Messages in this thread | | | Date | Mon, 17 Aug 2009 12:54:06 -0700 | From | Stephen Hemminger <> | Subject | Re: clocksource changes in 2.6.31 - possible regression |
| |
On Mon, 17 Aug 2009 20:34:02 +0200 (CEST) Thomas Gleixner <tglx@linutronix.de> wrote:
> On Mon, 17 Aug 2009, Stephen Hemminger wrote: > > On Mon, 17 Aug 2009 11:15:54 -0700 > > john stultz <johnstul@us.ibm.com> wrote: > > > > > The behavior you describe where you can't switch to the TSC, may be due > > > > > to the TSC disqualification code marking it as non HRT compatible > > > > > (again, I need to double check). While I'm not sure that's really > > > > > correct, as the TSC is fine for HRT, in this case on your box, the TSC > > > > > has been marked as unstable (likely due to being unsynced on old AMD SMP > > > > > systems). There is a real chance that the timekeeping code on your > > > > > system could see the TSC go backwards, calculate a negative time > > > > > interval, and then end up hanging. > > > > > > > > > > > > > TSC was alway stable on this box, and worked fine. There was no > > > > message in log about TSC instability. The change was bisected > > > > down to that one commit. > > > > > > But just to clarify, the TSC was never selected as the default > > > clocksource on the box either, right? > > > > correct. > > > > I am okay with turning it off on boot command line for my tests, > > but it might be an issue for other users. > > Can you please provide a full dmesg of pre 31 and the output of > /sys/.../available_clocksources before you switch to TSC ?
Linux version 2.6.30-1-amd64-vyatta (root@vyatta) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Fri Jul 31 10:10:16 PDT 2009 Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-1-amd64-vyatta quiet root=UUID=56949d77-24b4-41ec-83d4-0a6c2da784bd ro console=ttyS0,9600 console=tty0 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cff60000 (usable) BIOS-e820: 00000000cff60000 - 00000000cff72000 (ACPI data) BIOS-e820: 00000000cff72000 - 00000000cff80000 (ACPI NVS) BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) DMI present. last_pfn = 0xcff60 max_arch_pfn = 0x100000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-D4FFF write-protect D5000-E7FFF uncachable E8000-FFFFF write-protect MTRR variable ranges enabled: 0 disabled 1 disabled 2 base 0000000000 mask FF80000000 write-back 3 base 0080000000 mask FFC0000000 write-back 4 base 00C0000000 mask FFF0000000 write-back 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping: 0000000000000000-00000000cff60000 0000000000 - 00cfe00000 page 2M 00cfe00000 - 00cff60000 page 4k kernel direct mapping tables up to cff60000 @ 8000-e000 RAMDISK: 377f8000 - 37fef8ca ACPI: RSDP 00000000000f7170 00024 (v02 PTLTD ) ACPI: XSDT 00000000cff6d116 00044 (v01 PTLTD XSDT 06040000 LTP 00000000) ACPI: FACP 00000000cff71d0f 000F4 (v03 AMD HAMMER 06040000 PTEC 000F4240) ACPI: DSDT 00000000cff6d15a 04B41 (v01 AMD-K8 AMDACPI 06040000 MSFT 0100000E) ACPI: FACS 00000000cff72fc0 00040 ACPI: SRAT 00000000cff71e03 000C8 (v01 AMD HAMMER 06040000 AMD 00000001) ACPI: APIC 00000000cff71ecb 0008E (v01 PTLTD APIC 06040000 LTP 00000000) ACPI: ASF! 00000000cff71f59 000A7 (v16 MBI CETP 06040000 PTL 00000001) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 00cff60000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000077c98c] TEXT DATA BSS ==> [0000200000 - 000077c98c] #3 [00377f8000 - 0037fef8ca] RAMDISK ==> [00377f8000 - 0037fef8ca] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] #5 [000077d000 - 000077d140] BRK ==> [000077d000 - 000077d140] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] found SMP MP-table at [ffff8800000f7140] f7140 [ffffe20000000000-ffffe20002dfffff] PMD -> [ffff880001200000-ffff880003ffffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009d 0: 0x00000100 -> 0x000cff60 On node 0 totalpages: 851709 DMA zone: 56 pages used for memmap DMA zone: 1509 pages reserved DMA zone: 