lkml.org 
[lkml]   [2010]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 10/11] isdn/gigaset: document dial-out number format
From
Date
Add a paragraph to the driver documentation describing how to make
internal and external calls.

Impact: documentation
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
---
Documentation/isdn/README.gigaset | 17 ++++++++++++++++-
1 files changed, 16 insertions(+), 1 deletions(-)

diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset
index e472df8..702c046 100644
--- a/Documentation/isdn/README.gigaset
+++ b/Documentation/isdn/README.gigaset
@@ -263,7 +263,22 @@ GigaSet 307x Device Driver
change its CID mode while the driver is loaded, eg.
echo 0 > /sys/class/tty/ttyGU0/cidmode

-2.7. Unregistered Wireless Devices (M101/M105)
+2.7. Dialing Numbers
+ ---------------
+ The called party number provided by an application for dialing out must
+ be a public network number according to the local dialing plan, without
+ any dial prefix for getting an outside line.
+
+ Internal calls can be made by providing an internal extension number
+ prefixed with "**" (two asterisks) as the called party number. So to dial
+ eg. the first registered DECT handset, give "**11" as the called party
+ number. Dialing "***" (three asterisks) calls all extensions
+ simultaneously (global call).
+
+ This holds for both CAPI 2.0 and ISDN4Linux applications. Unimodem mode
+ does not support internal calls.
+
+2.8. Unregistered Wireless Devices (M101/M105)
-----------------------------------------
The main purpose of the ser_gigaset and usb_gigaset drivers is to allow
the M101 and M105 wireless devices to be used as ISDN devices for ISDN
--
1.6.5.3.298.g39add


\
 
 \ /
  Last update: 2010-07-06 02:23    [W:0.300 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site