This message generated a parse failure. Raw output follows here. Please use 'back' to navigate. From devnull@lkml.org Tue Jun 11 07:16:41 2024 Delivery-date: Tue, 27 Apr 2010 13:03:23 +0200 Received: from sm-d311v.smileserver.ne.jp ([203.211.202.206]:14602 "EHLO sm-d311v.smileserver.ne.jp" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754370Ab0D0LCM (ORCPT ); Tue, 27 Apr 2010 07:02:12 -0400 X-Virus-Status: clean(F-Secure/virusgw_smtp/303/viruscheck2-01.private.hosting-pf.net) Received: from tsmail03 (unknown [122.210.32.228]) by sm-d311v.smileserver.ne.jp (mail) with SMTP id 964CA96D87; Tue, 27 Apr 2010 20:02:10 +0900 (JST) Message-Id: <002001cae5f9$159627e0$66f8800a@maildom.okisemi.com> From: "Masayuki Ohtake" To: "LKML" Cc: "Wang, Yong Y" , "Wang, Qi" , "Intel OTC" , "Andrew" Subject: [PATCH] Topcliff DMA: Add the DMA driver [1/4] Mime-Version: 1.0 Date: Tue, 27 Apr 2010 20:01:44 +0900 Content-Type: message/partial; total=4; id="01CAE5F9.14BABC00@tsmail03"; number=1 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1983 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1983 X-Hosting-Pf: 0 X-NAI-Spam-Score: 1 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-Id: X-Mailing-List: linux-kernel@vger.kernel.org From: "Masayuki Ohtake" To: "LKML" Cc: "Wang, Yong Y" , "Wang, Qi" , "Intel OTC" , "Andrew" Subject: [PATCH] Topcliff DMA: Add the DMA driver Date: Tue, 27 Apr 2010 20:01:44 +0900 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-2022-jp" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1983 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1983 From: Masayuki Ohtake This driver implements DMA controls for Topcliff. Signed-off-by: Masayuki Ohtake --- drivers/dma/Kconfig | drivers/dma/Makefile | drivers/dma/pch_dma/Makefile | drivers/dma/pch_dma/pch_common.h | drivers/dma/pch_dma/pch_debug.h | drivers/dma/pch_dma/pch_dma_hal.c | drivers/dma/pch_dma/pch_dma_hal.h | drivers/dma/pch_dma/pch_dma_main.c | drivers/dma/pch_dma/pch_dma_main.h | drivers/dma/pch_dma/pch_dma_pci.c | drivers/dma/pch_dma/pch_dma_pci.h | +++++++++++++++++++++++++++++++ 11 files changed, zz insertions(+) diff -urN linux-2.6.33.1/drivers/dma/Kconfig topcliff-2.6.33.1/drivers/dma/Kconfig --- linux-2.6.33.1/drivers/dma/Kconfig 2010-03-16 01:09:39.000000000 +0900 +++ topcliff-2.6.33.1/drivers/dma/Kconfig 2010-03-23 10:40:05.000000000 +0900 @@ -20,6 +20,14 @@ config ASYNC_TX_DISABLE_CHANNEL_SWITCH bool +config PCH_UART_DMA + tristate "PCH DMA Controller" + depends on PCI && SERIAL_8250_PCH_DMA + default y + help + This value must equal to SERIAL_8250_PCH. This config PCH_UART_DMA is + referred by PCH UART. + config INTEL_IOATDMA tristate "Intel I/OAT DMA support" depends on PCI && X86 diff -urN linux-2.6.33.1/drivers/dma/Makefile topcliff-2.6.33.1/drivers/dma/Makefile --- linux-2.6.33.1/drivers/dma/Makefile 2010-03-16 01:09:39.000000000 +0900 +++ topcliff-2.6.33.1/drivers/dma/Makefile 2010-03-23 10:40:05.000000000 +0900 @@ -12,3 +12,4 @@ obj-$(CONFIG_SH_DMAE) += shdma.o obj-$(CONFIG_COH901318) += coh901318.o coh901318_lli.o obj-$(CONFIG_AMCC_PPC440SPE_ADMA) += ppc4xx/ +obj-$(CONFIG_PCH_UART_DMA) += pch_dma/ diff -urN linux-2.6.33.1/drivers/dma/pch_dma/Makefile topcliff-2.6.33.1/drivers/dma/pch_dma/Makefile --- linux-2.6.33.1/drivers/dma/pch_dma/Makefile 1970-01-01 09:00:00.000000000 +0900 +++ topcliff-2.6.33.1/drivers/dma/pch_dma/Makefile 2010-03-23 10:40:05.000000000 +0900 @@ -0,0 +1,5 @@ +#enable for debug;this can be added in Kconfig +#EXTRA_CFLAGS += -DDEBUG + +obj-$(CONFIG_PCH_UART_DMA) += pch_dma.o +pch_dma-objs := pch_dma_pci.o pch_dma_hal.o pch_dma_main.o diff -urN linux-2.6.33.1/drivers/dma/pch_dma/pch_common.h topcliff-2.6.33.1/drivers/dma/pch_dma/pch_common.h --- linux-2.6.33.1/drivers/dma/pch_dma/pch_common.h 1970-01-01 09:00:00.000000000 +0900 +++ topcliff-2.6.33.1/drivers/dma/pch_dma/pch_common.h 2010-04-27 11:46:20.000000000 +0900 @@ -0,0 +1,144 @@ +/*! + * @file pch_common.h + * @brief Provides the macro definitions used by all files. + * @version 1.0.0.0 + * @section + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + * History: + * Copyright (C) 2008 OKI SEMICONDUCTOR Co., LTD. + * + * + * created: + * OKISEMI 04/14/2010 + * + */ + +#ifndef __PCH_COMMON_H__ +#define __PCH_COMMON_H__ + +/*! @ingroup Global +@def PCH_WRITE8 +@brief Macro for writing 8 bit data to an io/mem address +*/ +#define PCH_WRITE8(val, addr) iowrite8((val), (void __iomem *)(addr)) +/*! @ingroup Global +@def PCH_LOG +@brief Macro for writing 16 bit data to an io/mem address +*/ +#define