2432 pages, LIFO batch:0 DMA32 zone: 11590 pages used for memmap DMA32 zone: 836122 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xf0500000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 0, address 0xf0500000, GSI 24-27 ACPI: IOAPIC (id[0x04] address[0xf0510000] gsi_base[28]) IOAPIC[2]: apic_id 4, version 0, address 0xf0510000, GSI 28-31 ACPI: IOAPIC (id[0x05] address[0xf0520000] gsi_base[32]) IOAPIC[3]: apic_id 5, version 0, address 0xf0520000, GSI 32-35 ACPI: IOAPIC (id[0x06] address[0xf0530000] gsi_base[36]) IOAPIC[4]: apic_id 6, version 0, address 0xf0530000, GSI 36-39 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000) NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 24 pages at ffff88000101c000, static data 68320 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 838554 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-1-amd64-vyatta quiet root=UUID=56949d77-24b4-41ec-83d4-0a6c2da784bd ro console=ttyS0,9600 console=tty0 Initializing CPU#0 NR_IRQS:1280 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1994.295 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... AGP bridge at 08:00:00 Aperture from AGP @ d0000000 old size 32 MB Aperture from AGP @ d0000000 size 256 MB (APSIZE f00) Node 0: aperture @ d0000000 size 256 MB Node 1: aperture @ d0000000 size 256 MB Memory: 3338700k/3407232k available (2544k kernel code, 396k absent, 67432k reserved, 1723k data, 384k init) Calibrating delay loop (skipped), value calculated using timer frequency.. 3988.59 BogoMIPS (lpj=7977180) Security Framework initialized SELinux: Disabled at boot. Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) tseg: 00cff80000 ACPI: Core revision 20090320 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 CPU0: AMD Opteron(tm) Processor 246 stepping 08 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3988.88 BogoMIPS (lpj=7977769) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Opteron(tm) Processor 246 stepping 08 Brought up 2 CPUs Total of 2 processors activated (7977.47 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 net_namespace: 1888 bytes NET: Registered protocol family 16 node 0 link 2: io port [0, 2fff] node 0 link 0: io port [3000, 4fff] TOM: 00000000d0000000 aka 3328M node 0 link 2: mmio [f0000000, f051ffff] node 0 link 0: mmio [f0520000, f09fffff] node 0 link 0: mmio [d0000000, efffffff] node 0 link 2: mmio [fec00000, fec0ffff] node 0 link 0: mmio [a0000, bffff] bus: [00,07] on node 0 link 2 bus: 00 index 0 io port: [0, 2fff] bus: 00 index 1 io port: [5000, ffff] bus: 00 index 2 mmio: [f0000000, f051ffff] bus: 00 index 3 mmio: [f0a00000, fcffffffff] bus: [08,ff] on node 0 link 0 bus: 08 index 0 io port: [3000, 4fff] bus: 08 index 1 mmio: [f0520000, f09fffff] bus: 08 index 2 mmio: [d0000000, efffffff] bus: 08 index 3 mmio: [a0000, bffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:07.1: reg 20 io port: [0x1460-0x146f] pci 0000:00:07.2: reg 10 io port: [0x1440-0x145f] pci 0000:00:07.5: reg 10 io port: [0x1000-0x10ff] pci 0000:00:07.5: reg 14 io port: [0x1400-0x143f] pci 0000:00:0a.1: reg 10 64bit mmio: [0xf0500000-0xf0500fff] pci 0000:00:0b.1: reg 10 64bit mmio: [0xf0510000-0xf0510fff] pci 0000:01:02.0: reg 10 io port: [0x00-0x07] pci 0000:01:02.0: reg 14 io port: [0x00-0x03] pci 0000:01:02.0: reg 18 io port: [0x00-0x07] pci 0000:01:02.0: reg 1c io port: [0x00-0x03] pci 0000:01:02.0: reg 20 io port: [0x00-0x0f] pci 0000:01:02.0: reg 24 32bit mmio: [0x000000-0x0001ff] pci 0000:01:02.0: reg 30 32bit mmio: [0x000000-0x07ffff] pci 0000:01:02.0: supports D1 D2 pci 0000:01:03.0: reg 10 32bit mmio: [0xf0020000-0xf0020fff] pci 0000:01:03.0: supports D1 D2 pci 0000:01:03.0: PME# supported from D0 D1 D2 D3hot pci 0000:01:03.0: PME# disabled pci 0000:01:03.1: reg 10 32bit mmio: [0xf0030000-0xf0030fff] pci 0000:01:03.1: supports D1 D2 pci 0000:01:03.1: PME# supported from D0 D1 D2 D3hot pci 0000:01:03.1: PME# disabled pci 0000:01:03.2: reg 10 32bit mmio: [0xf0040000-0xf00400ff] pci 0000:01:03.2: supports D1 D2 pci 0000:01:03.2: PME# supported from D0 D1 D2 D3hot pci 0000:01:03.2: PME# disabled pci 0000:00:06.0: bridge 32bit mmio: [0xf0000000-0xf00fffff] pci 0000:02:01.0: reg 10 64bit mmio: [0xf0100000-0xf0103fff] pci 0000:02:01.0: reg 18 io port: [0x2000-0x20ff] pci 0000:02:01.