lkml.org 
[lkml]   [2008]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [linux-pm] Tyan S2923-E suspend to ram fails to resume
On Mon 2008-08-04 22:56:07, Simon Arlott wrote:
> My system (Tyan S2923-E, dmesg attached) suspends ok in
> all pm_test modes, but it won't resume with pm_test
> "none".
>
> [ 6.423515] mem full: hash matches
>
> When I press the power button, the port 80 display shows:
> FF D0 23 01 D0 ... DE
> (and again each time I press it)
>
> If I force it to turn off, then on again:
> FF D0 23 01 D0 ... FF D0 23 01 D0 ... (D2?) D3 00 01 D5
> D6 <normal boot>
>
> Any ideas? (onboard SAS is disabled, watchdog is
> disabled, everything else is enabled, PCI-E graphics
> card)

Try verifying if it reaches assembly code under realmode/ ...


--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html


\
 
 \ /
  Last update: 2008-08-08 09:55    [W:0.103 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site