PCH_WRITE16(val, addr) iowrite16((val), (void __iomem *)(addr)) +/*! @ingroup Global +@def PCH_LOG +@brief Macro for writing 32 bit data to an io/mem address +*/ +#define PCH_WRITE32(val, addr) iowrite32((val), (void __iomem *)(addr)) + +/*! @ingroup Global +@def PCH_READ8 +@brief Macro for reading 8 bit data from an io/mem address +*/ +#define PCH_READ8(addr) ioread8((void __iomem *)(addr)) +/*! @ingroup Global +@def PCH_READ16 +@brief Macro for reading 16 bit data from an io/mem address +*/ +#define PCH_READ16(addr) ioread16((void __iomem *)(addr)) +/*! @ingroup Global +@def PCH_READ32 +@brief Macro for reading 32 bit data from an io/mem address +*/ +#define PCH_READ32(addr) ioread32((void __iomem *)(addr)) +/*! @ingroup Global +@def PCH_WRITE32_F +@brief Macro for writing 32 bit data to an io/mem address +*/ +#define PCH_WRITE32_F(val, addr) do \ + { PCH_WRITE32((val), (addr)); (void)PCH_READ32((addr)); } while (0); + +/*! @ingroup Global +@def PCH_WRITE_BYTE +@brief Macro for writing 1 byte data to an io/mem address +*/ +#define PCH_WRITE_BYTE PCH_WRITE8 +/*! @ingroup Global +@def PCH_WRITE_WORD +@brief Macro for writing 1 word data to an io/mem address +*/ +#define PCH_WRITE_WORD PCH_WRITE16 +/*! @ingroup Global +@def PCH_WRITE_LONG +@brief Macro for writing long data to an io/mem address +*/ +#define PCH_WRITE_LONG PCH_WRITE32 + +/*! @ingroup Global +@def PCH_READ_BYTE +@brief Macro for reading 1 byte data from an io/mem address +*/ +#define PCH_READ_BYTE PCH_READ8 +/*! @ingroup Global +@def PCH_READ_WORD +@brief Macro for reading 1 word data from an io/mem address +*/ +#define PCH_READ_WORD PCH_READ16 +/*! @ingroup Global +@def PCH_READ_LONG +@brief Macro for reading long data from an io/mem address +*/ +#define PCH_READ_LONG PCH_READ32 + +/* Bit Manipulation Macros */ + +/*! @ingroup Global +@def PCH_READ_LONG +@brief macro to set a specified bit(mask) at the + specified address +*/ +#define PCH_SET_ADDR_BIT(addr, bitmask) PCH_WRITE_LONG((PCH_READ_LONG(addr) |\ + (bitmask)), (addr)) + +/*! @ingroup Global +@def PCH_READ_LONG +@brief macro to clear a specified bit(mask) at the specified address +*/ +#define PCH_CLR_ADDR_BIT(addr, bitmask) PCH_WRITE_LONG((PCH_READ_LONG(addr) &\ + ~(bitmask)), (addr)) + +/*! @ingroup Global +@def PCH_READ_LONG +@brief macro to set a specified bitmask for a variable +*/ +#define PCH_SET_BITMSK(var, bitmask) ((var) |= (bitmask)) + +/*! @ingroup Global +@def PCH_READ_LONG +@brief macro to clear a specified bitmask for a variable +*/ +#define PCH_CLR_BITMSK(var, bitmask) ((var) &= (~(bitmask))) + +/*! @ingroup Global +@def PCH_READ_LONG +@brief macro to set a specified bit for a variable +*/ +#define PCH_SET_BIT(var, bit) ((var) |= (1<<(bit))) + +/*! @ingroup Global +@def PCH_READ_LONG +@brief macro to clear a specified bit for a variable +*/ +#define PCH_CLR_BIT(var, bit) ((var) &= ~(1<<(bit))) + +#endif diff -urN linux-2.6.33.1/drivers/dma/pch_dma/pch_debug.h topcliff-2.6.33.1/drivers/dma/pch_dma/pch_debug.h --- linux-2.6.33.1/drivers/dma/pch_dma/pch_debug.h 1970-01-01 09:00:00.000000000 +0900 +++ topcliff-2.6.33.1/drivers/dma/pch_dma/pch_debug.h 2010-04-27 11:46:20.000000000 +0900 @@ -0,0 +1,58 @@ +/*! + * @file pch_debug.h + * @brief Provides the macro definitions used for debugging. + * @version 1.0.0.0 + * @section + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + * History: + * Copyright (C) 2008 OKI SEMICONDUCTOR Co., LTD. + * + * + * created: + * OKISEMI 04/14/2010 + * + */ + +#ifndef __PCH_DEBUG_H__ +#define __PCH_DEBUG_H__ + +#ifdef MODULE +#define PCH_LOG(level, fmt, args...) printk(level "%s:" fmt "\n",\ + THIS_MODULE->name, ##args) +#else +#define PCH_LOG(level, fmt, args...) printk(level "%s:" fmt "\n" ,\ + __FILE__, ##args) +#endif + + +#ifdef DEBUG + #define PCH_DEBUG(fmt, args...) PCH_LOG(KERN_DEBUG, fmt, ##args) +#else + #define PCH_DEBUG(fmt, args...) +#endif + +#ifdef PCH_TRACE_ENABLED + #define PCH_TRACE PCH_DEBUG +#else + #define PCH_TRACE(fmt, args...) +#endif + +#define PCH_TRACE_ENTER PCH_TRACE("Enter %s", __func__) +#define PCH_TRACE_EXIT PCH_TRACE("Exit %s", __func__) + + +#endif diff -urN linux-2.6.33.1/drivers/dma/pch_dma/pch_dma_hal.c topcliff-2.6.33.1/drivers/dma/pch_dma/pch_dma_hal.c --- linux-2.6.33.1/drivers/dma/pch_dma/pch_dma_hal.c 1970-01-01 09:00:00.000000000 +0900 +++ topcliff-2.6.33.1/drivers/dma/pch_dma/pch_dma_hal.c 2010-04-27 11:46:20.000000000 +0900 @@ -0,0 +1,1201 @@ +/** + * @file pch_dma_hal.c + * + * @brief + * This file defines the PCH_DMA_CONTROLLER HAL API functions. + * + * @version 0.90 + * @section + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + *
+ */ + +/* + * History: + * Copyright (C) 2008 OKI SEMICONDUCTOR Co., LTD. + * + * + * created: + * OKISEMI 04/14/2010 + * + */ + +#include +#include +#include +#include + +#include "pch_common.h" +#include "pch_debug.h" +#include "pch_dma_hal.h" + +/*! @ingroup HALLayer + @def PCH_DMA_BIT_SET + @brief Macro for setting selected bits of a register. + @remarks This macro is used to set the selected bits + at a given 32 bit location. Normally it is + used to set the bits of given register. +*/ +#define PCH_DMA_BIT_SET(reg, bitmask) \ + PCH_WRITE_LONG(((PCH_READ_LONG((reg)) | bitmask)), (reg)) + +/*! @ingroup HALLayer + @def PCH_DMA_BIT_CLEAR + @brief Macro for re-setting selected bits of a register. + @remarks This macro is used to reset the selected bits + at a given 32 bit location. Normally it is + used to reset the bits of given register. +*/ +#define PCH_DMA_BIT_CLEAR(regAddr, bitMask) \ + PCH_WRITE_LONG((PCH_READ_LONG((regAddr)) & (~(bitMask))), \ + (regAddr)) + +/*! @ingroup HALLayer + @def DEFAULT_CONTROL_REGISTER_VALUE + @brief Macro for setting selected bits of control register. + @remarks This macro is used to set the mode and direction + bit of the control register of a specific + channel without affecting the settings of other + channels. +*/ +#define DEFAULT_CONTROL_REGISTER_VALUE (0x33333333) + +/*! @ingroup HALLayer + @def dma_clear_interrupt_status + @brief Macro for clearing the interrupt status of the + DMA. + @remarks This macro is used to clear the interrupt status + bits of the DMA during handling of interrupts. +*/ +#define dma_clear_interrupt_status(addr, stat0, stat2) \ +do { \ + PCH_WRITE_LONG((stat0), ((addr) + DMA_STS0_OFFSET)); \ + PCH_WRITE_LONG((stat2), ((addr) + DMA_STS2_OFFSET)); \ +} while (0) + +/*! @ingroup HALLayer + @def dma_get_interrupt_status + @brief Macro for getting the interrupt status of a + specific channel + @remarks This macro is used to get the interrupt status + of the DMA during handling of interrupts. +*/ +#define dma_get_interrupt_status(ch, stat0, stat2) \ +( \ + ((ch) < 8) ? \ + (((stat0) & (DMA_INTERRUPT_OCCUR << ch)) != 0) \ + : \ + (((stat2) & (DMA_INTERRUPT_OCCUR << (ch - 8))) != 0) \ +) + +/*! @ingroup HALLayer + @def dma_get_abort_status + @brief Macro for getting the abort status of a specific + channel. + @remarks This macro is used to get the abort status + of the DMA during handling of interrupts. +*/ +#define dma_get_abort_status(ch, stat0, stat2) \ +( \ + ((ch) < 8) ? \ + (((stat0) & (DMA_ABORT_OCCUR << ch)) != 0) \ + : \ + (((stat2) & (DMA_ABORT_OCCUR << (ch - 8))) != 0) \ +) + +/* Global Varibles */ +/*! @ingroup Global + @var pch_dma_channel_info + @brief Retains the specific channel information. +*/ +struct pch_dma_controller_info pch_dma_channel_info[PCH_DMA_CHANNELS_MAX]; + +/* Channel Allocation Table for DMA */ +/*! @ingroup Global + @var pch_dma_channel_table + @brief Retains the specific channel allocation + information. +*/ +struct pch_dma_channel_alloc_table pch_dma_channel_table[PCH_DMA_CHANNELS_MAX] += { + /* 4 channel DMA device0 (Reserved for GE.) */ + {PCH_DMA_4CH0, PCH_DMA_TX_DATA_REQ0, PCI_DEVICE_ID_PCH_SPI, 0, 0, 0, 0}, + {PCH_DMA_4CH0, PCH_DMA_RX_DATA_REQ0, PCI_DEVICE_ID_PCH_SPI, 1, 0, 0, 0}, + {PCH_DMA_4CH0, 0, 0, 2, 0, 0, 0}, + {PCH_DMA_4CH0, 0, 0, 3, 0, 0, 0}, + + /* 4 channel DMA device1 (Not reserved.) */ + {PCH_DMA_4CH1, 0, 0, 0, 0, 0, 0}, + {PCH_DMA_4CH1, 0, 0, 1, 0, 0, 0}, + {PCH_DMA_4CH1, 0, 0, 2, 0, 0, 0}, + {PCH_DMA_4CH1, 0, 0, 3, 0, 0, 0}, + + /* 4 channel DMA device2 (Not reserved.) */ + {PCH_DMA_4CH2, 0, 0, 0, 0, 0, 0}, + {PCH_DMA_4CH2, 0, 0, 1, 0, 0, 0}, + {PCH_DMA_4CH2, 0, 0, 2, 0, 0, 0}, + {PCH_DMA_4CH2, 0, 0, 3, 0, 0, 0}, + + /* 4 channel DMA device3 (Not reserved.) */ + {PCH_DMA_4CH3, 0, 0, 0, 0, 0, 0}, + {PCH_DMA_4CH3, 0, 0, 1, 0, 0, 0}, + {PCH_DMA_4CH3, 0, 0, 2, 0, 0, 0}, + {PCH_DMA_4CH3, 0, 0, 3, 0, 0, 0}, + + /* 4 channel DMA device4 (Not reserved.) */ + {PCH_DMA_4CH4, 0, 0, 0, 0, 0, 0}, + {PCH_DMA_4CH4, 0, 0, 1, 0, 0, 0}, + {PCH_DMA_4CH4, 0, 0, 2, 0, 0, 0}, + {PCH_DMA_4CH4, 0, 0, 3, 0, 0, 0}, + + /* 8 channel DMA device0 (Reserved for GE.) */ + {PCH_DMA_8CH0, PCH_DMA_TX_DATA_REQ0, PCI_DEVICE_ID_PCH_UART0, 0, 0, 0, + 0}, + {PCH_DMA_8CH0, PCH_DMA_RX_DATA_REQ0, PCI_DEVICE_ID_PCH_UART0, 1, 0, 0, + 0}, + {PCH_DMA_8CH0, PCH_DMA_TX_DATA_REQ0, PCI_DEVICE_ID_PCH_UART1, 2, 0, 0, + 0}, + {PCH_DMA_8CH0, PCH_DMA_RX_DATA_REQ0, PCI_DEVICE_ID_PCH_UART1, 3, 0, 0, + 0}, + {PCH_DMA_8CH0, PCH_DMA_TX_DATA_REQ0, PCI_DEVICE_ID_PCH_UART2, 