short google search and may have
missed them.

> However your bug looks to be:

> - if (INTEL_INFO(dev)->gen >= 4)
> - dev_priv->dma_status_page |= (dev_priv->dma_status_page >> 28) &
> - 0xf0;
> + if (INTEL_INFO(dev)->gen >= 4) /* 36-bit addressing */
> + dev_priv->dma_status_page |=
> + (dev_priv->status_page_dmah->busaddr >> 28) & 0xf0;

Don't think so. dev_priv->dma_status_page gets initialized to
dev_priv->status_page_dmah->busaddr a few lines above, and it's 64 bit,
so that diff doesn't change the result of the computation.

Jan



\
 
 \ /
  Last update: 2011-02-25 22:19    [W:5.759 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site