Messages in this thread | | | From | Bjorn Helgaas <> | Subject | Re: [regression] 2.6.37-rc1: Freeze while booting on HP nx6325 | Date | Wed, 24 Nov 2010 12:30:25 -0700 |
| |
On Wednesday, November 24, 2010 07:01:28 am Grzegorz Chwesewicz wrote: > Hi, I have a problem with 2.6.37-rc1. My HP nx6325 freezes during boot. > It happens after printing lines: > > [ 0.298457] atiixp 0000:00:14.1: not 100% native mode: will probe > irqs later > [ 0.298515] ide0: BM-DMA at 0x7040-0x7047 > [ 0.298573] atiixp 0000:00:14.1: simplex device: DMA disabled > [ 0.298625] ide1: DMA disabled > <Freeze>
I think this is the same problem as https://bugzilla.kernel.org/show_bug.cgi?id=23332
If you have more of the log, that would be useful, but I doubt you do because I don't think the nx6325 has a serial port. I do have a sample of that system, so I'm hoping to learn something about it today.
Thanks for the report!
Bjorn
> This didn't happen in 2.6.36. I bisected between 2.6.36 and 2.6.37-rc1: > > 1af3c2e45e7a641e774bbb84fa428f2f0bf2d9c9 is the first bad commit > commit 1af3c2e45e7a641e774bbb84fa428f2f0bf2d9c9 > Author: Bjorn Helgaas <bjorn.helgaas@hp.com> > Date: Tue Oct 26 15:41:54 2010 -0600 > > x86: allocate space within a region top-down > > Request that allocate_resource() use available space from high addresses > first, rather than the default of using low addresses first. > > The most common place this makes a difference is when we move or assign > new PCI device resources. Low addresses are generally scarce, so it's > better to use high addresses when possible. This follows Windows > practice > for PCI allocation. > > Reference: https://bugzilla.kernel.org/show_bug.cgi?id=16228#c42 > Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> > Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> > > Reverting above patch from latest linus-tree resolves problem. > > My lspci: > > 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10) > 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge > 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge > 00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge > 00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge > 00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA > Controller (rev 80) > 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host > Controller (rev 80) > 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host > Controller (rev 80) > 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host > Controller (rev 80) > 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82) > 00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller > (rev 80) > 00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition > Audio Controller (rev 01) > 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) > 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) > 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > HyperTransport Technology Configuration > 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > Address Map > 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > DRAM Controller > > 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > Miscellaneous Control > > 01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon > Xpress 200M] > > 02:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 > Gigabit Ethernet (rev 03) > > 02:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller > > > 02:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant > IEEE 1394 Host Controller > > 02:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia > Card Reader (SD/MMC/MS/MS PRO/xD) > > 02:04.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard > Compliant SD Host Controller > > 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 > Gigabit Ethernet (rev 10) > > 30:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g > (rev 01) > > Please CC to me, as I'm not subscribed to the list. > >
| |