4, 0, 0, + 0}, + {PCH_DMA_8CH0, PCH_DMA_RX_DATA_REQ0, PCI_DEVICE_ID_PCH_UART2, 5, 0, 0, + 0}, + {PCH_DMA_8CH0, PCH_DMA_TX_DATA_REQ0, PCI_DEVICE_ID_PCH_UART3, 6, 0, 0, + 0}, + {PCH_DMA_8CH0, PCH_DMA_RX_DATA_REQ0, PCI_DEVICE_ID_PCH_UART3, 7, 0, 0, + 0}, + + /* 8 channel DMA device1 */ + {PCH_DMA_8CH1, 0, 0, 0, 0, 0, 0}, + {PCH_DMA_8CH1, 0, 0, 1, 0, 0, 0}, + {PCH_DMA_8CH1, 0, 0, 2, 0, 0, 0}, + {PCH_DMA_8CH1, 0, 0, 3, 0, 0, 0}, + {PCH_DMA_8CH1, 0, 0, 4, 0, 0, 0}, + {PCH_DMA_8CH1, 0, 0, 5, 0, 0, 0}, + {PCH_DMA_8CH1, 0, 0, 6, 0, 0, 0}, + {PCH_DMA_8CH1, 0, 0, 7, 0, 0, 0}, + + /* 8 channel DMA device2 */ + {PCH_DMA_8CH2, 0, 0, 0, 0, 0, 0}, + {PCH_DMA_8CH2, 0, 0, 1, 0, 0, 0}, + {PCH_DMA_8CH2, 0, 0, 2, 0, 0, 0}, + {PCH_DMA_8CH2, 0, 0, 3, 0, 0, 0}, + {PCH_DMA_8CH2, 0, 0, 4, 0, 0, 0}, + {PCH_DMA_8CH2, 0, 0, 5, 0, 0, 0}, + {PCH_DMA_8CH2, 0, 0, 6, 0, 0, 0}, + {PCH_DMA_8CH2, 0, 0, 7, 0, 0, 0}, + + /* 8 channel DMA device3 (Doubts in allocating.) */ + {PCH_DMA_8CH3, 0, 0, 0, 0, 0, 0}, + {PCH_DMA_8CH3, 0, 0, 1, 0, 0, 0}, + {PCH_DMA_8CH3, 0, 0, 2, 0, 0, 0}, + {PCH_DMA_8CH3, 0, 0, 3, 0, 0, 0}, + {PCH_DMA_8CH3, 0, 0, 4, 0, 0, 0}, + {PCH_DMA_8CH3, 0, 0, 5, 0, 0, 0}, + {PCH_DMA_8CH3, 0, 0, 6, 0, 0, 0}, + {PCH_DMA_8CH3, 0, 0, 7, 0, 0, 0}, + + /* 12 channel DMA device0 */ + {PCH_DMA_12CH0, 0, 0, 0, 0, 0, 0}, + {PCH_DMA_12CH0, 0, 0, 1, 0, 0, 0}, + {PCH_DMA_12CH0, 0, 0, 2, 0, 0, 0}, + {PCH_DMA_12CH0, 0, 0, 3, 0, 0, 0}, + {PCH_DMA_12CH0, 0, 0, 4, 0, 0, 0}, + {PCH_DMA_12CH0, 0, 0, 5, 0, 0, 0}, + {PCH_DMA_12CH0, 0, 0, 6, 0, 0, 0}, + {PCH_DMA_12CH0, 0, 0, 7, 0, 0, 0}, + {PCH_DMA_12CH0, 0, 0, 8, 0, 0, 0}, + {PCH_DMA_12CH0, 0, 0, 9, 0, 0, 0}, + {PCH_DMA_12CH0, 0, 0, 10, 0, 0, 0}, + {PCH_DMA_12CH0, 0, 0, 11, 0, 0, 0} +}; + +/* Function Definitions */ + +/*! @ingroup HALLayerAPI + @fn void __init dma_init(u32 base, u32 dev_type) + @brief Initializes local data structures for the DMAC device. + @remarks This function is called when a DMA device is detected. + It initializes the data structures associated + with the obtained device. The main tasks + performed by this function are: + - Waits until the status of a DMA channel + becomes idle and then disables it. + - Initializes the data structures that can + be used further. + + @param base [@ref IN] The base address. + @param dev_type [@ref IN] The type of the device. + + @return None. + + @see + - pch_dma_probe + */ + +void __init dma_init(u32 base, u32 dev_type) +{ + int i; + u32 counter; + u16 DMAStatus; + + for (i = 0; i < PCH_DMA_CHANNELS_MAX; i++) { + if (pch_dma_channel_table[i].dma_dev_id == dev_type) { + counter = COUNTER_LIMIT; + + pch_dma_channel_table[i].ch_found = 1; + pch_dma_channel_table[i].ch_alloced = 0; + pch_dma_channel_table[i].base = base; + + do { + get_dma_status(i, &DMAStatus); + } while ((counter--) && (DMAStatus != DMA_STATUS_IDLE)); + + (void)dma_disable_ch(i); + PCH_DEBUG("dma_init -> Channel %d disabled.\n", i); + + (void)dma_enable_disable_interrupt + (i, PCH_DMA_INTERRUPT_DISABLE); + PCH_DEBUG + ("dma_init -> Interrupt disabled for channel %d.\n", + i); + } + } + + PCH_DEBUG("Function dma_init invoked successfully.\n"); +} + +/*! @ingroup HALLayerAPI + @fn void dma_exit(u32 dev_type) + @brief De-initializes the DMA device. + @remarks The main tasks performed by this function are: + - Waits for a small interval for each channel + if the channel is not idle so that it can + complete its transfer. + - Disables the channel. + - Disables the concerned interrupt. + + @param dev_type [@ref IN] The type of the device. + + @return None + + @see + - pch_dma_remove + - pch_dma_suspend +*/ +void dma_exit(u32 dev_type) +{ + int i; + u32 counter; + u16 DMAStatus; + + for (i = 0; i < PCH_DMA_CHANNELS_MAX; i++) { + if (pch_dma_channel_table[i].dma_dev_id == dev_type && + pch_dma_channel_table[i].ch_found == 1) { + counter = COUNTER_LIMIT; + get_dma_status(i, &DMAStatus); + + while ((counter > 0) && + (DMAStatus != DMA_STATUS_IDLE)) { + counter--; + get_dma_status(i, &DMAStatus); + } + + (void)dma_disable_ch(i); + PCH_DEBUG("dma_exit -> Channel %d disabled.\n", i); + + (void)dma_enable_disable_interrupt + (i, PCH_DMA_INTERRUPT_DISABLE); + PCH_DEBUG("dma_exit -> Interrupt disabled for channel " + "%d.\n", i); + } + } + + PCH_DEBUG("Function dma_exit invoked successfully.