lkml.org 
[lkml]   [2009]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 32/58] tty: sdio_uart: Style fixes
Date
From: Alan Cox <alan@linux.intel.com>

Running the current code through checkpatch shows a few bits of noise
mostly but not entirely from before the changes.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/mmc/card/sdio_uart.c | 23 ++++++++++++-----------
1 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index 2104397..b999972 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -465,7 +465,8 @@ static void sdio_uart_transmit_chars(struct sdio_uart_port *port)

tty = tty_port_tty_get(&port->port);

- if (tty == NULL || circ_empty(xmit) || tty->stopped || tty->hw_stopped) {
+ if (tty == NULL || circ_empty(xmit) ||
+ tty->stopped || tty->hw_stopped) {
sdio_uart_stop_tx(port);
tty_kref_put(tty);
return;
@@ -645,7 +646,7 @@ static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty)
*/
sdio_out(port, UART_LCR, UART_LCR_WLEN8);

- port->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE;
+ port->ier = UART_IER_RLSI|UART_IER_RDI|UART_IER_RTOIE|UART_IER_UUE;
port->mctrl = TIOCM_OUT2;

sdio_uart_change_speed(port, tty->termios, NULL);
@@ -674,7 +675,6 @@ err1:
return ret;
}

-
/**
* sdio_uart_shutdown - stop hardware
* @tport: tty port to shut down
@@ -745,7 +745,6 @@ static int sdio_uart_install(struct tty_driver *driver, struct tty_struct *tty)
} else
sdio_uart_port_put(port);
return ret;
-
}

/**
@@ -785,7 +784,7 @@ static void sdio_uart_hangup(struct tty_struct *tty)
tty_port_hangup(&port->port);
}

-static int sdio_uart_write(struct tty_struct * tty, const unsigned char *buf,
+static int sdio_uart_write(struct tty_struct *tty, const unsigned char *buf,
int count)
{
struct sdio_uart_port *port = tty->driver_data;
@@ -810,7 +809,7 @@ static int sdio_uart_write(struct tty_struct * tty, const unsigned char *buf,
}
spin_unlock(&port->write_lock);

- if ( !(port->ier & UART_IER_THRI)) {
+ if (!(port->ier & UART_IER_THRI)) {
int err = sdio_uart_claim_func(port);
if (!err) {
sdio_uart_start_tx(port);
@@ -897,7 +896,8 @@ static void sdio_uart_unthrottle(struct tty_struct *tty)
sdio_uart_release_func(port);
}

-static void sdio_uart_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+static void sdio_uart_set_termios(struct tty_struct *tty,
+ struct ktermios *old_termios)
{
struct sdio_uart_port *port = tty->driver_data;
unsigned int cflag = tty->termios->c_cflag;
@@ -976,7 +976,7 @@ static int sdio_uart_tiocmset(struct tty_struct *tty, struct file *file,
int result;

result = sdio_uart_claim_func(port);
- if(!result) {
+ if (!result) {
sdio_uart_update_mctrl(port, set, clear);
sdio_uart_release_func(port);
}
@@ -994,7 +994,7 @@ static int sdio_uart_proc_show(struct seq_file *m, void *v)
struct sdio_uart_port *port = sdio_uart_port_get(i);
if (port) {
seq_printf(m, "%d: uart:SDIO", i);
- if(capable(CAP_SYS_ADMIN)) {
+ if (capable(CAP_SYS_ADMIN)) {
seq_printf(m, " tx:%d rx:%d",
port->icount.tx, port->icount.rx);
if (port->icount.frame)
@@ -1100,7 +1100,7 @@ static int sdio_uart_probe(struct sdio_func *func,
}
if (!tpl) {
printk(KERN_WARNING
- "%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
+ "%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
sdio_func_id(func));
kfree(port);
return -EINVAL;
@@ -1133,7 +1133,8 @@ static int sdio_uart_probe(struct sdio_func *func,
kfree(port);
} else {
struct device *dev;
- dev = tty_register_device(sdio_uart_tty_driver, port->index, &func->dev);
+ dev = tty_register_device(sdio_uart_tty_driver,
+ port->index, &func->dev);
if (IS_ERR(dev)) {
sdio_uart_port_remove(port);
ret = PTR_ERR(dev);
--
1.6.5.5


\
 
 \ /
  Last update: 2009-12-12 00:39    [W:0.456 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site