This message generated a parse failure. Raw output follows here. Please use 'back' to navigate. From devnull@lkml.org Mon Jun 17 20:31:12 2024 Delivery-date: Tue, 15 Dec 2009 22:44:41 +0100 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1758013AbZLOVoT (ORCPT ); Tue, 15 Dec 2009 16:44:19 -0500 Received: from hera.kernel.org ([140.211.167.34]:37082 "EHLO hera.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757677AbZLOVoR (ORCPT ); Tue, 15 Dec 2009 16:44:17 -0500 Received: from [129.146.52.162] (sca-ea-fw-1.Sun.COM [192.18.43.225]) (authenticated bits=0) by hera.kernel.org (8.14.3/8.14.3) with ESMTP id nBFLhnZ8012845 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Tue, 15 Dec 2009 21:43:50 GMT Message-Id: <4B2802E4.40404@kernel.org> Date: Tue, 15 Dec 2009 13:43:00 -0800 From: Yinghai Lu User-Agent: Thunderbird 2.0.0.23 (X11/20090817) Mime-Version: 1.0 To: Jens Axboe Cc: Jesse Barnes , Linux Kernel , mingo@elte.hu, rdreier@cisco.com, Suresh Siddha , "linux-pci@vger.kernel.org" , "H. Peter Anvin" , Subject: Re: kexec boot regression References: <4B27E817.6030705@kernel.org> <20091215195111.GV28252@kernel.dk> <4B27EE38.1050103@kernel.org> <20091215201909.GY28252@kernel.dk> <4B27EFC2.1000505@kernel.org> <20091215204221.GZ28252@kernel.dk> <20091215205512.GA28252@kernel.dk> <20091215210126.GB28252@ In-Reply-To: <20091215214009.GD28252@kernel.dk> Content-Type: multipart/mixed; boundary="------------030902050905090103040605" Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-Id: X-Mailing-List: linux-kernel@vger.kernel.org This is a multi-part message in MIME format. --------------030902050905090103040605 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Jens Axboe wrote: > On Tue, Dec 15 2009, Jens Axboe wrote: >> On Tue, Dec 15 2009, Yinghai Lu wrote: >>> Jens Axboe wrote: >>>> On Tue, Dec 15 2009, Jens Axboe wrote: >>>>> On Tue, Dec 15 2009, Jens Axboe wrote: >>>>>> On Tue, Dec 15 2009, Yinghai Lu wrote: >>>>>>> Jens Axboe wrote: >>>>>>>> On Tue, Dec 15 2009, Yinghai Lu wrote: >>>>>>>>> Jens Axboe wrote: >>>>>>>>>> On Tue, Dec 15 2009, Yinghai Lu wrote: >>>>>>>>>>> Jens Axboe wrote: >>>>>>>>>>>> On Tue, Dec 15 2009, Yinghai Lu wrote: >>>>>>>>>>>>> [PATCH] x86/pci: intel ioh bus num reg accessing fix >>>>>>>>>>>>> >>>>>>>>>>>>> it is above 0x100, so if mmconf is not enable, need to skip it >>>>>>>>>>>> This works, it kexecs kernels fine. But since 2.6.32 doesn't have the >>>>>>>>>>>> mmconf problem to begin with, are we now just working around the issue? >>>>>>>>>>>> SRAT still reports issues, numa doesn't work. >>>>>>>>>>> that patch will be bullet proof... we need it. >>>>>>>>>>> >>>>>>>>>>> also still need to figure out why memmap range is not passed properly. >>>>>>>>>>> >>>>>>>>>>> do you mean 2.6.32 kexec 2.6.32 it have worked mmconf and numa in >>>>>>>>>>> second kernel? >>>>>>>>>> Yes, 2.6.32 booted and 2.6.32 kexec'ed works just fine, no SRAT >>>>>>>>>> complaints and NUMA works fine. >>>>>>>>> do you need >>>>>>>>> memmap=62G@4G >>>>>>>>> in this case? >>>>>>>> Yes, I've needed that always. >>>>>>> good, >>>>>>> >>>>>>> can you enable debug option in kexec to see why kexec can not pass >>>>>>> whole 38? range to second kernel? >>>>>> Not getting any output so far, -d doesn't do much. Poking around in the >>>>>> source... >>>>> OK, cold boot and kexec 2.0.1 gets all 39 ranges passed properly to >>>>> kexec'ed