\n"); +} + +/*! @ingroup HALLayerAPI + @fn int dma_set_mode(int channel, + struct pch_dma_mode_param stModeParam) + @brief Sets the Mode of transfer for DMA. + @remarks Does the setting of direction of transfer, access size + type and transfer mode. This function does not + perform any register write. The main tasks + performed by this function are: + - Set the DMATransferDirection field of @ref + pch_dma_channel_info with the direction of + transfer specified. + - Set the DMAAccessSize field of @ref + pch_dma_channel_info with the Access Size Type + specified. + - Set the DMATransferMode field of @ref + pch_dma_channel_info structure with the DMA mode + specified. + + @param channel [@ref IN] The channel for which mode is to be set. + @param stModeParam [@ref IN] Structure which contains the + parameters for the setting of Mode. + + @return int + - @ref PCH_DMA_SUCCESS --> On success. + + @see + - pch_set_dma_mode + */ +int dma_set_mode(int channel, struct pch_dma_mode_param stModeParam) +{ + pch_dma_channel_info[channel].DMAAccessSize = stModeParam.DMASizeType; + pch_dma_channel_info[channel].DMATransferMode = + stModeParam.DMATransferMode; + pch_dma_channel_info[channel].DMATransferDirection = + stModeParam.TransferDirection; + + PCH_DEBUG("Function dma_set_mode returns %d.\n", PCH_DMA_SUCCESS); + return PCH_DMA_SUCCESS; +} + +/*! @ingroup HALLayerAPI + @fn int dma_set_addr(int channel, u32 iaddr, u32 oaddr) + @brief Sets the Inside and Outside address in the case + of ONE SHOT MODE + @remarks This function updates Inside address and outside + address to be set in ONE SHOT mode. The main + tasks performed by this function are: + - Set the field in_addr of the @ref + pch_dma_channel_info structure of the + corresponding channel to the value of the + argument iaddr. + - Set the field out_addr of the @ref + pch_dma_channle_info structure of the + corresponding channel to the value of the + argument oaddr. + + @param channel [@ref IN] Channel for which addresses is + to be set. + @param iaddr [@ref IN] Inside address to be set + @param oaddr [@ref IN] Outside address to be set + + @return int + - @ref PCH_DMA_SUCCESS --> On Success. + + @see + - pch_set_dma_addr + + */ +int dma_set_addr(int channel, u32 iaddr, u32 oaddr) +{ + pch_dma_channel_info[channel].in_addr = iaddr; + pch_dma_channel_info[channel].out_addr = oaddr; + + PCH_DEBUG("Function dma_set_addr returns %d.\n", PCH_DMA_SUCCESS); + return PCH_DMA_SUCCESS; +} + +/*! @ingroup HALLayerAPI + @fn int dma_enable_ch(int channel) + @brief Enables the DMA channel specified. + @remarks This function sets the entire DMA settings such as + the transfer direction, transfer mode and + enables the channel. The main tasks performed by + this function are: + - Sets the transfer direction. + - Sets the transfer mode. + - Enabling the channel. + + @param channel [@ref IN] Channel number that + is to be enabled. + + @return int + - @ref PCH_DMA_SUCCESS --> On success. + + @see + - pch_enable_dma + */ +int dma_enable_ch(int channel) +{ + u32 base_address; + u16 transfer_mode; + u32 ctl0; + u32 ctrl_val = DEFAULT_CONTROL_REGISTER_VALUE; + int ch; + + /* Marking the channel as enabled. */ + pch_dma_channel_info[channel].bChEnabled = 1; + + ch = pch_dma_channel_table[channel].channel; + base_address = pch_dma_channel_table[channel].base; + + ctl0 = 0; + + /* Setting of transfer direction. */ + if (pch_dma_channel_info[channel].DMATransferDirection == + PCH_DMA_DIR_OUT_TO_IN) { + ctl0 |= PCH_DMA_DIR_OUT_TO_IN; + } + + /* Setting the transfer mode features. */ + transfer_mode = pch_dma_channel_info[channel].DMATransferMode; + + /* If scatter gather mode. */ + if (transfer_mode == DMA_SCATTER_GATHER_MODE) { + u32 next_desc; + + next_desc = ((u32) pch_dma_channel_info[channel].pHeadOfList); + PCH_WRITE_LONG(next_desc, (base_address + (DMA_NX_AD_OFFSET + + (ch * 0x10)))); + + ctl0 |= DMA_SCATTER_GATHER_MODE; + } + /* If one shot mode. */ + else { + u32 in_address = pch_dma_channel_info[channel].in_addr; + u32 out_address = pch_dma_channel_info[channel].out_addr; + u32 access_size = pch_dma_channel_info[channel].DMAAccessSize; + u32 count = pch_dma_channel_info[channel].DMATransferSize; + + ctl0 |= DMA_ONE_SHOT_MODE; + + count |= access_size; + + PCH_WRITE_LONG(in_address, + (base_address + + (DMA_IN_AD_OFFSET + (ch * 0x10)))); + PCH_WRITE_LONG(out_address, + (base_address + + (DMA_OUT_AD_OFFSET + (ch * 0x10)))); + PCH_WRITE_LONG(count, + (base_address + (DMA_SZ_OFFSET + (ch * 0x10)))); + } + + /* Enabling the interrupts. */ + (void)dma_enable_disable_interrupt(channel, PCH_DMA_INTERRUPT_ENABLE); + + /* Updating Control register. */ + if (ch < 8) { + /* Clearing the three bits corresponding + to the mode and transfer direction of + specific channel. + */ + ctrl_val &= ~((MSK_ALL_THREE) << (ch * DMA_SHIFT_MODE_BITS)); + + /* Setting the transfer mode and direction. */ + ctrl_val |= (ctl0 << (ch * DMA_SHIFT_MODE_BITS)); + + /* Updating to the register. */ + PCH_WRITE_LONG(ctrl_val, (base_address + DMA_CTL0_OFFSET)); + + PCH_DEBUG("dma_enable -> Control register(0) value: " + "%x.