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:02:01.0: supports D1 pci 0000:02:01.0: PME# supported from D0 D1 D3hot D3cold pci 0000:02:01.0: PME# disabled pci 0000:00:0a.0: bridge io port: [0x2000-0x2fff] pci 0000:00:0a.0: bridge 32bit mmio: [0xf0100000-0xf01fffff] pci 0000:03:02.0: reg 10 64bit mmio: [0xf0200000-0xf020ffff] pci 0000:03:02.0: PME# supported from D3hot D3cold pci 0000:03:02.0: PME# disabled pci 0000:00:0b.0: bridge 32bit mmio: [0xf0200000-0xf02fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.TP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PB._PRT] ACPI: PCI Root Bridge [PCI1] (0000:08) pci 0000:08:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff] pci 0000:08:03.1: reg 10 64bit mmio: [0xf0520000-0xf0520fff] pci 0000:08:04.1: reg 10 64bit mmio: [0xf0530000-0xf0530fff] pci 0000:09:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] pci 0000:09:00.0: reg 14 io port: [0x3000-0x30ff] pci 0000:09:00.0: reg 18 32bit mmio: [0xf0800000-0xf080ffff] pci 0000:09:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:09:00.0: supports D1 D2 pci 0000:09:00.1: reg 10 32bit mmio: [0xe8000000-0xefffffff] pci 0000:09:00.1: reg 14 32bit mmio: [0xf0810000-0xf081ffff] pci 0000:09:00.1: supports D1 D2 pci 0000:08:01.0: bridge io port: [0x3000-0x3fff] pci 0000:08:01.0: bridge 32bit mmio: [0xf0800000-0xf08fffff] pci 0000:08:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff] pci 0000:13:04.0: reg 10 io port: [0x4400-0x44ff] pci 0000:13:04.0: reg 14 64bit mmio: [0xf0900000-0xf0901fff] pci 0000:13:04.0: reg 1c io port: [0x4000-0x40ff] pci 0000:13:04.0: reg 30 32bit mmio: [0x000000-0x07ffff] pci 0000:13:04.1: reg 10 io port: [0x4c00-0x4cff] pci 0000:13:04.1: reg 14 64bit mmio: [0xf0910000-0xf0911fff] pci 0000:13:04.1: reg 1c io port: [0x4800-0x48ff] pci 0000:13:04.1: reg 30 32bit mmio: [0x000000-0x07ffff] pci 0000:08:04.0: bridge io port: [0x4000-0x4fff] pci 0000:08:04.0: bridge 32bit mmio: [0xf0900000-0xf09fffff] pci_bus 0000:08: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.Z00J._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.G1PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.G1PB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *5 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 10 11) *9 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11) SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing pci 0000:08:00.0: BAR 0: can't allocate resource agpgart-amd64 0000:08:00.0: AMD 8151 AGP Bridge rev B2 agpgart-amd64 0000:08:00.0: AGP aperture is 256M @ 0xd0000000 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:05: ioport range 0x4d0-0x4d1 has been reserved system 00:05: ioport range 0x1100-0x117f has been reserved system 00:05: ioport range 0x1180-0x11ff has been reserved system 00:05: ioport range 0x100-0x11f has been reserved system 00:05: iomem range 0xfff80000-0xffffffff has been reserved system 00:05: iomem range 0xff780000-0xff7fffff has been reserved system 00:05: iomem range 0xfee00000-0xfeefffff could not be reserved pci 0000:00:06.0: PCI bridge, secondary bus 0000:01 pci 0000:00:06.0: IO window: 0x5000-0x5fff pci 0000:00:06.0: MEM window: 0xf0000000-0xf00fffff pci 0000:00:06.0: PREFETCH window: 0x000000f0300000-0x000000f03fffff pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0a.0: IO window: 0x2000-0x2fff pci 0000:00:0a.0: MEM window: 0xf0100000-0xf01fffff pci 0000:00:0a.0: PREFETCH window: 0x000000f0400000-0x000000f04fffff pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 pci 0000:00:0b.0: IO window: disabled pci 0000:00:0b.0: MEM window: 0xf0200000-0xf02fffff