lkml.org 
[lkml]   [2009]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine

Yeah, running 2.6.32.1 now, no problem.

dmesg shows:

ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

When booting 2.6.32.2 with the same config, I get

ata1.00: SATA link down (SStatus 0 SControl 301)

Weird.

On Mon, 21 Dec 2009, Robert Hancock wrote:

> On 12/21/2009 05:12 AM, fengxiangjun wrote:
> >
> > Hi,
> >
> > after upgrading to 2.6.32.2,
> > with the attached config,
> > kernel booting always(just tried 10+ times) failed at:
> >
> > ata1.00: SATA link down (SStatus 0 SControl 301)
> > ...
> > VFS: Cannot open root device ...
>
> There were no libata changes in 2.6.32.2 that should have affected this. Are
> you sure the .config is unchanged? Have you rechecked that 2.6.31.1 still
> works?
>
---------------------------------------------------------------------------------------------------
Confidentiality Notice: The information contained in this e-mail and any accompanying attachment(s)
is intended only for the use of the intended recipient and may be confidential and/or privileged of
Neusoft Corporation, its subsidiaries and/or its affiliates. If any reader of this communication is
not the intended recipient, unauthorized use, forwarding, printing, storing, disclosure or copying
is strictly prohibited, and may be unlawful.If you have received this communication in error,please
immediately notify the sender by return e-mail, and delete the original message and all copies from
your system. Thank you.
---------------------------------------------------------------------------------------------------



\
 
 \ /
  Last update: 2009-12-22 02:03    [W:0.172 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site