\n", + PCH_READ_LONG((base_address + DMA_CTL0_OFFSET))); + } else { + /* Clearing the three bits corresponding + to the mode and transfer direction of + specific channel. + */ + ctrl_val &= + ~((MSK_ALL_THREE) << ((ch - 8) * DMA_SHIFT_MODE_BITS)); + + /* Setting the transfer mode and direction. */ + ctrl_val |= (ctl0 << ((ch - 8) * DMA_SHIFT_MODE_BITS)); + + /* Updating to the register. */ + PCH_WRITE_LONG(ctrl_val, (base_address + DMA_CTL3_OFFSET)); + + PCH_DEBUG("dma_enable -> Control register(3) value: " + "%x.\n", + PCH_READ_LONG((base_address + DMA_CTL3_OFFSET))); + } + + PCH_DEBUG("Function dma_enable_ch returns %d.\n", PCH_DMA_SUCCESS); + return PCH_DMA_SUCCESS; +} + +/*! @ingroup HALLayerAPI + @fn int dma_disable_ch(int channel) + @brief Disables the DMA channel specified. + @remarks This function performs the necessary + register updation in-order to disable + the DMA channel. + + @param channel [@ref IN] Channel to be disabled. + + @return int + - @ref PCH_DMA_SUCCESS + + @see + - pch_disable_dma + */ +int dma_disable_ch(int channel) +{ + u32 base_address; + u16 ch; + + ch = pch_dma_channel_table[channel].channel; + base_address = pch_dma_channel_table[channel].base; + + if (channel < 8) { + /* Clearing the mode bits of the channel */ + PCH_DMA_BIT_CLEAR((base_address + DMA_CTL0_OFFSET), + (DMA_MASK_MODE_BITS << + (ch * DMA_SHIFT_MODE_BITS))); + } else { + /* Clearing the mode bits of the channel */ + PCH_DMA_BIT_CLEAR((base_address + DMA_CTL3_OFFSET), + (DMA_MASK_MODE_BITS << + ((ch - 8) * DMA_SHIFT_MODE_BITS))); + } + + /* Updating the enable variable. */ + pch_dma_channel_info[channel].bChEnabled = (u16) 0; + + PCH_DEBUG("Function dma_disable_ch returns " "%d.\n", PCH_DMA_SUCCESS); + return PCH_DMA_SUCCESS; +} + +/*! @ingroup HALLayerAPI + @fn int dma_set_count (int channel, u32 count) + @brief Sets the count value . + @remarks Updates the transfer size for ONE_SHOT_MODE + of DMA Transfer. The main tasks performed by + this function are: + - Set the DMATransferSize field of the + @ref pch_dma_channel_info structure to the + value of the argument count. + + @param channel [@ref IN] Channel number for + which value is to be set + @param count [@ref IN] Transfer Size value. + + @return int + - @ref PCH_DMA_SUCCESS + + @see + - pch_set_dma_count + */ +int dma_set_count(int channel, u32 count) +{ + pch_dma_channel_info[channel].DMATransferSize = count; + + PCH_DEBUG("Function dma_set_count returns %d.\n", PCH_DMA_SUCCESS); + return PCH_DMA_SUCCESS; +} + +/*! @ingroup HALLayerAPI + @fn int dma_add_desc(int channel, + struct pch_dma_desc *start, + struct pch_dma_desc *end) + @brief Adds descriptors to the existing list of descriptors. + @remarks This function accepts the descriptor list and appends + it to the existing list of descriptors. The main + tasks performed by this function are: + - Obtains the virtual address of the end of the + currently set descriptor list. If it is not + successful returns with an error. + - Appends the value of the argument start to the + nextDesc field of the descriptor pointed by the + pTailOfList field of the + @ref pch_dma_channel_info structure with the + value of the argument start after appropriately + setting the last two bits to denote + Follow_Next_Descriptor_Without_Interrupt. + - Updates the value of the argument end to the + pTailOfList field of the @ref + pch_dma_channel_info structure for the + corresponding channel. + + @param channel [@ref IN] Channel number. + @param start [@ref IN] Reference to first + descriptor of list. + @param end [@ref IN] Reference to last + descriptor of list. + + @return int + - @ref PCH_DMA_SUCCESS --> If appending of the + descriptor is successful. + + @see + - pch_add_dma_desc +*/ +int dma_add_desc(int channel, struct pch_dma_desc *start, + struct pch_dma_desc *end) +{ + struct pch_dma_desc *desc_addr; + + desc_addr = pch_dma_channel_info[channel].pTailOfList; + + /* Obtaining the virtual address. */ + desc_addr = (struct pch_dma_desc *) phys_to_virt((u32) desc_addr); + + /* If virtual address calculation successful. */ + desc_addr->nextDesc = (u32) start; + pch_dma_channel_info[channel].pTailOfList = end; + + PCH_DEBUG("Function dma_add_desc returns %d.