lkml.org 
[lkml]   [2011]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 15/17] phy_device: Add "port" and "transciever" fields
Date
Some PHYs have multiple software-selectable inputs and outputs,
including RGMII, SGMII, SerDes, etc. New fields are added to the
"struct phy_device" for "port" and "transciever" to allow "ethtool" to
switch outputs at runtime. The defaults for the new fields are
identical to the hardcoded values used previously.

This should make no functional changes to the PHY layer behavior, but
it will allow later PHY/ethernet drivers to override those fields.

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
---
drivers/net/phy/phy.c | 4 ++--
drivers/net/phy/phy_device.c | 2 ++
include/linux/phy.h | 4 ++++
3 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index c378f91..5f72055 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -290,9 +290,9 @@ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)

ethtool_cmd_speed_set(cmd, phydev->speed);
cmd->duplex = phydev->duplex;
- cmd->port = PORT_MII;
+ cmd->port = phydev->port;
cmd->phy_address = phydev->addr;
- cmd->transceiver = XCVR_EXTERNAL;
+ cmd->transceiver = phydev->transciever;
cmd->autoneg = phydev->autoneg;

return 0;
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index fc0f315..d01b272 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -141,6 +141,8 @@ static struct phy_device* phy_device_create(struct mii_bus *bus,

dev->speed = 0;
dev->duplex = -1;
+ dev->port = PORT_MII;
+ dev->transceiver = XCVR_EXTERNAL;
dev->pause = dev->asym_pause = 0;
dev->link = 1;
dev->interface = PHY_INTERFACE_MODE_GMII;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index f07fc1c..0cb300d 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -308,6 +308,10 @@ struct phy_device {
u32 supported;
u32 advertising;

+ /* The current port/xcvr info (Copper, Fibre, MII, Direct-Attach) */
+ u8 port;
+ u8 transceiver;
+
int autoneg;

int link_timeout;
--
1.7.2.5


\
 
 \ /
  Last update: 2011-10-20 23:21    [W:0.135 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site