kernels. Since the older kexec stopped at range 30 (31 ranges >>>>> total), that smells like just a kexec bug. Retesting -git... >>>> Current -git works fine when all the ranges are passed correctly. So, I >>>> think, the only existing regression is the SRAT issue. >>> did you change node_shift? >> Yes: >> >> CONFIG_NODES_SHIFT=6 >> >> What I don't get is that 2.6.32 and -git print the same PXM map, and in >> both cases it's totalling exactly 64G. Yet it says: >> >> SRAT: PXMs only cover 49035MB of your 65419MB e820 RAM. Not used. > > Clue: > > [ 0.000000] SRAT: Node 0 PXM 0 0-80000000 > [ 0.000000] SRAT: Node 0 PXM 0 100000000-480000000 > [ 0.000000] SRAT: Node 2 PXM 1 480000000-880000000 > [ 0.000000] SRAT: Node 1 PXM 2 880000000-c80000000 > [ 0.000000] SRAT: Node 3 PXM 3 c80000000-1080000000 > [ 0.000000] NUMA: Using 31 for the hash shift. > [ 0.000000] pxm0: 0-480000 (4718592), absent 553990 > [ 0.000000] pxm1: 880000-c80000 (4194304), absent 0 > [ 0.000000] pxm2: 480000-880000 (4194304), absent 4194304 > [ 0.000000] pxm3: c80000-1080000 (4194304), absent 0 > [ 0.000000] SRAT: PXMs only cover 49035MB of your 65419MB e820 RAM. Not used. > [ 0.000000] SRAT: SRAT not used. > oh, i post one patch last week, can you check it? YH --------------030902050905090103040605 Content-Type: message/rfc822; name="Attached Message" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="Attached Message" Message-ID: <4B2579D2.3010201@kernel.org> Date: Sun, 13 Dec 2009 15:33:38 -0800 From: Yinghai Lu User-Agent: Thunderbird 2.0.0.23 (X11/20090817) MIME-Version: 1.0 To: Ingo Molnar , Thomas Gleixner , "H. Peter Anvin" , Andrew Morton , Mel Gorman , Suresh Siddha CC: "linux-kernel@vger.kernel.org" Subject: [PATCH] x86: fix checking of SRAT when node0 ram is not from 0 -v2 References: <4B249143.5050300@kernel.org> In-Reply-To: <4B249143.5050300@kernel.org> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Found one system that boot from socket1 instead of socket0, SRAT get rejected... [ 0.000000] SRAT: Node 1 PXM 0 0-a0000 [ 0.000000] SRAT: Node 1 PXM 0 100000-80000000 [ 0.000000] SRAT: Node 1 PXM 0 100000000-2080000000 [ 0.000000] SRAT: Node 0 PXM 1 2080000000-4080000000 [ 0.000000] SRAT: Node 2 PXM 2 4080000000-6080000000 [ 0.000000] SRAT: Node 3 PXM 3 6080000000-8080000000 [ 0.000000] SRAT: Node 4 PXM 4 8080000000-a080000000 [ 0.000000] SRAT: Node 5 PXM 5 a080000000-c080000000 [ 0.000000] SRAT: Node 6 PXM 6 c080000000-e080000000 [ 0.000000] SRAT: Node 7 PXM 7 e080000000-10080000000 ... [ 0.000000] NUMA: Allocated memnodemap from 500000 - 701040 [ 0.000000] NUMA: Using 20 for the hash shift. [ 0.000000] Adding active range (0, 0x2080000, 0x4080000) 0 entries of 3200 used [ 0.000000] Adding active range (1, 0x0, 0x96) 1 entries of 3200 used [ 0.000000] Adding active range (1, 0x100, 0x7f750) 2 entries of 3200 used [ 0.000000] Adding active range (1, 0x100000, 0x2080000) 3 entries of 3200 used [ 0.000000] Adding active range (2, 0x4080000, 0x6080000) 4 entries of 3200 used [ 0.000000] Adding active range (3, 0x6080000, 0x8080000) 5 entries of 3200 used [ 0.000000] Adding active range (4, 0x8080000, 0xa080000) 6 entries of 3200 used [ 0.000000] Adding active range (5, 0xa080000, 0xc080000) 7 entries of 3200 used [ 0.000000] Adding active range (6, 0xc080000, 0xe080000) 8 entries of 3200 used [ 0.000000] Adding active range (7, 0xe080000, 