lkml.org 
[lkml]   [2011]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: iwlagn is getting very shaky
    From
    On Mon, Nov 28, 2011 at 06:23, Norbert Preining <preining@logic.at> wrote:
    > On Mo, 28 Nov 2011, Emmanuel Grumbach wrote:
    >> If the problem is solved, then no :-)
    >
    > I will report back. I have now reverted all the patches and additions
    > by stashing them away, and applied only the last patch send. THe only
    > thing out of default I see is:
    > [ 1074.038324] wlan0: associated
    > [ 1076.157989] Rx A-MPDU request on tid 0 result 0
    > [ 1098.215008] Open BA session requested for 00:24:c4:ab:bd:ef tid 0
    > [ 1098.232249] activated addBA response timer on tid 0
    > [ 1098.232861] switched off addBA timer for tid 0
    > [ 1098.232868] Aggregation is on for tid 0
    > [ 1098.233027] iwlwifi 0000:06:00.0: Tx aggregation enabled on ra = 00:24:c4:ab:bd:ef tid = 0
    > but it seems to work smoothly.
    >
    > I will report more after a few suspend/resume iteations.
    >

    Ok
    It is a bit odd though since these prints seem to point to a
    successful flow, while you were likely to experience a problem in the
    handshake between the AP and your machine. I am basically saying that
    this log is too good, you didn't get into the corner case that we
    didn't handle properly.


    \
     
     \ /
      Last update: 2011-11-28 07:35    [W:3.084 / U:0.184 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site