Messages in this thread | | | From | Krzysztof Halasa <> | Subject | Re: No PCI-X / PCI-E cards ... | Date | Fri, 18 Dec 2009 16:26:01 +0100 |
| |
Xavier Bestel <xavier.bestel@free.fr> writes:
>> I first plugged a wifi PCI card into a PCI-X slot (there's no PCI slot), >> it didn't appear in lspci. As I thought it was a voltage problem (PCI-X >> only accept 3.3v, not 5v IIRC)
The card has to force 33 MHz non-PCI-X mode. I'd check if the "pins" 38B (PCIXCAP) and 49B (M66EN) are both connected to GND. Also you can try inserting another PCI card into another PCI-X slot (in the same bus segment), this may force 33 PCI mode (check if the other card is detected). -- Krzysztof Halasa
| |