0x10080000) 9 entries of 3200 used [ 0.000000] SRAT: PXMs only cover 917504MB of your 1048566MB e820 RAM. Not used. [ 0.000000] SRAT: SRAT not used. the early_node_map is not sorted because node0 with non zero start come first. so try to sort it right away after all regions are registered. -v2: make it more solid to handle cross node case like node0 [0,4g), [8,12g) and node1 [4g, 8g), [12g, 16g) Signed-off-by: Yinghai Lu --- arch/x86/mm/srat_32.c | 2 ++ arch/x86/mm/srat_64.c | 4 +++- include/linux/mm.h | 3 +++ mm/page_alloc.c | 4 ++-- 4 files changed, 10 insertions(+), 3 deletions(-) Index: linux-2.6/arch/x86/mm/srat_32.c =================================================================== --- linux-2.6.orig/arch/x86/mm/srat_32.c +++ linux-2.6/arch/x86/mm/srat_32.c @@ -267,6 +267,8 @@ int __init get_memcfg_from_srat(void) e820_register_active_regions(chunk->nid, chunk->start_pfn, min(chunk->end_pfn, max_pfn)); } + /* for out of order entries in SRAT */ + sort_node_map(); for_each_online_node(nid) { unsigned long start = node_start_pfn[nid]; Index: linux-2.6/arch/x86/mm/srat_64.c =================================================================== --- linux-2.6.orig/arch/x86/mm/srat_64.c +++ linux-2.6/arch/x86/mm/srat_64.c @@ -317,7 +317,7 @@ static int __init nodes_cover_memory(con unsigned long s = nodes[i].start >> PAGE_SHIFT; unsigned long e = nodes[i].end >> PAGE_SHIFT; pxmram += e - s; - pxmram -= absent_pages_in_range(s, e); + pxmram -= __absent_pages_in_range(i, s, e); if ((long)pxmram < 0) pxmram = 0; } @@ -373,6 +373,8 @@ int __init acpi_scan_nodes(unsigned long for_each_node_mask(i, nodes_parsed) e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT, nodes[i].end >> PAGE_SHIFT); + /* for out of order entries in SRAT */ + sort_node_map(); if (!nodes_cover_memory(nodes)) { bad_srat(); return -1; Index: linux-2.6/include/linux/mm.h =================================================================== --- linux-2.6.orig/include/linux/mm.h +++ linux-2.6/include/linux/mm.h @@ -1022,6 +1022,9 @@ extern void add_active_range(unsigned in extern void remove_active_range(unsigned int nid, unsigned long start_pfn, unsigned long end_pfn); extern void remove_all_active_ranges(void); +void sort_node_map(void); +unsigned long __absent_pages_in_range(int nid, unsigned long start_pfn, + unsigned long end_pfn); extern unsigned long absent_pages_in_range(unsigned long start_pfn, unsigned long end_pfn); extern void get_pfn_range_for_nid(unsigned int nid, Index: linux-2.6/mm/page_alloc.c =================================================================== --- linux-2.6.orig/mm/page_alloc.c +++ linux-2.6/mm/page_alloc.c @@ -3573,7 +3573,7 @@ static unsigned long __meminit zone_span * Return the number of holes in a range on a node. If nid is MAX_NUMNODES, * then all holes in the requested range will be accounted for. */ -static unsigned long __meminit __absent_pages_in_range(int nid, +unsigned long __meminit __absent_pages_in_range(int nid, unsigned long range_start_pfn, unsigned long range_end_pfn) { @@ -4102,7 +4102,7 @@ static int __init cmp_node_active_region } /* sort the node_map by start_pfn */ -static void __init sort_node_map(void) +void __init sort_node_map(void) { sort(early_node_map, (size_t)nr_nodemap_entries, sizeof(struct node_active_region), --------------030902050905090103040605-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/