\n", PCH_DMA_SUCCESS); + return PCH_DMA_SUCCESS; +} + +/*! @ingroup HALLayerAPI + @fn void dma_set_callback (int channel, void (*pch_dma_cbr) + ( int value,unsigned long data1),unsigned long data) + @brief To set callback function. + @remarks Sets the callback function to be called for a channel. + The main task performed by this function is: + - Updates the callback pointer for the channel + in the structure pch_dma_channel_info with the + parameter passed. + + @param channel [@ref IN] Channel number. + @param pch_dma_cbr [@ref IN] Function pointer + to call back function. + @param data [@ref IN] The data to be passed to + the callback function during + invoking. + + @return None. + + @see + - pch_dma_set_callback + */ +void dma_set_callback(int channel, + void (*pch_dma_cbr) (int value, unsigned long data1), + unsigned long data) +{ + pch_dma_channel_info[channel].call_back_func_ptr = pch_dma_cbr; + pch_dma_channel_info[channel].callback_data = data; + + PCH_DEBUG("Function dma_set_callback invoked successfully.\n"); +} + +/*! @ingroup HALLayerAPI + @fn irqreturn_t dma_interrupt (int irq, void *dev_id) + @brief Interrupt handler. + @remarks Handles the interrupt for the DMA. The main tasks + performed by this function are: + - Checks each DMA channels whether a DMA + transmission end or DMA status interrupt has + occurred. + - If a transmission end interrupt has occurred, + then invoke the callback function with @ref + PCH_DMA_END, denoting that the DMA transmission + has end. + - If a DMA abort interrupt has occurred, then + invoke the callback function with @ref + PCH_DMA_ABORT, denoting that a DMA abort has + occurred. + + @param irq [@ref IN] Interrupt Request number + @param dev_id [@ref IN] dev_id of device for which + interrupt is raised . + + @return irqreturn_t + - IRQ_HANDLED --> If interrupt has been processed. + - IRQ_NONE --> If no interrupt has been processed. + + */ +irqreturn_t dma_interrupt(int irq, void *dev_id) +{ + irqreturn_t retval = IRQ_NONE; + u32 status_reg0; + u32 status_reg2; + u32 base_address; + u32 dev_type; + u32 i; + u16 status; + + base_address = ((struct pch_dma_devices *) dev_id)->base_addr; + dev_type = ((struct pch_dma_devices *) dev_id)->dev_typ; + + /* Reading the status registers. */ + status_reg0 = PCH_READ_LONG((base_address + DMA_STS0_OFFSET)); + status_reg2 = PCH_READ_LONG((base_address + DMA_STS2_OFFSET)); + PCH_DEBUG("dma_interrupt -> Status register STS0: %x STS2: " + "%x.\n", status_reg0, status_reg2); + + /* Clearing the interrupts. */ + dma_clear_interrupt_status(base_address, status_reg0, status_reg2); + + /* Handling the interrupts. */ + for (i = 0; i < PCH_DMA_CHANNELS_MAX; i++) { + if ((pch_dma_channel_table[i].dma_dev_id == dev_type) && + (pch_dma_channel_table[i].ch_alloced == 1) && + (pch_dma_channel_info[i].bChEnabled == 1) + ) { + status = + dma_get_interrupt_status(pch_dma_channel_table + [i].channel, status_reg0, + status_reg2); + PCH_DEBUG + ("dma_interrupt -> Interrupt status for ch: %d is " + "%x.\n", i, status); + + if (status == 1) { + int value = PCH_DMA_END; + + status = + dma_get_abort_status(pch_dma_channel_table + [i].channel, + status_reg0, + status_reg2); + + if (status == 1) { + value = PCH_DMA_ABORT; + + PCH_DEBUG + ("dma_interrupt -> DMA Abort " + "interrupt from channel%d.\n", i); + } +#ifdef DEBUG + else { + PCH_DEBUG + ("dma_interrupt -> DMA Completion " + "interrupt " + "from channel%d.\n", i); + } +#endif + if (pch_dma_channel_info[i]. + call_back_func_ptr) { + u32 data = + pch_dma_channel_info + [i].callback_data; + (pch_dma_channel_info + [i].call_back_func_ptr) (value, data); + } + + /* Determining whether the channel has been + disabled. */ + { + u32 ctrl_val; + s32 ch = + pch_dma_channel_table[i].channel; + u32 base_address = + pch_dma_channel_table[i].base; + + if (ch < 8) { + ctrl_val = + PCH_READ_LONG((base_address + + DMA_CTL0_OFFSET)); + + ctrl_val &= + ((0x3) << + (ch * DMA_SHIFT_MODE_BITS)); + } else { + ctrl_val = + PCH_READ_LONG((base_address + + DMA_CTL3_OFFSET)); + ctrl_val &= + ((0x3) << + ((ch - 8) * + DMA_SHIFT_MODE_BITS)); + } + + pch_dma_channel_info[i].bChEnabled = + (ctrl_val != 0) ? 1 : 0; + + } /* End */ + + retval = IRQ_HANDLED; + } + } + } + + PCH_DEBUG("Function dma_interrupt returns %d.