lkml.org 
[lkml]   [2009]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 55/79] serial: kill USF_CLOSING_* definitions
Date
From: Alan Cox <alan@linux.intel.com>

The serial layer for some reason uses different defines for the special
case close delays and then conditionally switches to/from the normal ones
in the ioctls.

Remove this rather pointless abstraction

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/serial_core.c | 6 +++---
include/linux/serial_core.h | 3 ---
2 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 3c45a8d..69c4e20 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -652,7 +652,7 @@ static int uart_get_info(struct uart_state *state,
tmp.xmit_fifo_size = uport->fifosize;
tmp.baud_base = uport->uartclk / 16;
tmp.close_delay = port->close_delay / 10;
- tmp.closing_wait = port->closing_wait == USF_CLOSING_WAIT_NONE ?
+ tmp.closing_wait = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
ASYNC_CLOSING_WAIT_NONE :
port->closing_wait / 10;
tmp.custom_divisor = uport->custom_divisor;
@@ -690,7 +690,7 @@ static int uart_set_info(struct uart_state *state,
new_serial.irq = irq_canonicalize(new_serial.irq);
close_delay = new_serial.close_delay * 10;
closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
- USF_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
+ ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;

/*
* This semaphore protects port->count. It is also
@@ -1307,7 +1307,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
*/
tty->closing = 1;

- if (port->closing_wait != USF_CLOSING_WAIT_NONE)
+ if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, msecs_to_jiffies(port->closing_wait));

/*
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index bcafecd..d58e460 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -342,9 +342,6 @@ struct uart_port {
struct uart_state {
struct tty_port port;

-#define USF_CLOSING_WAIT_INF (0)
-#define USF_CLOSING_WAIT_NONE (~0U)
-
int pm_state;
struct circ_buf xmit;

--
1.6.4.2


\
 
 \ /
  Last update: 2009-09-19 23:57    [W:0.303 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site