pci 0000:00:0b.0: PREFETCH window: disabled pci 0000:08:01.0: PCI bridge, secondary bus 0000:09 pci 0000:08:01.0: IO window: 0x3000-0x3fff pci 0000:08:01.0: MEM window: 0xf0800000-0xf08fffff pci 0000:08:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff pci 0000:08:03.0: PCI bridge, secondary bus 0000:0e pci 0000:08:03.0: IO window: disabled pci 0000:08:03.0: MEM window: disabled pci 0000:08:03.0: PREFETCH window: disabled pci 0000:08:04.0: PCI bridge, secondary bus 0000:13 pci 0000:08:04.0: IO window: 0x4000-0x4fff pci 0000:08:04.0: MEM window: 0xf0900000-0xf09fffff pci 0000:08:04.0: PREFETCH window: 0x000000f0600000-0x000000f06fffff pci_bus 0000:00: resource 0 io: [0x00-0x2fff] pci_bus 0000:00: resource 1 io: [0x5000-0xffff] pci_bus 0000:00: resource 2 mem: [0xf0000000-0xf051ffff] pci_bus 0000:00: resource 3 mem: [0xf0a00000-0xfcffffffff] pci_bus 0000:01: resource 0 io: [0x5000-0x5fff] pci_bus 0000:01: resource 1 mem: [0xf0000000-0xf00fffff] pci_bus 0000:01: resource 2 pref mem [0xf0300000-0xf03fffff] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] pci_bus 0000:02: resource 1 mem: [0xf0100000-0xf01fffff] pci_bus 0000:02: resource 2 pref mem [0xf0400000-0xf04fffff] pci_bus 0000:03: resource 1 mem: [0xf0200000-0xf02fffff] pci_bus 0000:08: resource 0 io: [0x3000-0x4fff] pci_bus 0000:08: resource 1 mem: [0xf0520000-0xf09fffff] pci_bus 0000:08: resource 2 mem: [0xd0000000-0xefffffff] pci_bus 0000:08: resource 3 mem: [0x0a0000-0x0bffff] pci_bus 0000:09: resource 0 io: [0x3000-0x3fff] pci_bus 0000:09: resource 1 mem: [0xf0800000-0xf08fffff] pci_bus 0000:09: resource 2 pref mem [0xe0000000-0xefffffff] pci_bus 0000:13: resource 0 io: [0x4000-0x4fff] pci_bus 0000:13: resource 1 mem: [0xf0900000-0xf09fffff] pci_bus 0000:13: resource 2 pref mem [0xf0600000-0xf06fffff] NET: Registered protocol family 2 Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 8158k freed audit: initializing netlink socket (disabled) type=2000 audit(1250534164.624:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) squashfs: version 4.0 (2009/01/31) Phillip Lougher msgmni has been set to 6538 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) boot interrupts on PCI device 0x1022:0x746b already disabled pci 0000:00:0a.0: MSI quirk detected; subordinate MSI disabled disabled boot interrupts on PCI device 0x1022:0x7450 pci 0000:00:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC pci 0000:00:0b.0: MSI quirk detected; subordinate MSI disabled disabled boot interrupts on PCI device 0x1022:0x7450 pci 0000:00:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC agpgart-amd64 0000:08:00.0: Chipset erratum: Disabling direct PCI/AGP transfers pci 0000:08:03.0: MSI quirk detected; subordinate MSI disabled disabled boot interrupts on PCI device 0x1022:0x7450 pci 0000:08:03.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC pci 0000:08:04.0: MSI quirk detected; subordinate MSI disabled disabled boot interrupts on PCI device 0x1022:0x7450 pci 0000:08:04.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC pci 0000:09:00.0: Boot video device AMD768 RNG detected Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded Driver 'sd' needs updating - please use bus_type methods PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice EDAC MC: Ver: 2.1.0 Jul 31 2009 cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Freeing unused kernel memory: 384k freed input: AT Translated Set 2 keyboard as /class/input/input0 pata_acpi 0000:01:02.0: enabling device (0004 -> 0007) pata_acpi 0000:01:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pata_acpi 0000:01:02.0: PCI INT A disabled sata_sil 0000:01:02.0: version 2.4 sata_sil 0000:01:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 sata_sil 0000:01:02.0: Applying R_ERR on DMA activate FIS errata fix FDC 0 is a National Semiconductor PC87306 scsi0 : sata_sil scsi1 : sata_sil ata1: SATA max UDMA/100 mmio m512@0xf0000000 tf 0xf0000080 irq 17 ata2: SATA max UDMA/100 mmio m512@0xf0000000 tf 0xf00000c0 irq 17 pata_amd 0000:00:07.1: version 0.4.1 scsi2 : pata_amd scsi3 : pata_amd ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1460 irq 14 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1468 irq 15 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb sky2 driver version 1.22 sky2 0000:02:01.