\n", retval); + return retval; +} + +/*! @ingroup HALLayerAPI + @fn int dma_direct_start (int channel) + @brief To generate the DMA request which each Function-IP + transmits. + @remarks This function is used to initiate the DMA + transfer process. The main task performed by + this function is: + - Sets the value of DMAn Direct Start bit in the + Control register 2 to start DMA transfer on + channel n. + + @param channel [@ref IN] Channel number for which DMA + transfer is to be started. + + @return int + - @ref PCH_DMA_SUCCESS --> On Success. + + @see + - pch_dma_direct_start + */ +int dma_direct_start(int channel) +{ + int ch; + u32 base_address; + + ch = pch_dma_channel_table[channel].channel; + base_address = pch_dma_channel_table[channel].base; + + if (ch < 8) { + PCH_DMA_BIT_SET((base_address + DMA_CTL2_OFFSET), + (DMA_DIR_START << ch)); + } else { + PCH_DMA_BIT_SET((base_address + DMA_CTL2_OFFSET), + (DMA_DIR_START << (ch + 6))); + } + + PCH_DEBUG("dma_direct_start -> Direct2 RegValue: " + "%x.\n", PCH_READ_LONG((base_address + DMA_CTL2_OFFSET))); + + PCH_DEBUG("Function dma_direct_start returns " + "%d.\n", PCH_DMA_SUCCESS); + return PCH_DMA_SUCCESS; +} + +/*! @ingroup HALLayerAPI + @fn int dma_set_priority (int channel, int priority) + @brief Set the priority. + @remarks Sets the priority for a channel. The main task + performed by this function is: + - Set the value of DMAn Priority Level bits for + the channel in the Control register1. + + @param channel [@ref IN] DMA channel number. + @param priority [@ref IN] Priority to be set for + the DMA channel. + + @return int + - @ref PCH_DMA_SUCCESS --> On Success. + + @see + - pch_set_dma_priority + */ +int dma_set_priority(int channel, int priority) +{ + int ch; + u32 base_address; + u32 reg_val; + + ch = pch_dma_channel_table[channel].channel; + base_address = pch_dma_channel_table[channel].base; + + reg_val = PCH_READ_LONG((base_address + DMA_CTL1_OFFSET)); + + if (ch < 8) { + reg_val &= + ~(DMA_MASK_PRIORITY_BITS << (ch * DMA_SHIFT_PRIORITY_BITS)); + reg_val |= (((u32) priority) << (ch * DMA_SHIFT_PRIORITY_BITS)); + } else { + reg_val &= + ~(DMA_MASK_PRIORITY_BITS << + (((ch - 8) * DMA_SHIFT_PRIORITY_BITS) + 2)); + reg_val |= + (((u32) priority) << + (((ch - 8) * DMA_SHIFT_PRIORITY_BITS) + 2)); + } + + PCH_WRITE_LONG(reg_val, (base_address + DMA_CTL1_OFFSET)); + + PCH_DEBUG("Function dma_set_priority returns " + "%d.\n", PCH_DMA_SUCCESS); + return PCH_DMA_SUCCESS; +} + +/*! @ingroup HALLayerAPI + @fn int dma_enable_disable_interrupt (int channel, int bEnable) + @brief Enables or Disables Interrupts . + @remarks Writes the corresponding register to either + enable or disable interrupts. The main tasks + performed by this function are: + - If bEnable is DMA_INTERRUPT_ENABLE (1), + sets the DMAn Interrupt Enable bit in control + register2. + - If bEnable is DMA_INTERRUPT_DISABLE (0), + clears the DMAn Interrupt Enable bit in control + register2. + + @param channel [@ref IN] Channel number + @param bEnable [@ref IN] Flag to indicate whether + to enable or disable interrupt. + + @return int + - @ref PCH_DMA_SUCCESS --> On Success. + + @see + - dma_init + - dma_exit + */ +int dma_enable_disable_interrupt(int channel, int bEnable) +{ + u32 base_address; + u16 ch; + + ch = pch_dma_channel_table[channel].channel; + base_address = pch_dma_channel_table[channel].base; + + if (ch < 8) { + if (PCH_DMA_INTERRUPT_ENABLE == bEnable) { + PCH_DMA_BIT_SET((base_address + DMA_CTL2_OFFSET), + (DMA_INTERRUPT_BIT << ch)); + } else { /* if(bEnable == PCH_DMA_INTERRUPT_DISABLE) */ + + PCH_DMA_BIT_CLEAR((base_address + DMA_CTL2_OFFSET), + (DMA_INTERRUPT_BIT << ch)); + } + + } else { + if (PCH_DMA_INTERRUPT_ENABLE == bEnable) { + PCH_DMA_BIT_SET((base_address + DMA_CTL2_OFFSET), + (DMA_INTERRUPT_BIT << (ch + 8))); + } else { /* if(bEnable == PCH_DMA_INTERRUPT_DISABLE) */ + + PCH_DMA_BIT_CLEAR((base_address + DMA_CTL2_OFFSET), + (DMA_INTERRUPT_BIT << (ch + 8))); + } + } + + PCH_DEBUG("dma_enable_disable_interrupt -> CTL2 Register Value: " + "%x.\n", PCH_READ_LONG((base_address + DMA_CTL2_OFFSET))); + + PCH_DEBUG("Function dma_enable_disable_interrupt returns " + "%d.\n", PCH_DMA_SUCCESS); + return PCH_DMA_SUCCESS; +} + +/*! @ingroup HALLayerAPI + @fn void get_dma_status(int channel, u16 *pDMAStatus) + @brief Gets the Status of DMA. + @remarks Gets the status of the specified DMA Channel. The + main task performed by this function is: + - Reads the data in the DMAn (for channel .n.) + Status bit of Status register0 (4ch or 8ch) or + Status register2 (12ch) and copy the value into + pDMAStatus. + + @param channel [@ref IN] Channel number. + @param pDMAStatus [@ref INOUT] Address of variable to + which + status information is copied. + + @return None. + + @see + - dma_exit + - dma_init + - pch_set_dma_mode + - pch_set_dma_addr + - pch_set_dma_count + - pch_set_dma_desc + - pch_add_dma_desc -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/