lkml.org 
[lkml]   [2009]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: sky2 rx length errors
(added cc's from the MAINTAINERS file)

On Fri, 18 Sep 2009 15:41:45 +0200 Grozdan <neutrino8@gmail.com> wrote:

> Hi,
>
> I have a Marvell onboard NIC (88E8053) and I've been noticing for a
> while now a bit weird behavior with the sky2 driver. This mostly
> occurs with newer kernels (2.6.30, 2.6.31) and my older distro kernel
> (2.6.27.21) does not seem to have the same problem. Basically, the
> sky2 driver will randomly and unpredictably spew rx length error
> messages and reboot itself. I also noticed in dmesg that this mostly
> occurs after "martian destination" messages. After this message, sky2
> starts spewing messages as shown below and then reboots itself. It is
> not really a big problem for me, but since I'm virtually always logged
> in in IRC, the client always loses connection, waits for a few minutes
> to get a response from the server and then relogs me again. I do not
> think it's a HW problem as the Marvell NIC otherwise works perfectly
> and I've checked my cable modem too which operates without a problem.
> Any ideas?
>
> PS: please cc me as I'm not subscribed to the mailing list
>
> sky2 driver version 1.23
> sky2 0000:05:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
> sky2 0000:05:00.0: setting latency timer to 64
> sky2 0000:05:00.0: PCI: Disallowing DAC for device
> sky2 0000:05:00.0: Yukon-2 EC chip revision 2
> sky2 0000:05:00.0: irq 53 for MSI/MSI-X
> sky2 0000:05:00.0: No interrupt generated using MSI, switching to INTx mode.
> sky2 eth0: addr 00:11:d8:a1:5b:0e
> sky2 eth0: enabling interface
> sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
> .....
> .....
> martian destination 0.0.0.0 from 172.23.204.1, dev eth0
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x5ea0100 length 598
> sky2 eth0: rx length error: status 0x5ea0100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x5ea0100 length 598
> sky2 eth0: rx length error: status 0x5ea0100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598
> sky2 eth0: rx length error: status 0x4420100 length 598



\
 
 \ /
  Last update: 2009-09-20 08:39    [W:0.091 / U:1.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site