lkml.org 
[lkml]   [2009]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Crash on reading the whole PCI config of PIIX4 SMBus
On Tue, 22 Sep 2009 17:46:10 +0200, Henrik Kretzschmar wrote:
> Hi there,
>
> at boot time my system (Wincor/Nixdorf Beetle D1) sometimes crashs while loading the i2c-piix4 driver.
> I found out that I can always trigger the crash as root, which one of those:
>
> # hexdump -C /proc/bus/pci/00/07.3
> # hexdump -C /sys/bus/pci/devices/0000:00:07.3/config
> # lspci -s 07.3 -xxx
>
> While initialization the i2c-piix4 driver does two reads to the config space, at 0xd2 and 0xd6,
> in a relative short time. That sometimes triggers the crash,
> but isn't that precise like one of those commands.
>
> While my investigations I put a printk() between those two reads and had no more crashs
> on module loading. I tested that with a script, doing insmod/rmmod 100 times in a row.
>
> But printk() can't be the solution, so I tried msleep(1) and udelay(250),
> but with each of these my system crashed.
> The time for the read and one printk() takes ~100 us on my machine,
> so both time values should be more than enough, if time would have been the reason.
>
> Does someone have an idea what the driver should do between those two reads, to avoid crashing?
> Can somebody with the same device trigger this crash too (greped LKML 2001-2008, found nothing)?

And to answer this question: with the same device (except that it's at
01.3 instead of 07.3 here), none of the 3 above commands crash my
system (kernel 2.6.29.)

--
Jean Delvare


\
 
 \ /
  Last update: 2009-09-22 20:11    [W:0.284 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site