lkml.org 
[lkml]   [2011]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: at91/net: add macb ethernet controller in 9g45 DT
On 12/03/2011 06:56 AM, Jean-Christophe PLAGNIOL-VILLARD :
> On 18:50 Fri 02 Dec , Nicolas Ferre wrote:
>> Add the Cadence macb ethernet controller in at91sam9g45 .dtsi and
>> enable it in at91sam9m10g45ek board device tree file.
>>
>> Signed-off-by: Nicolas Ferre<nicolas.ferre@atmel.com>
>> ---
>> arch/arm/boot/dts/at91sam9g45.dtsi | 7 +++++++
>> arch/arm/boot/dts/at91sam9m10g45ek.dts | 6 ++++++
>> 2 files changed, 13 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
>> index e89b1d7..67f94d3 100644
>> --- a/arch/arm/boot/dts/at91sam9g45.dtsi
>> +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
>> @@ -101,6 +101,13 @@
>> atmel,use-dma-tx;
>> status = "disabled";
>> };
>> +
>> + macb0: ethernet@fffbc000 {
>> + compatible = "cdns,at32ap7000-macb", "cdns,macb";
>> + reg =<0xfffbc000 0x100>;
>> + interrupts =<25 4>;
> why?

It is the new AIC specification that was reworked in this patch:
https://lkml.org/lkml/2011/12/1/238

>> + status = "disabled";
>> + };
>> };
>> };
>> };
>> diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
>> index 85b34f5..17377a2 100644
>> --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
>> +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
>> @@ -30,6 +30,12 @@
>> usart1: serial@fff90000 {
>> status = "okay";
>> };
>> +
>> + macb0: ethernet@fffbc000 {
>> + local-mac-address = [3a 0e 03 04 05 06];
> please drop this is not supposed to be in the dts but updated for each board

Yes, sure: I kept in because it was allowing me to test. But for sure,
this should go away...

Bye,
--
Nicolas Ferre


\
 
 \ /
  Last update: 2011-12-05 12:43    [W:0.060 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site