lkml.org 
[lkml]   [2009]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] Adding LED1 & LED2 control for DA9034 backlight driver
On Mon, Sep 21, 2009 at 10:08 AM, Eric Miao <eric.y.miao@gmail.com> wrote:
>
> > Apparently there is a bug in the hardware design on my custom board. We are
> > using LED1 for backlight control.
> > Thanks Haojian for clarification.
> >
>
> Now you know that :-)
>
> Either let your hardware engineer change the design, or there are still
> workarounds, you can control the LED1/2 through the sysfs entries.

If I apply the patch which I send, backlight driver is working well
through the da093x_bl.c driver.
Because LED1 driver is same as the WLED driver apart from current
level it can provide. WLED can provide max of 32mA but LED can only
provide current <500uA.

Thanks for your concern.

Arun

>
> - eric


\
 
 \ /
  Last update: 2009-09-21 20:11    [W:0.103 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site