lkml.org 
[lkml]   [2011]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 4/4] drm/i915: HDMI hot remove notification to audio driver
On HDMI monitor hot remove, clear SDVO_AUDIO_ENABLE accordingly, so that
the audio driver will receive hot plug events and take action to refresh
its device state and ELD contents.

The cleared SDVO_AUDIO_ENABLE bit needs to be restored to prevent losing
HDMI audio after DPMS on.

CC: Wang Zhenyu <zhenyu.z.wang@intel.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
---
drivers/gpu/drm/i915/intel_dp.c | 4 +++-
drivers/gpu/drm/i915/intel_hdmi.c | 8 ++++++--
2 files changed, 9 insertions(+), 3 deletions(-)

--- linux.orig/drivers/gpu/drm/i915/intel_hdmi.c 2011-11-24 17:11:38.000000000 +0800
+++ linux/drivers/gpu/drm/i915/intel_hdmi.c 2011-11-24 17:15:03.000000000 +0800
@@ -269,6 +269,10 @@ static void intel_hdmi_dpms(struct drm_e
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
u32 temp;
+ u32 enable_bits = SDVO_ENABLE;
+
+ if (intel_hdmi->has_audio)
+ enable_bits |= SDVO_AUDIO_ENABLE;

temp = I915_READ(intel_hdmi->sdvox_reg);

@@ -281,9 +285,9 @@ static void intel_hdmi_dpms(struct drm_e
}

if (mode != DRM_MODE_DPMS_ON) {
- temp &= ~SDVO_ENABLE;
+ temp &= ~enable_bits;
} else {
- temp |= SDVO_ENABLE;
+ temp |= enable_bits;
}

I915_WRITE(intel_hdmi->sdvox_reg, temp);



\
 
 \ /
  Last update: 2011-11-28 08:43    [W:0.107 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site