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 sky2 0000:02:01.0: Yukon-2 XL chip revision 1 sky2 eth0: addr 00:00:5a:72:6b:87 sky2 eth1: addr 00:00:5a:72:6b:88 tg3.c:v3.98 (February 25, 2009) tg3 0000:03:02.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 tg3 0000:03:02.0: PME# disabled eth2: Tigon3 [partno(BCM95703A30) rev 1002] (PCIX:100MHz:64-bit) MAC address 00:0d:60:53:08:18 eth2: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1]) eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0] eth2: dma_rwctrl[769c4000] dma_mask[64-bit] ata1: SATA link down (SStatus 0 SControl 310) ata2: SATA link down (SStatus 0 SControl 310) ata4.01: ATAPI: ATAPI CD N DH52N2P, CP51, max UDMA/33 ata4.01: configured for UDMA/33 scsi 3:0:1:0: CD-ROM ATAPI CD N DH52N2P CP51 PQ: 0 ANSI: 5 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:01:03.2: PCI INT C -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:01:03.2: EHCI Host Controller ehci_hcd 0000:01:03.2: new USB bus registered, assigned bus number 1 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver aic79xx 0000:13:04.0: PCI INT A -> GSI 39 (level, low) -> IRQ 39 ehci_hcd 0000:01:03.2: irq 16, io mem 0xf0040000 Driver 'sr' needs updating - please use bus_type methods ehci_hcd 0000:01:03.2: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ohci_hcd 0000:01:03.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:01:03.0: OHCI Host Controller ohci_hcd 0000:01:03.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:01:03.0: irq 18, io mem 0xf0020000 sr0: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:1:0: Attached scsi CD-ROM sr0 sr 3:0:1:0: Attached scsi generic sg0 type 5 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ohci_hcd 0000:01:03.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:01:03.1: OHCI Host Controller ohci_hcd 0000:01:03.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:01:03.1: irq 19, io mem 0xf0030000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected scsi4 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 <Adaptec AIC7902 Ultra320 SCSI adapter> aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100MHz, 512 SCBs scsi 4:0:0:0: Direct-Access MAXTOR ATLAS15K2_36SCA JNZM PQ: 0 ANSI: 3 target4:0:0: asynchronous scsi4:A:0:0: Tagged Queuing enabled. Depth 32 target4:0:0: Beginning Domain Validation target4:0:0: wide asynchronous target4:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI (6.25 ns, offset 127) target4:0:0: Ending Domain Validation sd 4:0:0:0: Attached scsi generic sg1 type 0 sd 4:0:0:0: [sda] 71132959 512-byte hardware sectors: (36.4 GB/33.9 GiB) scsi 4:0:1:0: Direct-Access MAXTOR ATLAS15K2_36SCA JNZM PQ: 0 ANSI: 3 target4:0:1: asynchronous scsi4:A:1:0: Tagged Queuing enabled. Depth 32 target4:0:1: Beginning Domain Validation sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Mode Sense: bf 00 10 08 sd 4:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA target4:0:1: wide asynchronous target4:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI (6.25 ns, offset 127) scsi4: Invalid Sequencer interrupt occurred, resetting channel. sda: sda1 sd 4:0:0:0: [sda] Attached SCSI disk target4:0:1: Ending Domain Validation sd 4:0:1:0: Attached scsi generic sg2 type 0 scsi4: Invalid Sequencer interrupt occurred, resetting channel. sd 4:0:1:0: [sdb] 71132959 512-byte hardware sectors: (36.4 GB/33.9 GiB) scsi4: Invalid Sequencer interrupt occurred, resetting channel. sd 4:0:1:0: [sdb] Write Protect is off sd 4:0:1:0: [sdb] Mode Sense: bf 00 10 08 scsi4: Invalid Sequencer interrupt