lkml.org 
[lkml]   [2009]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.32 seemed to have broken nVidia MCP7A sata controller
On 12/19/2009 01:29 AM, Jeff Garzik wrote:
> On 12/19/2009 01:13 AM, Mike Cui wrote:
>> I have an nVidia MCP7A AHCI controller. I upgraded to 2.6.32.2 and my
>> system deterministically freezes trying to mount file systems. Once in
>> a while it will come back and finish booting after freezing for 1
>> minute or 2. dmesg indicates that there were NCQ errors, but 2.6.31
>> anb before has always worked flawlessly for me. What changed in
>> 2.6.32? I will be more than happy to help track down this issue.
>
>> ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
>> ata1.00: cmd 61/08:00:4f:ad:03/00:00:00:00:00/40 tag 0 ncq 4096 out
>> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>> ata1: hard resetting link
>> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> ata1.00: configured for UDMA/133
>> ata1.00: device reported invalid CHS sector 0
>
> Looks like things are timing out, and then go downhill from there. This
> explanation of timeout gives some hints on possible causes:
> http://ata.wiki.kernel.org/index.php/Libata_error_messages#Error_classes
>
> The ideal would be if you could bisect between 2.6.31 and 2.6.32, to see
> if it's a software change that is the cause.
>
> Looking at drivers/ata/ahci.c history, the only thing that -might- cause
> problems is 388539f3ff0cf1de926b03f94e1eec112358f74d ('git show $commit'
> for full commit info and diff).

I suspect that as well (it's the commit that adds FPDMA auto-activate on
DMA setup FIS support). Your drive indicates it's supported but it's
possible it's broken on that drive or the controller. If the drive
doesn't set the activate bit in the DMA setup FIS properly or the
controller doesn't respect it, then FPDMA requests will stall.

Mike, can you try and revert that patch, or else just change this line
in drivers/ata/ahci.c:

pi.flags |= ATA_FLAG_NCQ | ATA_FLAG_FPDMA_AA;

to

pi.flags |= ATA_FLAG_NCQ;

and rebuild and see if it works better?

I tend to suspect the controller is the problem (I've got WD drives that
work fine with AA on Intel AHCI, though it could be model-specific). I
guess the only way to verify for sure which one it is would be if
someone else had that particular drive model on a different AHCI
controller and could verify if it worked with 2.6.32+ or not.


\
 
 \ /
  Last update: 2009-12-19 19:37    [W:0.088 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site