lkml.org 
[lkml]   [2009]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [lm-sensors] [PATCH] hwmon: Add driver for intel PCI thermal subsystem
From
On Fri, Dec 11, 2009 at 5:38 PM, Matthew Garrett <mjg59@srcf.ucam.org> wrote:
> On Fri, Dec 11, 2009 at 05:36:59PM +0100, Luca Tettamanti wrote:
>> On Fri, Dec 11, 2009 at 5:33 PM, Matthew Garrett <mjg59@srcf.ucam.org> wrote:
>> >> Does it plays nice with other drivers?
>> >> More specifically: is it possible to load the native driver and this
>> >> one (which I presume pokes at the same chip) at the same time?
>> >
>> > What do you mean by native driver? This is a native driver for the chip
>> > in question.
>>
>> I mean the driver for the hwmon chip attached to I2C/SMB bus.
>
> This is the hwmon chip.

Sorry, I think we're not understanding each other :)
Does the PCH samples the values directly from the probes? Or is it an
interface for the real monitoring chip (most likely the superio chip)?
In the latter case it might be possible to access directly the
monitoring hardware using another driver (e.g. w83627ehf, lm80, etc.),
thus racing against the PCI driver.
Did I make myself clear?

thanks,
Luca


\
 
 \ /
  Last update: 2009-12-11 17:49    [W:0.112 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site