occurred, resetting channel. aic79xx 0000:13:04.1: PCI INT B -> GSI 38 (level, low) -> IRQ 38 sd 4:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA sdb: sdb1 sd 4:0:1:0: [sdb] Attached SCSI disk scsi5 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 <Adaptec AIC7902 Ultra320 SCSI adapter> aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100MHz, 512 SCBs target5:0:0: asynchronous target5:0:1: asynchronous target5:0:2: asynchronous target5:0:3: asynchronous target5:0:4: asynchronous target5:0:5: asynchronous target5:0:6: asynchronous target5:0:8: asynchronous target5:0:9: asynchronous target5:0:10: asynchronous target5:0:11: asynchronous target5:0:12: asynchronous target5:0:13: asynchronous target5:0:14: asynchronous target5:0:15: asynchronous md: linear personality registered for level -1 md: multipath personality registered for level -4 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 xor: automatically using best checksumming function: generic_sse generic_sse: 5957.000 MB/sec xor: using function: generic_sse (5957.000 MB/sec) async_tx: api initialized (async) raid6: int64x1 1619 MB/s raid6: int64x2 2361 MB/s raid6: int64x4 1911 MB/s raid6: int64x8 1545 MB/s raid6: sse2x1 867 MB/s raid6: sse2x2 1975 MB/s raid6: sse2x4 2807 MB/s raid6: using algorithm sse2x4 (2807 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid10 personality registered for level 10 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with writeback data mode. udevd version 125 started pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp 0000:00:06.0: HPC vendor_id 1022 device_id 7460 ss_vid 0 ss_did 0 shpchp 0000:00:06.0: Cannot reserve MMIO region shpchp 0000:00:0a.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 shpchp 0000:00:0a.0: Cannot reserve MMIO region shpchp 0000:00:0b.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 shpchp 0000:00:0b.0: Cannot reserve MMIO region input: Power Button as /class/input/input1 ACPI: Power Button [PWRF] input: Sleep Button as /class/input/input2 ACPI: Sleep Button [SLPF] input: Power Button as /class/input/input3 ACPI: Power Button [PWRB] shpchp 0000:08:01.0: HPC vendor_id 1022 device_id 7455 ss_vid 0 ss_did 0 shpchp 0000:08:01.0: Cannot reserve MMIO region shpchp 0000:08:03.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 shpchp 0000:08:03.0: Cannot reserve MMIO region shpchp 0000:08:04.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 shpchp 0000:08:04.0: Cannot reserve MMIO region shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: processor limited to max C-state 1 processor ACPI_CPU:00: registered as cooling_device0 processor ACPI_CPU:01: registered as cooling_device1 rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram input: PC Speaker as /class/input/input4 input: ImPS/2 Generic Wheel Mouse as /class/input/input5 EXT3 FS on sda1, internal journal IPv4 FIB: Using LC-trie version 0.408 warning: `vyatta-zebra' uses 32-bit capabilities (legacy support in use) NET: Registered protocol family 10 lo: Disabled Privacy Extensions nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team ip6_tables: (C) 2000-2006 Netfilter Core Team Registering unionfs 2.5.2 (for 2.6.30) sky2 eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready sky2 eth1: enabling interface ADDRCONF(NETDEV_UP): eth1: link is not ready tg3 0000:03:02.0: PME# disabled ADDRCONF(NETDEV_UP): eth2: link is not ready NET: Registered protocol family 17 sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready tg3: eth2: Link is up at 1000 Mbps, full duplex. tg3: eth2: Flow control is on for TX and on for RX. ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready md: linear personality unregistered md: multipath personality unregistered md: raid0 personality unregistered md: raid1 personality unregistered md: raid6 personality unregistered md: raid5 personality unregistered md: raid4 personality unregistered md: raid10 personality unregistered
| |